What Does Subject 3 Practice?

2 Answers
SamuelMarie
07/24/25 5:04pm
Subject 3 mainly focuses on practicing the following items: vehicle preparation, starting, driving in a straight line, gear shifting operations, lane changing, etc. Below is some information about the driving test: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test, written test, computer-based, full score is 100, 90 or above is a pass (including 90). 2. Subject 2: Field driving skills test, practical test on-site, only pass or fail, including reversing into a garage, parallel parking, S-curve, right-angle turn, hill start and stop, these five items are mandatory and conducted in sequence, full score is 100, 80 or above is a pass (including 80). 3. Subject 3: Road driving skills test, practical test on the road or simulated site, full score is 100, large buses require 90 or above, large trucks require 80 or above, other vehicle types require 70 or above to pass. 4. Subject 4: Safe and civilized driving related knowledge, written test, full score is 100, 90 or above is a pass (including 90).
Was this review help?
15
1
Share
LukeAnn
08/11/25 9:28am
I usually practice Subject 3 mainly to become more proficient at driving on real roads. I still remember being very nervous during my first practice session. The instructor had me repeatedly practice starting and stopping the car, ensuring proper coordination between the accelerator and clutch to avoid jerking or stalling. Turning is also a key focus—whether left or right turns, you must use the turn signal, check the rearview mirror and blind spots in advance, and only turn after confirming there are no vehicles. Lane changing tests your reflexes even more—you must signal for at least three seconds and check the distance to vehicles on both sides. When approaching intersections, observe traffic lights, stop when necessary, and slow down even at green lights, always yielding to pedestrians. Light usage is part of the night test, learning how to turn headlights on/off and switch between high and low beams without blinding oncoming drivers. Subject 3 training isn’t just about skills—it helped me develop safety habits, like braking or avoiding sudden road hazards. Now, I feel much more confident on the road, driving as calmly as an experienced driver.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Reminder on Volkswagen Touran?

First, turn off the ignition switch to ensure the vehicle is powered off. Press and hold the 00 button under the dashboard with one hand, then turn on the ignition switch with the other hand until the maintenance service message appears in English on the instrument panel, then release the button. After releasing, press and hold the 00 button again. This will clear the maintenance reminder. Additional Information: 1. The 2018 Touran offers excellent handling and comfort along with the versatility of an MPV. The interior features no extravagant decorations, with a straightforward center console, an 8-inch color touchscreen, and simple yet practical button controls. The audio system across all models includes MP3 functionality. The spacious and comfortable cabin provides excellent flexibility, and the large trunk is perfect for family trips. 2. The overall exterior and interior design are harmonious. It is equipped with 1.8T and 2.0 large-displacement engines. The 1.8T engine delivers a maximum power of 110 kW and a peak torque of 220 Nm. The 2.0T engine produces a maximum power of 85 kW and a peak torque of 170 Nm.
13
0
Share

How to Check the Production Date of Yokohama Tires?

The production date of Yokohama tires can be found on the outer side of the tire. First, locate the three letters DOT, followed by four numbers which indicate the production date. Typically, it consists of a four-digit number "AABB," where the first two digits "AA" represent the week of the year the tire was produced, and the last two digits "BB" represent the year. Here is some information about Yokohama tires: Yokohama Tires is a world-renowned premium tire brand. Over 90 years, Yokohama Tires has honed its technology and accumulated experience, establishing itself as a solid position as a comprehensive rubber manufacturer.
18
0
Share

What is the x80?

