···
Log in / Register

What Does Subject 3 Test Cover?

4 Answers
LeLuke
09/06/25 4:17am

Subject 3 generally refers to the road driving skills test and the safety and civilized driving knowledge test. Introduction to Subject 3: It includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. Subject 3 includes: The road driving skills test is divided into 16 items: preparation before getting on the car, starting, driving in a straight line, shifting gears, turning left at an intersection, turning right at an intersection, changing lanes, passing through an intersection, parking by the roadside, passing through a pedestrian crossing, passing through a school area, passing through a bus station, meeting another vehicle, overtaking, making a U-turn, and driving at night.

Was this review help?
13
2
Share
McLuna
09/18/25 4:13am

When I was taking the Driving Test Part 3, my heart was in my throat. The test mainly involved actual on-road driving. The examiner sat beside me, designated the route, and I had to complete pre-start checks like adjusting mirrors and signaling before smoothly accelerating without stalling. On the road, I needed to check blind spots when changing lanes, slow down for turns, watch for pedestrians at intersections, and park precisely without crossing lines. The night portion tested lighting operations, such as switching between high and low beams. I practiced over a dozen times before passing because I forgot to signal the first time and got points deducted. The key is to simulate real road conditions, familiarize yourself with the test route, and stay calm. Safety comes first—wearing a seatbelt is mandatory, or you fail immediately. The test instilled good habits; now I instinctively observe my surroundings while driving and feel my skills have improved significantly.

Was this review help?
3
0
Share
Expand All
Wood
11/01/25 4:40am

The content of the Subject 3 driving test is very practical, as it involves actual road driving tests. It includes operations such as starting the vehicle, driving straight, changing lanes, passing through intersections, slowing down before pedestrian crossings, and parking. During the night test, you are also examined on the use of lights, such as correctly turning them on and off. When I took the test, the examiner focused on your safety awareness, such as signaling for at least three seconds before changing lanes and checking the rearview mirror. Details determine success or failure; even a slight oversight can lead to point deductions. It's important to practice frequently on busy roads to improve reaction speed. Before the test, check the vehicle's condition to avoid letting minor issues affect your performance. Passing the test boosts your confidence in driving, but always remember that safety is the core—avoid rushing or speeding.

Was this review help?
7
0
Share
Expand All
Isabelle
12/15/25 4:48am

Subject 3 tests practical driving skills, including starting and stopping, lane changing and turning, crossing intersections, and nighttime lighting. Don't be nervous during the exam; I failed once because I didn't check the blind spot. Pay more attention to traffic signals and observation during practice. The examiner scores based on rule compliance. The secret is to simulate the test route more often, familiarize yourself with the environment, and maintain a steady speed. Don't be afraid if you fail; there are many retake opportunities, and safety is the top priority.

Was this review help?
18
3
Share
Expand All
More Forum Discussions

What brand is grenlanoer tires?

grenlander is Grandland tires. Grandland tires are a tire brand produced by Shandong Longyue Rubber Co., Ltd. in China. The company innovatively develops green, safe, low rolling resistance, low noise, and anti-wet slip high-end tires. It has also developed anti-static, anti-explosion, and some special differentiated dedicated tires. In terms of independent innovation capability and core technology, it ranks at the advanced level in the industry, and the product performance meets the high-end standards of the second phase of the European labeling law. The maintenance methods for tires are as follows: 1. Regularly check tire pressure. 2. Frequently inspect the wear condition of the tires. 3. Promptly remove small stones and other foreign objects from the tires. 4. Rotate the tires on time. 5. Perform wheel alignment regularly.
3
0
Share

Where is the SWM G05 produced?

SWM G05 is produced by Huachen Xinyuan Company. SWM (Shiwei) was originally an Italian brand and has been wholly acquired by Xinyuan Company. SWM G05 exterior design: The vehicle overall draws design elements from the SWM G01. In terms of details, the designers have used more sharp lines on its body, especially the large front grille, paired with the headlight design formed by geometric polygonal splicing, creating a visually imposing effect. The SWM G05 has a body size of 4750x1860x1780 mm in length, width, and height, with a wheelbase of 2750 mm. The car also features an oversized panoramic sunroof with an area of up to 1 square meter, and a trunk space with a maximum capacity of 1920 liters. At the rear, the car adopts the currently popular full-width taillights, which not only add a sense of fashion to the rear but also enrich the layering of the tail, while the air intakes on both sides give a strong sense of sportiness. SWM G05 powertrain: It is equipped with both 2.0L and 1.5T engines, with the 1.5T engine delivering a maximum power of 156 horsepower and a peak torque of 230 Nm. In terms of transmission, the 1.5T model offers a choice between a 6MT and a 6AT, with the 6-speed automatic transmission provided by Dongan; the 2.0L model only comes with a manual transmission and is standardly equipped with a 5-speed manual gearbox. For the chassis, the new car features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
1
4
Share

What to Do When the Remote Control Fails?

