What does 'set' mean on the vehicle display?

What to Do When a Pure Electric Vehicle Runs Out of Battery on the Highway?

Once the vehicle runs out of battery and breaks down midway, the only solution is to call a tow truck to drag the vehicle to the nearest charging pile. On highways, it's impossible to park two vehicles on the emergency lane for a charge transfer. Moreover, charging takes a considerably long time, unlike fuel vehicles that can be quickly refueled. Here are some relevant precautions: 1. Although charging piles are now equipped on highways, their numbers are limited and they often malfunction. Therefore, it's essential to plan ahead before the trip, checking whether the highway service areas along the route have functional charging piles and determining when to charge. 2. For long-distance travel in an electric vehicle on the highway, besides pre-trip planning, it's also crucial to control the vehicle's speed. Prolonged high-speed driving with deep accelerator pedal usage drains the battery very quickly. It's advisable to maintain a speed of around 90km/h to minimize battery consumption as much as possible. 3. Additionally, when the battery level drops below 30%, it's time to look for a service area to recharge. If the remaining journey isn't long, charging the battery up to 80% is sufficient, as the charging speed is fastest from 30% to 80%, typically taking only 30-40 minutes under normal circumstances.

20

0

Share

Does a New Car Need Antifreeze?

New cars do not need antifreeze. For vehicles that run for long periods, such as taxis, high-quality antifreeze should generally be replaced once a year. For vehicles with shorter operating times, it can be replaced every two years or every 30,000 kilometers. How to Choose Antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. On the market, antifreeze comes in specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose one with a freezing point at least 10°C lower than the lowest temperature in your region. How to Determine if Antifreeze is Low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze levels, though it could also be caused by excessively high engine temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Check the water level scale on the antifreeze bottle. The normal antifreeze level should be between the maximum and minimum marks. Whether antifreeze is low depends on the scale. If it is below the minimum mark, it indicates a shortage of antifreeze.

15

4

Share

What is the original brand of brake discs for the Audi Q7?

Audi Q7's original brake disc brand is TRW Teves. Simply put, a brake disc is a round disc that rotates as the vehicle moves. The brake caliper clamps the brake disc to generate braking force; when you press the brake pedal, it clamps the brake disc to slow down or stop the vehicle. Brake discs offer excellent braking performance and are easier to maintain compared to drum brakes. More details are as follows: 1. Brake discs and pads are used for braking, with the braking force coming from the brake caliper. Typically, standard brake calipers have a fixed inner section where the brake piston pump is located, while the outer section features a clamp-style structure. The inner brake pad is fixed to the piston pump, and the outer brake pad is fixed to the outer part of the caliper. 2. The piston pushes the inner brake pad via the pressure from the brake fluid line, while simultaneously pulling the caliper through reaction force, causing the outer brake pad to move inward. Both pads press against the brake disc, generating braking force through friction between the disc and the inner/outer pads. In this process, the piston is actuated by brake fluid, also known as hydraulic oil.

3

0

Share

Why Does the Car Jerk When Releasing the Accelerator?

Car jerking when releasing the accelerator is most likely caused by inexperienced driving techniques or transmission abnormalities. Below are detailed explanations of the specific reasons for car jerking when releasing the accelerator. 1. Inexperienced driving techniques. Solution: Master the timing of gear shifting, coordinate the accelerator and clutch smoothly, avoid releasing the clutch too quickly when starting, and ensure not to drag the gears when downshifting to decelerate. 2. Car jerking when releasing the accelerator could be due to transmission abnormalities. Solution: First, check if the transmission fluid is low or has deteriorated. If the transmission fluid is normal, it is recommended to visit a professional repair shop or a 4S store for a diagnostic check of the transmission control system.

3

1

Share

How to Determine When to Replace Brake Pads?

When you notice that the braking feel becomes lighter or the braking requires more effort, it's likely that the brake pads are severely worn and need immediate replacement. You can also directly inspect the wear level of the brake pads. Generally, it's recommended to check them every 3,000 kilometers. If the brake pads are worn down to one-third of their original thickness, they should be replaced. The consequences of not replacing brake pads in time are as follows: 1. First, when braking, a metallic scraping sound ("metal-to-metal contact") may occur, and this noise will become more pronounced over time. 2. Secondly, if the braking feel is lighter or requires more effort, it significantly increases the risk of traffic accidents during braking.

7

1

Share

What is the fuel consumption of the Hummer H2?

The fuel consumption of the Hummer H2 is approximately 25 to 30 liters per 100 kilometers. Relevant information is as follows: 1. The Hummer H2 is a heavyweight off-road vehicle. 2. The Hummer H2 is equipped with two types of engines: a 6.2-liter V8 naturally aspirated engine and a 6.0-liter V8 naturally aspirated engine. The 6.2-liter naturally aspirated engine features multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. This engine is paired with a 6-speed automatic transmission. The 6.0-liter naturally aspirated engine also features multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. This engine is paired with a 4-speed automatic transmission. 3. Due to its substantial weight and the use of large-displacement V8 naturally aspirated engines, the Hummer H2 has very high fuel consumption.

19

0

Share

What does 'set' mean on the vehicle display?

What to Do When a Pure Electric Vehicle Runs Out of Battery on the Highway?

Does a New Car Need Antifreeze?

What is the original brand of brake discs for the Audi Q7?

Why Does the Car Jerk When Releasing the Accelerator?

How to Determine When to Replace Brake Pads?

What is the fuel consumption of the Hummer H2?

Are the screws on a car prone to loosening?

How to Solve Incomplete Gasoline Combustion?

What does keyout mean?

Where is the cabin air filter located in the Changan CX20?