What does 'snow' on the dashboard mean?

Where is Jetour Motors Produced?

Jetour Motors is produced in Kaifeng, Henan. Jetour Motors is a subsidiary brand of Chery Automobile, mainly producing SUV models, including the X70, X90, X70S, and others. Taking the X90 as an example: it is a six-seater SUV launched by Chery Holding Jetour, with body dimensions of 4840mm in length, 1925mm in width, and 1745mm in height, and a wheelbase of 2850mm. The X90 is equipped with a 1.6T direct-injection engine, delivering a maximum power of 197 horsepower and a maximum torque of 290 Nm. The transmission system is a 7-speed dual-clutch gearbox, featuring front MacPherson and rear multi-link independent suspensions. In terms of appearance, the vehicle's grille adopts a three-dimensional mesh shape with polygonal edges, creating a more visually striking effect. The dual waistline design keeps the side profile dynamic while enhancing the visual width of the front and rear fenders, giving the car a strong presence.

2

Share

What does 3T on tires mean?

3T on tires refers to: TREADWEAR wear resistance index, TRACTION traction ability, and TEMPERATURE temperature index. The specific meanings of 3T are: 1. The wear resistance index reflects the tire's wear resistance. The higher the value, the more wear-resistant the tire is, and the harder the rubber, resulting in poorer comfort. Conversely, the lower the value, the less wear-resistant the tire is, and the softer the rubber, leading to better comfort. 2. The traction index is a parameter that measures the tire's grip performance on wet and slippery roads. 3. The temperature index grade reflects the tire's own heat dissipation capability. As the speed increases, the temperature of the tire also rises. If the tire's own heat dissipation capability is poor or cannot withstand the rapidly rising temperature, its stability during high-speed driving will be greatly compromised. The higher the grade of the tire, the more it can reduce heat generation, and the longer its service life.

19

5

Share

What are the four basic types of car insurance?

Vehicle insurance's four basic types refer to vehicle damage insurance, third-party liability insurance, no-deductible insurance, and seat insurance. Below is a detailed introduction to the four basic types of vehicle insurance: 1. Vehicle damage insurance: Vehicle damage insurance is a type of commercial auto insurance where the insurer compensates within a reasonable range for damage to the insured vehicle caused by an insurance accident while the vehicle is being used by the insured or an authorized driver. 2. Third-party liability insurance: This refers to the insurer's responsibility to compensate for economic liabilities that the insured must legally bear when an accident occurs during the use of the insured vehicle by the insured or an authorized driver, resulting in bodily injury, death, or direct property damage to a third party. 3. No-deductible insurance: No-deductible insurance is an additional type of commercial insurance. As an add-on, no-deductible insurance requires the purchase of a 'primary insurance' as a prerequisite and cannot be purchased separately. 4. Seat insurance: Seat insurance refers to compensation by the insurer for medical expenses or accident payments when an accident involving the insured vehicle results in injury or death to the driver or passengers.

13

0

Share

How to Conduct Annual Inspection for Vehicles Within Ten Years?

Here is the relevant introduction to the new regulations for vehicles within ten years: 1. Exemption Scope: The exemption scope for motor vehicles has been expanded from the original 6 years and under for vehicles with 6 seats or fewer to non-operational mini and small passenger vehicles with 7-9 seats. This means that after November 20th, non-operational mini and small passenger vehicles with 7-9 seats that are under 6 years old can enjoy the exemption policy. 2. Inspection Cycle: For exempted vehicles, the first 6 years can skip the on-site inspection, only requiring the completion of procedures every two years. From 6-10 years, an annual inspection is required. The new regulations indicate that the inspection cycle for private vehicles in the first 6 years remains unchanged, while vehicles aged 6-10 years will change from an annual inspection to a biennial inspection. That is to say, exempted vehicles within ten years will undergo biennial inspections, but only the sixth and eighth years require on-site testing.

2

0

Share

How to Turn On the Rear Air Conditioning in Model 3?

Tesla Model 3 rear air conditioning can be turned on as follows: 1. Press the CLIMATE button on the center console panel, or touch the air conditioning icon on the entertainment main screen to enter the air conditioning settings interface. You can set the fan speed level, air outlet mode, internal and external circulation, and air conditioning temperature through the air conditioning buttons or corresponding icons in the air conditioning settings interface. 2. When adjusting the air conditioning settings through the center console panel, the entertainment main screen will briefly pop up the air conditioning settings information. The system automatically controls the fan speed, air outlet mode, air conditioning mode, and internal circulation to heat or cool the car interior to the desired temperature. 3. When the AUTO indicator light is on, the system is in full automatic operation mode. To put the system in automatic mode, press AUTO, set the temperature, wait a moment for the system to stabilize, and adjust to the most comfortable temperature as needed.

11

0

Share

What are the causes of idle vibration in the Hyundai Elantra?

The causes of idle vibration in the Hyundai Elantra: 1. Ignition system issues: Poor performance of the ignition system or improper spark plug firing can lead to idle vibration; 2. Unstable oil pressure: It is recommended that the owner visit a 4S shop to check the fuel supply pressure and the intake pressure sensor for normal operation. If the fuel pump supply pressure is abnormal or the intake pressure sensor values are incorrect or malfunctioning, it can cause body vibration; 3. Severe engine carbon buildup: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum suction and burned, making the air-fuel mixture overly rich. The engine's combustible mixture alternates between lean and rich, causing idle vibration after a cold start.

1

0

Share

What does 'snow' on the dashboard mean?

Where is Jetour Motors Produced?

What does 3T on tires mean?

What are the four basic types of car insurance?

How to Conduct Annual Inspection for Vehicles Within Ten Years?

How to Turn On the Rear Air Conditioning in Model 3?

What are the causes of idle vibration in the Hyundai Elantra?

What documents are needed for a duplicate vehicle license?

Is the WM EX5 a pure electric vehicle?

Reasons for Ice Formation in the Low-Pressure Line of a Car's Air Conditioning System

Is Audi Owned by Volkswagen?