x80 is the Lifan X80 from Lifan Motors. Below are the specific details about the Lifan X80: 1. The Lifan X80 is positioned as a midsize SUV. Its front face features the pinyin logo "LIFAN," a hexagonal grille adorned with five thin chrome strips, and a silver skid plate under the bumper, giving it a rugged off-road appeal. 2. In terms of exterior features, the base model X80 comes with 17-inch wheels, roof rails, automatic headlights, daytime running lights, and front/rear parking sensors. The Comfort trim adds 19-inch wheels, a sunroof, heated/electrically folding side mirrors, keyless entry/start, and front fog lights. The top-tier Luxury trim further includes rain-sensing wipers. 3. The Lifan X80 is powered by a 2.0T turbocharged engine, delivering a maximum output of 141kW (192PS) and a peak torque of 286Nm. It is paired with either a 6MT or 6AT transmission. For the chassis, the vehicle adopts a front MacPherson/rear double-wishbone independent suspension setup.
5
5
Share

What is the Difference Between Glazing and Crystal Coating?

The differences between glazing and crystal coating are as follows: 1. Different Definitions: The essence of glazing is similar to waxing. The "glaze" is extracted from petroleum and mixed with auxiliary materials. After cleaning the car surface, the "glaze" is applied through vibration, allowing it to fully penetrate the paint. Crystal coating involves using inorganic substances like silicon dioxide, which forms a strong crystalline barrier on the surface through molecular polymerization. This barrier resists UV rays, oil, has low surface energy, and is hydrophobic, thus protecting the paint. 2. Different Functions: Glazing blocks UV rays, prevents oxidation, resists high temperatures and acid rain, reduces minor scratches, enhances the gloss and hardness of the original paint, extends the paint's lifespan, and slows down browning. Crystal coating is currently the most advanced car paint protection solution, offering advantages such as corrosion resistance, scratch prevention, no cracking, and easy cleaning. It protects the vehicle from daily minor scratches. Even when external forces exceed the elastic protection range of the crystal, it usually only leaves scratches on the crystal layer without damaging the paint. 3. Different Durability: Glazing lasts relatively shorter than crystal coating, typically 6 to 8 months, providing substantial protection to the paint and making the car's surface smooth and soft. However, its protection duration is shorter than crystal coating, and its hardness is inferior. Crystal coating is more durable and stable, lasting 1-2 years, offering genuine paint protection. However, crystal coating is more expensive, takes about 2 days to apply, and requires higher technical skills from the technician.
15
2
Share

Will the 4S Store Help with Scratches on a Newly Purchased Car?

New car scratches are not handled by the 4S store. This is because scratches on a new car are considered human-induced factors and not vehicle quality issues, hence they are not covered under warranty. However, you can opt to file an insurance claim, have the loss assessor evaluate and determine the damage before proceeding with repairs. This approach can help avoid unnecessary repair costs that may not be reimbursable. Tips to prevent scratches on a new car: 1. Affix a novice driver sign: Placing a novice driver sign can serve as a reminder for vehicles behind to maintain a safe distance. 2. Choose the appropriate lane: When driving on narrow roads, try to stay on the left side. New drivers often struggle with judging distances on both sides, but their ability to gauge the left side is slightly better than the right. Therefore, driving in the left lane tends to be safer. 3. Be cautious when making U-turns: Always check the traffic signs and observe surrounding vehicles before making a U-turn to ensure safety. 4. Safe reversing: Always slow down and use the rearview mirror and reversing camera to allow yourself time to react. This helps in promptly responding to any unexpected situations. Regular practice with the rearview mirror can enhance your driving skills.
3
3
Share

How to Reset the Tire Pressure on a Haval H6?

Haval H6 tire pressure reset method: 1. First, park the Haval H6 in a garage or a safe area to avoid any danger. 2. Then, open the main display screen of the Great Wall Haval H6 and click the settings icon in the lower right corner. 3. Next, click on the tire pressure initialization option on the Haval H6 display screen. The following are the recommended tire pressures for the car: Front tires should be inflated to 2.2 to 2.3 bar when unloaded and 2.4 to 2.5 bar when fully loaded. Rear tires should be inflated to 2.4 to 2.5 bar when unloaded and 2.6 to 2.8 bar when fully loaded.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.