What does the 01 Ultra Texture Engine mean?

1 Answers
SamanthaLynn
07/28/25 10:29pm
01 Ultra Texture Engine is used to enhance low-frame video content into high-frame content. Technologies included: The 01 Ultra Texture Engine is used to enhance low-frame video content into high-frame content, incorporating two technologies: MotionClear video dynamic frame interpolation and HDR video quality enhancement. Functions of the 01 Ultra Texture Engine: Among them, MotionClear video dynamic frame interpolation can significantly increase video from 30 frames to 60 frames or even 120 frames, eliminating motion jitter, trailing, and staircase-like contours, enhancing clarity for smoother viewing. Meanwhile, HDR video quality enhancement supports hardware-level SDR to HDR video conversion, achieving HDR video quality enhancement.
Was this review help?
1
1
Share
More Forum Discussions

Is It Normal for the Sunroof to Drip Water?

Sunroof dripping water is not normal. The reasons for sunroof leakage are, firstly, issues with the sunroof drainage outlets. A common phenomenon is blockage by dust, branches, leaves, etc., preventing normal drainage and leading to rainwater seepage, which is a frequent problem with sunroof leaks. Another reason is aging of the rubber seals. Some reasons for water inside the car: Rainwater entering through the windshield: It could be that the windshield is not properly closed, allowing rainwater to enter during rainy weather, resulting in water under the seats. Ensure windows are closed to prevent water ingress. Poor door sealing: If the rubber seals are not installed correctly, repeated closing and squeezing of the doors can cause deformation of the seals on both sides, leading to poor sealing. In severe cases, this might even cause water to pour into the car during rain. Sunroof leakage: The sunroof is sealed with rubber gaskets. During use, it's important to protect these seals from dust, especially in winter or after long trips. Regularly clean them with a duster. Additionally, never force open the sunroof when it's frozen, as this can damage the sunroof motor.
9
1
Share

What to Pay Attention to When Buying a Car in Full Payment

When buying a car in full payment, pay attention to the following: 1. Vehicle Inspection: 1. Check the exterior: Whether the white film is intact, whether there are scratches after washing, whether the paint is scratched, whether the tire hairs are neat and dense, and whether the interior decoration is intact (seats, center console, steering wheel, doors and windows, sunshades, etc.). 2. Check the air conditioning system: Turn on the air conditioning to see if the buttons are flexible and if it can cool quickly. 3. Check the multimedia system: USB, radio, (CD) for any faults, sound for any flaws, whether the navigation is normal, and whether video playback is normal. 4. Check the center console instrument display: Generally, the mileage should not exceed 30 kilometers, and check if the screen display is normal. 5. Check all electronic functions: Rearview mirror adjustment, seat adjustment and heating, memory (if any), window and door lifting, sunroof adjustment, etc. 6. Check the engine compartment: Whether it is clean, whether the windshield washer fluid and electrical system are intact, and whether the engine oil and antifreeze are at appropriate levels. 7. Check the trunk: Whether the spare tire and tools are complete. 8. Check the chassis: Chassis protection, whether there are scratches, and cleanliness. 9. Test drive: Whether there are abnormal noises, whether the engine idle is stable, whether the engine has any noise, and whether the tire pressure is normal. 2. Vehicle Delivery Checklist: Driving license, vehicle registration certificate, tax payment certificate, car purchase invoice, insurance policy (commercial and compulsory traffic insurance), inspection certificate and compulsory insurance label, car keys, user manual (instruction manual) and maintenance manual (including three-guarantee card), one copy of the driving assistant, one environmental protection list (vehicle conformity certificate), one spare tire, one triangular warning sign, one jack and tire wrench, one small tool kit, one fire extinguisher, one cigarette lighter, one ashtray, and some gifts. 3. Explanation: In addition to compulsory traffic insurance, commercial insurance generally includes third-party liability, car damage, and no-deductible coverage. Other insurances can be selected according to personal needs.
9
2
Share

How Long is the Validity Period for Small Vehicle Inspections?

For the first 6 years, new vehicles are exempt from inspection but must obtain a new annual inspection sticker from the vehicle management office every 2 years. Therefore, the validity period on the vehicle registration certificate is also updated every 2 years. Simply prepare the required vehicle documents and visit the vehicle management office to receive the annual inspection sticker without an actual vehicle inspection. After 6 years, vehicles must be inspected annually, and after 15 years, inspections are required every 6 months. Here is some related information about vehicle inspection validity periods: Example: For instance, if the validity period is until April 30, 2015, it means the vehicle's inspection is valid until the end of April 2015. The owner should schedule the inspection accordingly, preferably 1 or 2 months in advance. Note: Vehicles can undergo inspection applications up to 3 months before the annual inspection date. It is best to schedule the inspection 2 months or a little over a month in advance, rather than waiting until just a few days before the inspection expires. Driving with an expired inspection is illegal, so it is important to complete the annual inspection before the validity period ends.
11
4
Share

What procedures are required for motorcycle license review?

Within 900 days before the expiration of the motorcycle license, you can apply for review and renewal procedures at the vehicle management office with your ID card, driver's license, and health certificate. When applying, you should fill out the application form and submit the identity proof of the motor vehicle driver, the motor vehicle driver's license, and the proof of physical condition issued by a medical institution at or above the county level or the military regiment level. The following is a related introduction to the motorcycle license: Basic introduction: Motorcycle licenses are divided into D and E licenses. The D license is for ordinary tricycles with an E license attached, and the E license is for ordinary two-wheeled motorcycles. If you have a C1 driver's license and want to ride a motorcycle, it is best to add a D or E license, so that you can legally ride a motorcycle on the road. Test content: The subject one test is a theoretical test with 50 questions, a full score of 100, and a passing score of 90 or above. Subjects two and three are taken together, and the test items generally include pile test, slope fixed-point parking and starting, passing a single-plank bridge, and are supervised by police and examiners.
17
4
Share

What is the problem if the right corner of the parking space cannot be seen during reverse parking?

The rearview mirror may be set too high, preventing you from seeing the corner of the parking space. Alternatively, your reverse parking habit might cause the car to lean too far to the right, making it impossible to see the entire edge of the parking space. If the angle of reverse parking is correct, then the issue likely lies with the improper adjustment of the right rearview mirror. Below are some related tips: Parking Tips: Engage the reverse gear and keep the steering wheel turned to the leftmost position while reversing. The driver should observe the left rearview mirror and adjust the direction to guide the rear of the car into the parking space. Once the car is inside the parking space, the driver should check the right rearview mirror. When the entire right line of the parking space becomes visible, immediately straighten the steering wheel. Then, shift focus to the left rearview mirror and stop the car when the left door handle aligns horizontally with the bottom line of the parking space. Control the driving path carefully during the test. The car's path mainly depends on the speed of steering wheel rotation and driving speed. While reversing, aim for the edge line and adjust the direction promptly to ensure the car enters the parking space straight. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It refers to the field driving skill test. For the C1 license, the test includes five mandatory items: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Some regions may include a sixth item, such as highway toll card collection. For the C2 license, the test includes four mandatory items: reverse parking, parallel parking, right-angle turns, and curve driving (commonly known as S-turns).
18
2
Share

What engine does the Mitsubishi Lancer use?

The engine of the Mitsubishi Lancer is produced by Harbin Dongan Automobile Engine Factory and is a domestically manufactured engine. The engine model of the Mitsubishi Lancer is DA4G18, with a maximum power of 73kW, a maximum torque of 136Nm, and a maximum horsepower of 100. For daily maintenance of the Mitsubishi Lancer engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area and accelerating engine wear, increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.