What does SRS mean?

2 Answers
Gray
07/25/25 8:09am
SRS stands for Supplemental Restraint System (electronic-control-of-safety-airbag), which is a very important safety feature in automobiles. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In the event of a car collision, the airbag can reduce head injuries by 25% and facial injuries by approximately 80%. With the establishment of vehicle safety standards in various countries, the installation rate of airbags has been increasing. When a collision occurs while the car is in motion, the airbag sensor first receives the impact signal. If the impact reaches the specified intensity, the sensor activates and sends a signal to the electronic controller. Upon receiving the signal, the electronic controller compares it with its stored data. If the conditions for airbag deployment are met, the driving circuit sends an activation signal to the gas generator in the airbag assembly. The gas generator ignites the gas-producing agent upon receiving the signal, generating a large amount of gas. This gas is filtered and cooled before entering the airbag, causing the airbag to rapidly inflate within an extremely short time, breaking through the padding. It forms an elastic cushion in front of the driver or passenger, then promptly deflates and contracts to absorb the impact energy, effectively protecting the head and chest from injury or reducing the severity of injuries.
Was this review help?
12
1
Share
OAndres
08/10/25 6:49pm
As a driver with over 20 years of experience, SRS stands for Supplemental Restraint System, which is the abbreviation for the airbag system. This thing plays a crucial role in cars, such as automatically deploying airbags during a collision to protect the driver and passengers, preventing serious injuries. I must say, it's a standard safety feature in modern vehicles, and when used in conjunction with seat belts, it can significantly reduce the risk of casualties. I remember once being involved in a rear-end collision where the airbags deployed in time, preventing serious injuries—I'm truly grateful for this technology. When driving daily, pay attention to the SRS light on the dashboard; if it stays on, it might indicate a system issue that needs immediate inspection. Remember, the SRS includes components like airbags and sensors, and maintaining them ensures they function when it matters most. Safety is no small matter, so don’t overlook these details.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How to Solve the Heavy Clutch Problem in Tiggo 3?

Tiggo 3 heavy clutch can be resolved through the following 4 methods: 1. Check if the clutch pedal, release bearing, etc., return to their normal positions. If normal, proceed with further checks. 2. Inspect whether the fixing bolts of the engine bracket, transmission, flywheel, and flywheel housing are loose. If so, tighten the bolts; otherwise, continue checking. 3. Examine if the inner ends of the release levers are on the same plane. If they are, proceed with further checks. 4. Check if the pressure plate and driven plate are deformed, if the rivets are loose or exposed, and if the pressure spring's elasticity is out of the allowable range. If any of these conditions are found, replace or repair the affected parts. Additional Information: Shuddering during startup can be considered from the perspective of unsteady clutch engagement during the starting process. That is, the engine runs at a constant speed, but due to unsteady clutch engagement, the driven part of the clutch rotates unsteadily, resulting in vibrations in the clutch and even the entire vehicle body.
20
1
Share

What is the emergency stopping lane on the highway exclusively used for?

Emergency stopping lane, at certain intervals on the highway, the right side of the road is widened or a certain width and length of the road surface is reserved, exclusively for emergency stopping; some are set at curves, for vehicles that cannot follow the normal route due to loss of control or malfunction to stop urgently or for emergency use. Extended content, related introduction to the emergency stopping lane: 1. Definition: The emergency stopping lane refers to a temporary stopping area on highways and first-class roads, used for vehicles that experience temporary malfunctions or other reasons requiring emergency stopping. 2. Introduction: The spacing of emergency stopping lanes is mainly determined by considering the possible distance a malfunctioning vehicle can travel and the distance that can be pushed manually. In China, the spacing of emergency stopping lanes on highways and first-class roads is approximately 750m. 3. Terminology explanation: The so-called "emergency stopping lane" is, as the name suggests, reserved for "emergency situations." The setting of emergency stopping lanes on the roadside of highways is designed to ensure smooth traffic flow and reduce interference from accident or malfunctioning vehicles.
1
1
Share

What is the reason for the black screen flickering issue in BYD Song's multimedia system?

