What does TC mean when displayed on the Malibu dashboard?

1 Answers
DelAdrian
07/29/25 5:19pm
When TC is displayed on the Malibu dashboard, it indicates a fault in or deactivation of the Traction Control system. The purpose of the TC system is to maintain the vehicle's trajectory in accordance with the driver's control. When this system is active, it can prevent wheels with lower grip from slipping on surfaces with better traction, ensuring the vehicle moves more in line with the driver's intentions. The exterior design of the Malibu draws inspiration from Chevrolet's legendary sports cars, the Corvette and Camaro, strongly reflecting an American-style, powerful, and sporty aesthetic. The dimensions of this car are 4855mm in length, 1854mm in width, 1477mm in height, with a wheelbase of 2737mm.
Was this review help?
6
1
Share
More Forum Discussions

How to deregister a motorcycle that has failed its annual inspection?

Motor vehicles that have not undergone annual inspection for over one year will be automatically deregistered in the computer system. Motor vehicles that have not undergone annual inspection for over two years may have their paper records destroyed or archived. For vehicles that have exceeded the inspection deadline, bring relevant documents such as the vehicle license to the traffic police vehicle management office to complete the annual inspection procedures.
4
2
Share

What to Do When the Motorcycle Lock Cylinder is Damaged?

The shell screws are located on both sides of the casing. The lock wires are at the bottom of the lock, usually consisting of four wires: red, black, green, and black-white. Be careful when cutting to avoid causing the positive and negative poles to touch. When the colored wire and the red wire touch, sparks may occur, which is a normal phenomenon. After connecting them, wrap them with black tape, and then you can start the motorcycle to go and replace the lock.
2
0
Share

Basic Procedures and Methods for Vehicle Inspection

Observe the vehicle license plate to check if it is secured with specialized anti-theft screws. Conduct control checks to determine if it is a suspicious vehicle, including inspecting the vehicle's exterior license plate, body for any signs of impact, front bumper, and other parts of the vehicle.
4
1
Share

How to reset the tire pressure warning on Geely Emgrand GL?

The method to reset the tire pressure warning on Geely Emgrand GL is: 1. Press the vehicle's one-button start to ignite the engine, and the dashboard will display the tire pressure information; 2. Press the SET button on the left side of the multifunction steering wheel; 3. Press the MODE button on the right side of the multifunction steering wheel; 4. Press the cancel button on the left side of the multifunction keyboard. Taking the 2021 Geely Emgrand GL as an example, its body dimensions are: length 4725mm, width 1802mm, height 1478mm, wheelbase 2700mm, and fuel tank capacity 55 liters. The 2021 Geely Emgrand GL is equipped with a 1.4L turbocharged engine, with a maximum horsepower of 141 and a maximum power of 104 kW.
19
1
Share

When Should Car Engine Oil Be Changed?

Car engine oil change intervals depend on the type of oil: 1. Fully synthetic oil should be changed every 10,000 kilometers or 1 year; 2. Semi-synthetic oil should be changed every 7,500 kilometers or 7 to 8 months; 3. Mineral oil should be changed every 5,000 kilometers or 6 months. Precautions for changing car engine oil include: 1. Perform the change when the engine is warm to ensure thorough drainage of old oil; 2. Add new oil ensuring the correct quantity; 3. After adding oil, start the engine to check for leaks, then run the engine for 3 minutes to confirm the oil level reaches the normal mark.
16
3
Share

How Often Should a Car Engine Timing Belt Be Replaced?

Car engine timing belts should be replaced every 3 to 5 years. The timing belt is a crucial component of the engine's valve system. The replacement method is as follows: 1. Lift the vehicle and remove the right front wheel fender liner; 2. Remove the generator belt and the generator belt tensioner; 3. Loosen the crankshaft pulley screws; 4. Open the engine hood and remove the water tank; 5. Remove the engine mounting bracket and the protective cover on the timing belt; 6. Unscrew the generator mounting screws and remove the generator; 7. Remove the cylinder block mounting bracket and take off the crankshaft pulley; 8. Rotate the crankshaft to the top dead center position of the cylinder and mark it; 9. Remove the timing belt and the timing tensioner to complete the replacement.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.