What does supercar mean?

1 Answers
DeBeckett
07/30/25 2:02am
Supercar refers to high-performance sports cars that typically feature powerful engine output and striking exterior designs, with top speeds exceeding 300 kilometers per hour. Most supercars are equipped with only two seats. Examples of supercar models include the Audi R8, Ferrari 488, Ferrari Portofino, Ferrari SF90, McLaren 720S, and McLaren 570. Taking the 2019 McLaren 720S 4.0T Spider as an example: its dimensions are 4544mm in length, 1930mm in width, and 1194mm in height, with a wheelbase of 2670mm. It is equipped with a 7-speed dual-clutch transmission, features a 2-door, 2-seater hardtop coupe body style, and utilizes double-wishbone independent suspension for both front and rear. The drivetrain configuration is mid-engine, rear-wheel drive.
Was this review help?
7
1
Share
More Forum Discussions

Where are U-turns prohibited for motor vehicles?

According to Article 49 of the "Regulations for the Implementation of the Road Traffic Safety Law": Motor vehicles are prohibited from making U-turns at locations with no U-turn or no left turn signs/markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or sections of road prone to danger. Below are relevant details about U-turns: 1. Motor vehicles may make U-turns at locations without no U-turn or no left turn signs/markings, provided they do not impede the normal passage of other vehicles and pedestrians. 2. At locations where U-turns are permitted and a dedicated U-turn traffic signal is installed, U-turns should be made during the green light phase. 3. If there is no dedicated U-turn signal but corresponding signs indicate U-turns during red or green lights, U-turns should be made according to the sign instructions. 4. If there is neither a dedicated U-turn signal nor other signage, U-turns may be made without being restricted by traffic signals, but must not impede the normal passage of vehicles and pedestrians.
3
1
Share

What kind of engine oil is suitable for Toyota Corolla 1.2T?

Toyota Corolla 1.2T is recommended to use the original genuine Toyota oil. The following are the selection methods for oil models and precautions for engine oil: Selection methods for oil models: Generally in winter, many regions recommend using 5W oil, while some areas in the northern regions should use 0W oil for better cold-start performance to meet local environmental conditions. For high-temperature viscosity, engine oil with a lubricant viscosity value of 20 is usually used. However, if the vehicle is frequently driven in congested roads, relatively old, or used for long-distance transportation with light loads, the oil viscosity can be appropriately increased, such as using 0W30 lubricant. Precautions for engine oil: When adding engine oil, it is necessary to add the appropriate amount according to the vehicle's displacement, and absolutely avoid adding too much. If the engine oil is insufficient, the bearings and journals in the engine part will experience friction due to insufficient lubrication, exacerbating wear and tear, and in severe cases, it may cause a bearing seizure accident. When selecting the appropriate engine oil, it is necessary to strictly follow the oil grade specified in the user manual. If the same grade of oil is not available, only a higher-grade oil can be used, and a lower-grade oil must never be used as a substitute.
6
4
Share

Will stalling in the waiting area of Subject 2 result in point deduction?

Stalling the engine once due to improper operation will result in a 10-point deduction. Other common situations that lead to point deductions include: Vehicle body crossing the line, failing to reverse into the parking space, stopping midway, not following the prescribed route or sequence, or exceeding the time limit will result in a 100-point deduction. For slope parking: Parking with the right side of the vehicle body more than 30 cm from the roadside line will result in a 10-point deduction, while more than 50 cm will result in a 100-point deduction; rolling back or touching the line will result in a 100-point deduction; if the front bumper is not aligned with the pole line and the deviation is within 50 cm, it will result in a 10-point deduction, while a deviation exceeding 50 cm will result in a 100-point deduction. Subject 2 has a full score of 100 points, with evaluation criteria set for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The test is considered passed under the following conditions: ① For applicants of large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required.
1
3
Share

What is the fuel tank capacity of the Toyota Camry in liters?

The Toyota Camry has a total of 10 models. Among them, four models - the 2021 Camry Hybrid 2.5HQ Flagship, Leading, Sport, and Luxury editions - have a fuel tank capacity of 49 liters. The remaining six models have a fuel tank capacity of 60 liters. All models in the lineup feature front-engine, front-wheel-drive configuration. Among vehicles in the same class, the 2022 Buick Regal 552T Smart Enjoy edition has a 55-liter fuel tank, the 2022 Honda Accord 260TURBO Comfort edition has a 56-liter tank, and the 2021 Citroën C6 400THP Comfort edition has a 70-liter tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by automakers is measured from the tank bottom to the safe fill level, with additional space remaining from the safe fill level to the tank opening. This extra space ensures that fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual refueling quantity may exceed the marked tank capacity. To check remaining fuel levels, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while nearing F means sufficient fuel.
14
1
Share

Is it better to use internal or external air circulation when driving in the rain?

It is better to use external air circulation when driving in the rain. On rainy days, the cold weather causes fog to form on both side windows, obstructing the driver's vision. Therefore, it is best to first use the external air circulation mode and adjust the airflow direction towards the windshield. Using external circulation helps expel the moisture exhaled by passengers from the vehicle, while the outside cold air is less prone to condensation. Methods for using internal circulation: 1. When the outside air quality is poor or heavily polluted, such as on dusty roads, in congested traffic, or near chemical plants with foul odors or unusual smells; use internal circulation to prevent bad outside air from entering the vehicle. 2. In summer, to quickly cool down the interior with air conditioning, internal circulation can be used. 3. In winter, using internal circulation can help keep the interior warmer. Methods for using external circulation: 1. When internal circulation has been used for an extended period and opening the windows is inconvenient, periodically switch to external circulation to allow fresh air into the vehicle. 2. When there are many passengers in the vehicle, using external circulation can maintain fresh air and prevent excessive humidity inside that could lead to window fogging. Both internal and external circulation methods can enhance comfort to some extent. Choose the appropriate mode based on the situation. Sometimes, combining the use of window controls with internal and external circulation can also reduce the burden on the air conditioning system.
15
3
Share

Does Audi Spark Plug Need to Be Replaced Every 20,000 Kilometers?

According to the official maintenance manual of Audi vehicles, the spark plugs should be replaced every 20,000 kilometers. Main types of spark plugs include: standard spark plugs, extended tip spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs. Replacement cycle for spark plugs: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is recommended to follow the user manual. You can refer to the following standards for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Working principle of spark plugs: Under high voltage, the air between the center electrode and the side electrode of the spark plug rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties and forming a discharge channel, resulting in a "breakdown" phenomenon. At this point, the gas forms a luminous body, known as a "spark." Along with the heat expansion, a "crackling" sound is also produced. The temperature of this electric spark can reach as high as 2,000-3,000°C, which is sufficient to ignite the air-fuel mixture in the engine combustion chamber.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.