What does SRS in cars mean?

2 Answers
McKyle
09/06/25 7:56am
Car SRS stands for Supplemental Restraint System, which refers to the airbag. The airbag is a passive safety protection system that provides effective protective measures. When a car experiences a certain level of impact, the airbag deploys to protect the occupants. After a collision, the car's SRS airbag can reduce head injuries by 25% and facial injuries by 80%. Below is an introduction to airbags: 1. Airbag: It is a car safety protection system primarily designed to provide protection in frontal collisions. 2. When the front of the vehicle is impacted: The igniter at the center of the airbag inflator is activated by the sensor, igniting the sodium azide particles in the inflator, releasing gas primarily composed of nitrogen. The gas passes through a filter to remove ash and impurities before entering the airbag to inflate it. 3. The fiber materials used in airbags: They require high strength, good thermal stability, energy absorption, excellent coating adhesion, and the ability to maintain functionality under extreme high or low temperatures. They are often made of nylon or polyester.
Was this review help?
17
0
Share
DiBrady
09/18/25 7:32am
When it comes to automotive SRS, it's literally a life-saving system! With over a decade of driving experience, I can tell you this: SRS stands for Supplemental Restraint System, which is essentially the airbag setup. During a collision, it inflates instantly to cushion the impact, preventing your head and chest from hitting the steering wheel. This system relies on precise sensors—like those mounted on the front bumper—that detect a severe crash and trigger airbag inflation in a flash. It works in tandem with seatbelts, hence the term 'supplemental'; airbags alone aren't enough—seatbelts do the heavy lifting. I recall a minor accident where the airbag didn’t deploy because the speed was insufficient, but routine maintenance is crucial—watch the SRS light on the dashboard: a brief illumination at startup indicates normal self-check, while a persistent glow signals an issue—head to the dealership immediately. Understanding SRS adds peace of mind while driving—never overlook these critical details.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How to adjust the rearview mirrors on a Geely Boyue?

The method to adjust the rearview mirrors on a Geely Boyue is as follows: 1. Locate the small knob among the window control buttons on the driver's side door panel; 2. Turn it to the 'L' position to adjust the left rearview mirror up, down, left, or right; 3. Turn it to the 'R' position to adjust the right rearview mirror up, down, left, or right. Taking the 2020 Geely Boyue as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, a wheelbase of 2670mm, a fuel tank capacity of 58 liters, and a curb weight of 1575kg.
2
3
Share

What are the differences between Volkswagen ID.6X and ID.6 CROZZ?

Volkswagen ID.6X and ID.6 CROZZ have the following differences: 1. Brand difference: ID.6X is an SUV model under SAIC Volkswagen, while ID.6 CROZZ is an SUV model under FAW-Volkswagen. Both models are positioned as large 7-seater intelligent pure electric SUVs and come from the same parent company, both being brands under the Volkswagen Group; 2. Appearance difference: ID.6X and ID.6 CROZZ feature a floating light folding body contour with rounded body line designs; ID.6X is more understated in detail treatment, and while the overall vehicle is not as exaggerated as ID.6 CROZZ, it does not lose its sense of refinement; ID.6X has a richer layered design at the rear, with horizontal lines that visually widen the vehicle, and a luminous logo in the middle of the full-width taillight, giving it a very dynamic appearance;
16
1
Share

What is the minimum speed limit for a two-lane road with a maximum of 120?

For a two-lane road, the speed limit is 120 km/h maximum and 60 km/h minimum: 1. Highways should indicate the speed limit for each lane. The maximum speed must not exceed 120 km/h, and the minimum speed must not be lower than 60 km/h. 2. On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h. 3. For roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h. For roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. If the speed limit indicated by road signs differs from the above regulations, drivers should follow the speed limit indicated by the road signs.
4
3
Share

What Causes a Car to Park Too Far to the Right in Parallel Parking?

During the parallel parking test, parking too close to the right side is usually due to turning the steering wheel too late. If the driver turns the wheel too late in the final stage of parking, the right side of the vehicle may cross the solid line, resulting in a failed test. Below are the detailed requirements for parallel parking: 1. Operation Requirements: The driver must maneuver the vehicle into the right parking space without the wheels touching the lane boundary or the parking space boundary. 2. Test Criteria: (1) If the vehicle's body crosses the line after coming to a stop in the parking space, 100 points will be deducted. (2) If the wheels touch the lane boundary during the maneuver, 10 points will be deducted. (3) Failing to park within the designated space results in a deduction of 100 points. (4) Not activating the left turn signal when starting deducts 10 points. (5) Stopping midway deducts 100 points.
16
2
Share

What is the working principle of a brake proportioning valve?

Brake proportioning valve is a valve that distributes braking force to the four wheels. During vehicle braking, the state where the wheels stop rotating and slide on the ground is called lock-up. If the rear wheels lock up before the front wheels, it can cause fishtailing or even dangerous spin-outs. The brake proportioning valve can regulate the brake fluid based on the vehicle load and road resistance conditions within a very short time, ensuring that the braking force applied to the front and rear brake pads approaches the ideal curve. This helps to some extent in preventing skidding and wheel lock-up, reducing braking distance, and enhancing braking effectiveness. Additional information: When the brake proportioning valve malfunctions, braking effectiveness decreases, braking distance increases, and during emergency braking, the rear wheels will lock up first, causing the rear of the vehicle to become unstable or even leading to rollovers.
9
4
Share

What kind of grease is used for brake guide pins?

Brake guide pins typically use calcium-based grease (butter) with certain water resistance. Since the guide pins are exposed, and vehicles often drive through water during rainy seasons, calcium-based grease has water resistance that prevents it from being washed away, ensuring the braking system functions properly. Engine oil is strictly prohibited for brake caliper guide pins because it can easily be washed away by water, leading to loss of lubrication and potential seizing of the guide pins, resulting in brake failure. Here is more information about brake guide pins: 1. Maintenance: Brake system maintenance helps prevent high temperatures, rust, corrosion, and ensures lubrication. 2. Consequences of abnormal brake guide pins: (1) If the guide pins of the brake caliper are poorly lubricated or stuck, abnormal braking may occur, leading to ineffective braking or dragging brakes. (2) If the guide plates at both ends of the brake pads oxidize or rust, it will affect the sliding movement of the brake pads.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.