The solutions for a malfunctioning remote control are as follows: First, remove the battery cover of the remote control and check if the battery is low or dead. Replace it with a new battery if necessary. If the remote control still doesn't work after replacing the battery, remove the back cover of the remote control, use a cotton swab dipped in alcohol to clean the contacts on the circuit board, and then reassemble the remote control. The reasons for remote control failure are as follows: 1. Poor contact between the resistor ball on the remote key and the two sensing contacts on the ignition switch. 2. The remote control has been subjected to strong impact or dropped on a hard surface, causing the resistor inside the remote control to break or become demagnetized. 3. The remote control chip is damp or dirty, causing a short circuit or open circuit. 4. The resistance value of the remote control itself has changed, resulting in remote control failure.
2
4
Share

Is it necessary to fasten the seat belt for Subject 2?

It is necessary to fasten the seat belt for Subject 2. Below are the precautions for getting into the car for Subject 2: 1. Getting into the car: When there is no time limit for starting, close the car door first after getting in, and check if the car is turned off, which is crucial. 2. Adjusting the seat: Press the clutch pedal all the way down with your left foot and hold it, grip the steering wheel with your right hand, and adjust the seat with your left hand until your left foot is slightly bent and can exert force. Also, check the seat's stability by moving it back and forth. Adjust the backrest to a 90-degree angle with your body and ensure its stability by testing it back and forth. Then, place your hand on your head to measure if the height is the same as during regular practice. If it's too low, adjust it with a seat cushion. 4. Adjusting the left and right rearview mirrors: Adjust them to the appropriate positions. Key points for adjusting the left rearview mirror: Place the horizontal line at the center of the mirror, then adjust the car's edge to occupy 1/4 of the mirror's image. Key points for adjusting the right rearview mirror: Place the horizontal line at 2/3 of the mirror, then adjust the car's edge to occupy 1/4 of the mirror's image. 5. Fastening the seat belt: After fastening the seat belt, test the clutch again by pressing it all the way down with your left foot. Ensure your left foot is slightly bent and can exert force; otherwise, readjust. Then, test the brake pedal and the accelerator to confirm everything is fine before starting the test.
10
2
Share

Should You Release the Handbrake or Shift into Gear First When Starting the Car?

When starting the car, you should shift into gear first, then release the handbrake. On uneven roads, there may also be issues with the throttle or clutch. Shifting into gear before releasing the handbrake can prevent the car from rolling forward or backward, thus avoiding dangerous situations. The correct steps for starting the car are as follows: 1. Adjust the seat properly after getting in the car. An improper sitting posture may cause abnormalities while driving. 2. Start the engine, then observe whether there are any abnormalities in the indicator lights on the dashboard. 3. Press the clutch pedal all the way down with your left foot. If the clutch pedal is not fully depressed, it can easily damage the transmission gears. 4. Shift into first gear, then release the parking brake lever, i.e., the handbrake. 5. Release the clutch. 6. Gently press the accelerator.
12
0
Share

Can the BYD F0 seat be adjusted for height?

The BYD F0 seat cannot be adjusted for height. The seat can be moved forward and backward, and the backrest can be adjusted for tilt to find a suitable seating position. To adjust the seat's forward and backward position, pull the horizontal lever underneath. The angle of the rear seats can be reclined, and when folded down, they provide additional space in the trunk. The BYD F0 is a compact car introduced by BYD, equipped with the company's self-developed BYD371QA high-performance eco-friendly engine, with a displacement of 1.0L, meeting the National IV emission standards. The BYD F0 comes with dual airbags, ABS, power steering, and other systems. The car's dimensions are 3.460 meters in length, 1.618 meters in width, and 1.465 meters in height, with a wheelbase of 2.34 meters.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.