What does 'sport' mean on a car?

Is Car Cooling Spray Harmful to the Human Body?

Car cooling spray is not harmful to the human body. Cooling spray is a specialized product designed for vehicles, which can rapidly reduce the temperature inside the car within minutes by simply spraying it on the car's surface or any interior decorations. The following is an introduction to car cooling spray: 1. Definition and Composition: Car cooling spray is a formulation that can quickly lower the temperature inside the car, primarily composed of dry ice, softened water, and a small amount of fragrance. 2. Features: Rapid cooling, non-toxic, non-corrosive, pollution-free, environmentally friendly, with no side effects on the human body, and it is also portable and easy to use.

18

3

Share

How to Deal with Clogged Sunroof Drainage in a Bora?

You can use an air pump gun, aiming at the drainage holes of the two front drainage pipes inside the sunroof, and use high-pressure airflow to clear the drainage pipes. Here is an introduction to the related content: 1. Sunroof: The left and right sides of the sunroof are two sliding rails that ensure the sunroof slides back and forth. At the front left and right corners of the sliding rails are the drainage holes of the sunroof. 2. Common issues: Clogged or broken drainage pipes can result in water leaking from the sunroof seam and dripping into the interior. If broken, it can also cause water leakage in the car's A-pillar and C-pillar. Another issue is the aging of the sunroof's sealing strip, leading to water leakage from the sunroof.

11

3

Share

What Causes the Metallic Friction Sound When Pressing the Accelerator?

Pressing the accelerator and hearing a metallic friction sound is usually caused by carbon buildup in the intake system. It is recommended to visit a repair shop for cleaning. Below is an introduction to related car noise issues: 1. Car Half-Shaft Problem: Under long-term torsional fatigue and impact forces, the car's half-shaft is prone to bending, twisting, breaking, or wear and tear on the spline teeth. This can cause the car to shake rhythmically when accelerating within a certain speed range, accompanied by noise. The shaking disappears or lessens when the accelerator is released. 2. Loose Engine Belt: A slipping belt can produce abnormal noise. Once the belt slips, the resulting friction and heat can cause the belt to stretch further, worsening the slippage and creating a vicious cycle. In this case, it is necessary to visit a repair shop to adjust the belt.

17

4

Share

Does Crossing the Stop Line with Front Wheels Count as Running a Red Light?

Crossing the stop line with front wheels during a red light does not count as running a red light. Running a red light refers to the act of a motor vehicle violating traffic signal instructions by crossing the stop line and continuing to drive when the red light is on and prohibits passage. Determining a red light violation requires at least three pieces of photographic evidence: the vehicle has not left the stop line when the red light is on; the vehicle has passed the intersection when the red light is on; the vehicle has crossed the line and continued to move forward when the red light is on. Article 26 of the "Road Traffic Safety Law": Traffic signals consist of red, green, and yellow lights. The red light indicates prohibition of passage, the green light indicates permission to pass, and the yellow light indicates a warning. Article 44: Motor vehicles passing through intersections shall do so in accordance with traffic signals, traffic signs, traffic markings, or the command of traffic police. Article 2, Paragraph 1, Subparagraph 2 of the "Scoring Standards for Road Traffic Safety Violations" stipulates that driving a motor vehicle in violation of road traffic signals will result in a deduction of 6 points per violation. Ways to avoid running a red light: When there is an arrow signal light, follow the arrow light; otherwise, follow the circular light; When the red light is on, the front of the vehicle must not cross the stop line; When the yellow light is on, the front of the vehicle must not cross the stop line; When the green light just flashes, if the distance is close and the speed is fast, you should pass through, as it may be impossible to stop in time and you might cross the stop line; if the distance is far, the speed is slow, or the intersection is congested, you should stop; When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line and approach an intersection.

1

5

Share

What is the model and brand of Lynk & Co car engine oil?

Lynk & Co 01 uses Shell SN engine oil with the model number 0W-20. The following is a detailed introduction about Lynk & Co cars: 1. Lynk & Co 01: Lynk & Co 01 is the first model developed based on the CMA basic modular architecture. It is equipped with the Drive-E series 2.0TD turbocharged engine, offering class-leading fuel economy and dynamic performance. Lynk & Co 01 adopts a comprehensive NVH luxury configuration, which can prevent noise and vibration from the source. 2. Lynk & Co 02: As the second model of the Lynk & Co brand, Lynk & Co 02 is positioned as a high-energy coupe SUV. It is equipped with the Drive-E series 2.0TD engine from Volvo, with a maximum power of 140kW (190Ps) and a peak torque of 300Nm.

20

0

Share

What Procedures Are Required for the Inspection of a B2 Driver's License?

Procedures required for the inspection of a B2 driver's license: 1. Holders of a B2 driver's license should report to the traffic management department of the public security bureau for inspection within thirty days after the end of each scoring cycle. 2. If there are no demerit points recorded during a scoring cycle, the inspection for that cycle is exempted. During the inspection, the driver must fill out a form truthfully declaring their physical condition, and there is no need to submit a medical certificate of physical condition issued by a medical institution. 3. When going for the inspection, only the driver's license needs to be carried; photos are not required. The following is an introduction to the B2 driver's license: 1. Requirements for applying for a B2 driver's license: height must be at least 150 centimeters, visual acuity in both eyes must reach at least 4.9 on the logarithmic visual acuity chart, age must be between 21 and 60 years old, no red-green color blindness, ability to discern the direction of sound from a tuning fork at 50 centimeters, both thumbs must be intact and each hand must have three intact fingers, normal upper limb and finger motor function, and normal lower limb motor function. 2. Permitted vehicle types: The B2 license allows the holder to drive heavy-duty, medium-duty trucks or large, heavy, medium-sized specialized operation vehicles, with heavy-duty and medium-duty trucks mainly being trucks.

6

1

Share

What does 'sport' mean on a car?

Is Car Cooling Spray Harmful to the Human Body?

How to Deal with Clogged Sunroof Drainage in a Bora?

What Causes the Metallic Friction Sound When Pressing the Accelerator?

Does Crossing the Stop Line with Front Wheels Count as Running a Red Light?

What is the model and brand of Lynk & Co car engine oil?

What Procedures Are Required for the Inspection of a B2 Driver's License?

Are Suzuki car engines domestically produced or imported?

What is the classification of automotive engine oil?

How many kilometers can a tank of oil last for the Leiling Hybrid?

When is the nationwide implementation time for China VI?