What Does Steering Wheel Gear Shifting Mean?

2 Answers
Keira
08/27/25 7:53am
Steering wheel gear shifting refers to models equipped with paddle shifters on the steering wheel. Here is a related introduction to paddle shifters: 1. Function: Paddle shifters are gear-shifting devices found in some automatic transmission vehicles, allowing drivers to shift gears directly via the paddles without using the gear selector lever. This feature is widely used in sports cars and coupes focused on performance. As a quick-shifting device, paddle shifters significantly enhance driving operability. 2. Operation: Paddle shifters are typically located behind the steering wheel. When using them, drivers usually only need to shift into D (Drive), S (Sport), or manual mode. With paddle shifters, drivers can perform upshifts and downshifts without taking their hands off the steering wheel.
Was this review help?
12
4
Share
MacSimon
09/09/25 6:38am
Steering wheel paddle shifters are one of the most practical features I've encountered. They refer to small paddles or buttons installed on the steering wheel that allow drivers to manually control gear shifts without reaching for the gear lever. When I used to drive automatic transmission cars, I always felt a lack of control freedom, but after installing steering wheel shifters, it feels just like driving a manual car - effortless and natural. The left paddle downshifts, the right paddle upshifts - the operation is simple and quick. Especially during turns or overtaking, a light press instantly shifts gears to boost power, making driving more enjoyable. This design keeps both hands on the steering wheel at all times, improving safety and reducing distractions. Of course, it's not a cure-all - it might feel somewhat redundant in congested urban traffic - but overall I highly recommend this optional feature for car owners. First-time users might need a few tries to get accustomed to it; don't worry about accidental operations, you'll master it after several drives. Just remember to periodically check if these small components are functioning properly.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Where is the transmission of the Bestune T99 produced?

The transmission of the Bestune T99 is produced in China. It is Shengrui's third-generation 8AT transmission. The Bestune T99 is a mid-to-large-sized SUV under the Bestune brand, equipped with a 2.0-liter turbocharged engine across the entire lineup, delivering a maximum power of 224 horsepower and a maximum torque of 340 Nm. The Bestune T99 is a 5-door, 5-seater model with body dimensions of 4800mm in length, 1915mm in width, and 1695mm in height, a wheelbase of 2870mm, a fuel tank capacity of 60 liters, a trunk capacity of 377 liters, and a curb weight of 1775kg. In terms of suspension, this vehicle adopts a MacPherson independent suspension and a multi-link independent suspension.
18
3
Share

What Does the Second Vehicle Maintenance Generally Include?

Vehicle second maintenance generally includes the transmission, engine, body suspension, braking and steering systems, tires, etc. If the inspection and maintenance during the second service are performed thoroughly, it can elevate the overall vehicle condition significantly, greatly ensuring driving safety. Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. Modern vehicle maintenance primarily encompasses the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, among others. The purpose of vehicle maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
5
4
Share

What is the purpose of an oil cooler?

The function of an oil cooler is to cool the lubricating oil and maintain its temperature within the normal operating range. In high-power reinforced engines, due to the substantial thermal load during operation, the viscosity of the engine oil decreases as the temperature rises, thereby reducing its lubricating capability. Hence, it is essential to install an oil cooler. When the engine is running, the oil forms a thin film on the surfaces of various components inside the engine, preventing direct contact and friction between them. If the engine components were to come into direct contact and generate friction, it would instantaneously produce a significant amount of heat. Excessive engine temperature can adversely affect the engine's normal operation.
16
4
Share

How to Adjust the Headlights of Honda Vezel?

Honda Vezel headlight adjustment method: The headlight adjustment button is located on the center console to the left of the steering wheel. Simply turn the knob to adjust; the higher the number on the knob, the lower the headlight height. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only affect the owner's external image but are also closely related to safe driving at night or in bad weather conditions. Taking the 2020 Honda Vezel as an example, it is a compact SUV with body dimensions of 4328mm in length, 1772mm in width, and 1605mm in height, a wheelbase of 2610mm, a fuel tank capacity of 50 liters, and a body weight of 1227kg. This car is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131PS, a maximum torque of 155Nm, and a maximum power of 96kW, paired with a 6-speed manual transmission.
15
4
Share

What is the reason for the jerking at low speeds with a CVT?

CVT low-speed jerking is caused by: this CVT transmission has simulated gears. Although it is a continuously variable transmission, it also has gear ratios. A normal CVT transmission should not produce jerking sensations. If the jerking feels very severe, it is necessary to promptly visit a 4S shop or a professional auto repair shop to have the staff inspect and identify the issue. Only by determining the root cause can the problem be properly fixed. The CVT transmission does not have clearly defined gears, and the changes in gear ratios are very continuous, resulting in smooth and uninterrupted power delivery. Representative car models that use CVT transmissions are Japanese cars, with the vast majority of Japanese automatic transmissions utilizing CVT. The advantages of CVT transmissions are smoothness, fuel efficiency, and a very seamless driving experience.
17
0
Share

Is Carbon Deposit Cleaning Necessary?

Cleaning carbon deposits is necessary because there is currently no complete method to prevent their formation. Without regular cleaning, carbon deposits can accumulate indefinitely. Once carbon deposits build up, minor issues such as engine shaking and reduced power may occur; in severe cases, it can lead to engine cylinder scoring, seizure, or even knocking. Therefore, regular cleaning of engine carbon deposits is essential. Causes of carbon deposit formation: 1. Prolonged operation under heavy load; 2. Frequently pressing the accelerator heavily at low RPM; 3. Extended idling or low-speed operation; 4. Excessive warm-up time after cold starts; 5. Driving at high gears with low RPM.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.