It is likely a wiring issue. Check if the screen's wiring harness is loose. Inspect whether the contacts are normal, and carefully examine the wiring connections at the navigation device's ports to see if the vibration during driving caused the wiring ports to loosen and detach. Solutions: 1. Check the navigation software: Verify whether the navigation device's software is genuine or pirated. If it is pirated software, compatibility issues may arise, requiring the reinstallation of genuine software to resolve the problem. 2. Determine if it is caused by an upgrade: After upgrading the navigation device, some issues may occur, mainly because the original device may not fully support the new version of the software. In such cases, contact the manufacturer to replace the navigation device body for a solution. 3. Reset button: There is a reset button near the disc slot of the navigation device. Gently press it with a toothpick or a paperclip to reset and restore normal functionality.
2
1
Share

How to Turn on the Heater in the Teramont?

Rotate the air conditioning temperature adjustment knob to the heating zone, then adjust the air vent direction and speed as needed. Below is an introduction to the air conditioning heating function: 1. After turning on the heater, set the air circulation mode to internal circulation to help the car warm up quickly. Switch to external circulation as needed to promote air flow inside the car. When the engine is running, incomplete fuel combustion produces high concentrations of carbon monoxide. If the car is stationary with the heater on and the windows closed, carbon monoxide from the engine can accumulate and reach dangerous levels. Therefore, avoid running the heater while parked. 2. Do not turn on the heater immediately after entering the car, especially in winter. Starting the car in winter can be difficult, and it is necessary to warm up the engine first before driving. The temperature inside the car will still be low when you first enter. Wait until the coolant temperature rises before turning on the heater to avoid potential engine wear and other issues.
7
1
Share

What does the 'hold' function on a car key mean?

Car key 'hold' refers to the function of long-pressing to open the trunk. By holding the 'hold' button for a few seconds, you can easily open the trunk, simplifying the process of opening the car door first and then the trunk. The requirement to hold the button for a few seconds to open the trunk is designed to prevent the danger of accidentally opening the trunk while the vehicle is in motion or under other conditions. For some cars, the 'hold' button also serves as a remote engine start button. By holding it for 2 to 3 seconds within a certain range, the car will start automatically. Car keys can be categorized into three types based on their operation methods: active operation, passive operation, and coil induction. The principle of active operation involves controlling the car door through the vehicle's electronic module and body control module. Coil induction operation mainly involves placing an encrypted chip inside the key. During the unlocking process, the vehicle's radio frequency transceiver verifies whether the key matches to determine if the engine can be started. Passive operation works when the owner enters the sensing range of the key system. As soon as the hand touches the door handle, the identity-recognition 'key' carried by the owner will receive a low-frequency signal sent by the car. If this signal matches the identity information stored in the 'key', the 'key' will be activated.
16
0
Share

How many kilometers can a full tank of fuel last for the Geely Vision X3?

It can run approximately 550 kilometers. The average fuel consumption of the Vision X3 is 5.6 liters/100 km to 6.5 liters/100 km. Below is some related information about the Vision X3: 1. Side Profile: From the side, the Geely Vision X3 features straight waistlines, and the lower edge of the side skirts is equipped with silver anti-scratch strips. The roof also comes with a luggage rack. Additionally, the Vision X3 is fitted with stylish ten-spoke sporty wheels. 2. Configuration: In terms of configuration, the Vision X3 includes features such as an electric sunroof, integrated roof luggage rack, rear parking sensors, rearview camera, side mirrors with integrated turn signals, LED daytime running lights, fender chrome decorations, black anti-scratch strips, silver anti-scratch trims, dual-tone ten-spoke sporty wheels, and red brake calipers. It is powered by a 1.5L naturally aspirated engine with the model number JLB-4G15, delivering a maximum output power of 75 kW (102 PS).
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.