What does 'side' mean on a car?

Can Someone Drive an Automatic Car for the First Time Without Prior Experience?

It is possible for someone to drive an automatic car for the first time under guidance. You can start the car by placing the gear in N (Neutral) or P (Park), and drive with an experienced driver accompanying you from 58 Auto. Below are some key points to note: Starting the Car: Place the gear in N or P to start the car. After starting the engine, wait a few seconds before shifting gears to allow the transmission to be fully lubricated. Press the brake pedal, shift to the correct gear, release the brake, and the car will start normally. While Driving: When driving on the road, place the gear lever in D (Drive) and gradually increase the throttle. On short or small slopes, place the lever in D or L (Low) and control the throttle to complete the ascent. Driving in Snow: When driving downhill, use D gear along with the brake to control the vehicle. In snowy conditions, place the lever in L gear to start, preventing the drive wheels from slipping. Once the car is moving, shift to D gear.

9

3

Share

Can a car be driven away after 2 hours of touch-up painting?

After 2 hours of touch-up painting, the car cannot be driven away. Below is relevant knowledge about car touch-up painting: Methods of car touch-up painting: Clean the dirty areas of the paint with water and a clean towel, then thoroughly dry the area with the towel. Use tape to outline the scratched area, ensuring it is outlined slightly higher. Shake the primer pen evenly, then use the brush of the primer pen to apply directly to the scratched area. Be careful not to apply the primer too thickly. After application, wait for 15 minutes. Then, use the same method to apply the color paint. After all applications, wait for 24 hours to allow the paint to dry completely before removing the tape. Purpose of car touch-up painting: It helps maintain the car's original texture, and once the paint dries, it forms a smooth film that ensures the car's appearance remains unaffected.

4

0

Share

What is the difference between D and S gear in Golf?

The differences between D and S gear in Golf are as follows: 1. S gear is more responsive than D gear: After shifting into S gear, the upshift is delayed. While driving, if you suddenly press the accelerator, S gear will respond quickly, whereas D gear will take a bit more time. When you press the accelerator, S gear provides a more direct driving experience, while D gear is relatively smoother. 2. S gear consumes more fuel than D gear: While pursuing speed advantages, S gear also maximizes power output. Long-term use of S gear increases air intake, naturally resulting in higher fuel consumption compared to D gear. However, you won't experience the driving pleasure of S gear in D mode. 3. S gear is more powerful for uphill driving: When climbing a slope without switching to S gear, you may notice some unusual noises from the car's engine. This occurs because the engine cannot provide sufficient power at low RPMs, so it's advisable to use S gear for uphill driving.

20

1

Share

What Causes the Golf's Central Control Screen to Stop Responding?

When the touch screen of a car's central control panel becomes unresponsive, it is often due to prolonged usage leading to system crashes caused by fragmented files occupying the memory. Another possible reason could be issues with the screen's touch points, which may necessitate a complete replacement. Below is an overview of the Volkswagen Golf: 1. Model Overview: The Volkswagen Golf is a best-selling model under the Volkswagen brand, being the most produced and popular model by Volkswagen, ranking third among the world's best-selling cars. 2. Powertrain: The Volkswagen Golf is equipped with the most advanced 1.4TSI engine and a 7-speed dual-clutch transmission, offering robust performance, which is one of the key reasons for its popularity among consumers. 3. Safety Systems: In terms of active safety, as a compact car with a standard multi-collision brake system, the new Golf effectively prevents injuries from secondary collisions. It is complemented by a lane keeping system, rear traffic alert, fatigue monitoring system, tire pressure monitoring, and newly added rearview camera and blind spot monitoring among other active safety features.

9

3

Share

Does Leaving the Car Door Open Drain the Battery?

Leaving the car door open will drain the battery. Here are the relevant details: Battery Drain: Leaving the car door open will cause the battery to lose power. Prolonged periods will deplete the battery. When the car is not in use, all electrical devices inside should be turned off, the doors should be closed, and the central locking system should be engaged. The operation of car doors and windows relies on battery power, so it is best to close all windows before turning off the engine, shut the doors after turning off the engine, and use the long-press lock button method to secure the doors after leaving the car. Before Turning Off the Engine: Turn off the air conditioning and audio system before shutting down the engine. The air conditioning system involves the compressor, blower, and audio—these are high-power electrical devices. Not turning them off before shutting down the engine will place a heavy burden on the battery, potentially causing damage. Long-Term Parking: The car battery will automatically discharge during prolonged periods of inactivity. The vehicle should be used regularly to avoid issues with automatic battery discharge.

4

2

Share

Do You Need to Press the Accelerator When Shifting Gears?

You do not need to press the accelerator when shifting gears. Normally, when shifting gears, you should simultaneously depress the clutch and release the accelerator. At the moment the power is cut off, the engine speed begins to drop. If the accelerator is released too early, the engine speed may drop first, potentially causing engine braking and resulting in jerking. Below are the relevant details: 1. Transmission shifting process: During the gear shifting process, the transmission must ensure that the circumferential speeds of the pair of gear teeth to be meshed are equal (i.e., synchronized) to smoothly engage and shift into gear. If the gear teeth are not synchronized and forced into gear, it will inevitably cause impact and noise due to the speed difference between the two gear teeth. This not only makes shifting difficult but also affects the lifespan of the gear teeth, accelerating wear at the tooth ends and even leading to tooth breakage. 2. Introduction to the transmission: The function of the transmission is to change the speed and torque from the engine. It can fixedly or stepwise alter the transmission ratio between the output shaft and the input shaft. Also known as the gearbox, the transmission consists of the gear shifting mechanism and the control mechanism.

6

3

Share

What does 'side' mean on a car?

Can Someone Drive an Automatic Car for the First Time Without Prior Experience?

Can a car be driven away after 2 hours of touch-up painting?

What is the difference between D and S gear in Golf?

What Causes the Golf's Central Control Screen to Stop Responding?

Does Leaving the Car Door Open Drain the Battery?

Do You Need to Press the Accelerator When Shifting Gears?

What Causes the Metallic Sound When Driving a Golf on Bumpy Roads?

What are the pros and cons of installing a differential lock?

What are the types of automobile frame structures?

Where is the tire pressure monitoring in Golf 8?