What does single-color ambient lighting mean?

Where is the Tire Pressure Monitoring Sensor Installed?

Tire pressure monitoring sensor installation locations: Built-in sensors are installed inside the tire, which is relatively stable and provides more accurate temperature monitoring data; External types are sensors added outside the valve stem, which are more convenient to install. Direct tire pressure monitoring systems use pressure sensors installed in each tire to directly measure the tire pressure, transmitting the pressure information from inside the tire to a central receiver module via a wireless transmitter, then displaying the tire pressure data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. The working principle of indirect tire pressure monitoring is: when the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels; by comparing the differences in rotation speeds between tires, the purpose of monitoring tire pressure is achieved.

2

4

Share

How to reset the tire pressure of BAIC Senova X35?

BAIC Senova X35 tire pressure reset method is as follows: 1. First, turn on the ignition switch, start the car, light up the central display screen, and press the button; 2. Then, in the vehicle settings options, click on Tires to enter the settings; 3. Next, press the SE button; 4. Then, three buttons will appear, click OK; 5. Finally, the car will display tire pressure monitoring initialization, and after completion, the tire pressure light will reset. The BAIC Senova X35 is equipped with only one 1.5L engine codenamed A151, with maximum power and peak torque of 116 horsepower and 148 Nm respectively. The body dimensions are 4300mm in length, 1815mm in width, and 1640mm in height.

15

0

Share

What Causes Uneven Tire Wear?

Reasons for uneven tire wear: 1. Wear on both shoulder edges is caused by insufficient tire pressure or overloading; 2. Wear in the center of the tread is caused by excessive tire pressure; 3. Wear on the outer edge of the tire is caused by excessive toe-in or camber angle, or bent steering knuckle arm; 4. Wear on the inner edge of the tire is caused by insufficient toe-in or camber angle. Uneven tire wear refers to abnormal accelerated wear on the inner or outer side of one or several tires, where a specific part of one tire wears much faster than the others. Methods to prevent uneven tire wear: 1. Regularly check if U-bolts are properly tightened, and pay attention to the maintenance of tie rods, especially for new trailers during their first load or after running 1,000 kilometers; 2. Inflate tires according to the standard pressure; 3. Pay attention to tire maintenance, and regularly rotate tires to ensure even wear and effectively extend tire lifespan.

1

0

Share

Can You Just Top Up Engine Oil Randomly When It's Low?

You can top up engine oil by yourself when it's low, but you must ensure that the oil you add is the same brand and type, and mixing different oils is not allowed. Additionally, opened engine oil can be used for topping up if it's within one year, but oil that has been opened for over a year is generally ineffective and not recommended for use. Engine oil, also known as engine lubricant, provides lubrication to the engine. When the oil level is insufficient, lubrication is inadequate, increasing friction resistance and accelerating wear on the engine and its components. Prolonged oil deficiency can lead to severe consequences, such as engine overheating, causing mechanical failures in moving parts, shortening the engine's lifespan, or even rendering the engine irreparable.

6

1

Share

Abnormal Noise from the Right Front Wheel?

The causes of abnormal noise from the right front wheel are as follows: 1. Small stones stuck in the tire tread can produce a rhythmic sound when in contact with the ground. The frequency of the sound increases with speed, but the sound itself does not change. This should be checked first. 2. Inspect the wheel hub bearing for lack of lubrication, which can cause abnormal noise. 3. After parking, check the inner side of the noisy tire for any components, parts, or wiring harnesses that may interfere with the moving tire, wheel hub, or brake disc. If found, remove the interference. Additional tip: Find a flat surface, release the handbrake, turn off the engine, and push the car to listen carefully to which tire is making the noise. Then, eliminate the possible causes one by one.

14

4

Share

How to use the ASR in the car?

The ASR in the car is turned on by default and does not require manual operation. More information about ASR is as follows: 1. ASR is the Anti-Slip Regulation system, full name: Acceleration-Slip-Regulation, which is an active safety device for cars, also known as the traction control system. It prevents the driving wheels from slipping when starting or accelerating, especially for high-powered vehicles, to maintain the stability of the vehicle's driving direction. 2. The principle of ASR: When the driving wheels slip, ASR compares the speed of each wheel, and the electronic system determines that the driving wheels are slipping. It automatically reduces the throttle intake and lowers the engine speed, thereby reducing power output and braking the slipping driving wheels.

4

5

Share

What does single-color ambient lighting mean?

Where is the Tire Pressure Monitoring Sensor Installed?

How to reset the tire pressure of BAIC Senova X35?

What Causes Uneven Tire Wear?

Can You Just Top Up Engine Oil Randomly When It's Low?

Abnormal Noise from the Right Front Wheel?

How to use the ASR in the car?

What causes water leakage in the interior dome light?

Why does the car AC make noise and not cool when turned on?

Where is the best place to put a fire extinguisher in a car?

What Causes Squealing and Ineffective Braking During Emergency Stops?