What does scanning the line mean in the driving test?

What is the method for replacing the fuel filter element on the City?

The method for replacing the fuel filter element on the City is: 1. Close the inlet valve of the filter, unscrew the end cover bolts, and open the end cover; 2. Open the drain valve to completely drain the dirty oil; 3. Loosen the fastening nut at the top of the filter and remove the old filter element vertically upwards; 4. After replacing the filter, close the drain valve and secure the end cover with bolts. Taking the 2019 City as an example, it belongs to the compact car category with body dimensions of: length 4450mm, width 1695mm, height 1477mm, wheelbase 2600mm, and fuel tank capacity of 40 liters. The 2019 City features a MacPherson strut front suspension and a torsion beam rear suspension.

4

2

Share

What type of gasoline does the Jetta VS5 use?

The Jetta VS5 uses 95-octane gasoline. Taking the 2020 Jetta VS5 as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a trunk capacity of 482 liters. The 2020 Jetta VS5 features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.

4

Share

What transmission does the BMW X3 use?

The BMW X3 uses a transmission provided by ZF. ZF is a globally active technology group that offers mobility system solutions for passenger cars, commercial vehicles, and industrial technology. It is also a major supplier of special transmissions for ships, forklifts, railway locomotives, and helicopters. The BMW X3 is equipped with an 8-speed automatic transmission. This automatic transmission has eight forward gears. Essentially, an automatic transmission is a traditional AT or CVT transmission with the added functionality of manual shifting. The purpose of an automatic transmission is to enhance the driving pleasure of automatic vehicles. When using the BMW X3's transmission in daily driving, the following points should be noted: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Many drivers, aiming to showcase smooth operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding and other malfunctions. Avoid frequently climbing steep slopes in Drive (D). On steep inclines, automatic vehicles can overheat due to high load or may upshift too early, resulting in insufficient power. In such cases, using manual mode to lock in lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Towing with a rope or dragging the vehicle directly should be avoided.

1

4

Share

How to Operate the Cruise Control on a Civic?

The method to use the cruise control on a Civic is as follows: 1. Press the ON/OFF key to activate the system, at which point the cruise control indicator on the dashboard will light up; 2. Accelerate to the desired speed, then press the SET key. At this point, you can release the accelerator with your right foot, and the speed will be set at the current rate; 3. You can fine-tune the speed using the 'RES' and 'SET-' keys; 4. There are three ways to deactivate the cruise control: stepping on the brake, pressing the cancel (CANCEL) key, or pressing the ON/OFF key; 5. If the cruise control is canceled by stepping on the brake or pressing the cancel key, you can press the RES key to resume the previous cruise control speed.

1

4

Share

What is the method for steering the wheel?

The method for steering the wheel is: 1. Control the steering wheel by pushing with the left hand and pulling with the right hand in a smooth and gentle motion; 2. When holding the steering wheel, use your hands to support it to reduce bad driving habits; 3. When turning the steering wheel, apply the principle of 'more turns, more returns; fewer turns, fewer returns; quick turns, quick returns.' The return speed should be fast and accurate. The function of the steering wheel is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft to control the vehicle. The working principle of the steering wheel is: the steering mechanism converts circular motion into linear motion through a rack and pinion, pushing the wheels to rotate via the steering linkage, thereby achieving the vehicle's steering function.

16

3

Share

What are the body dimensions of the BMW X5?

The length, width, and height of the BMW X5 are 4930×2004×1776mm, which are the official data. The length of the BMW X5 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The BMW X5 is available in two powertrain options, equipped with a 2.0T turbocharged engine and a 3.0T turbocharged engine, respectively. The 2.0T turbocharged engine delivers a maximum power of 195kW and a maximum torque of 400Nm, while the 3.0T turbocharged engine produces a maximum power of 250kW and a maximum torque of 450Nm. Both models are paired with an 8-speed automatic transmission. National regulations stipulate certain requirements for vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is intended to provide sufficient lateral clearance for overtaking in adjacent lanes. In other words, the significance of vehicle width data in the national standard is to ensure adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

11

5

Share

What does scanning the line mean in the driving test?

What is the method for replacing the fuel filter element on the City?

What type of gasoline does the Jetta VS5 use?

What transmission does the BMW X3 use?

How to Operate the Cruise Control on a Civic?

What is the method for steering the wheel?

What are the body dimensions of the BMW X5?

How to Set the Tire Pressure Monitoring System in Volkswagen Lavida?

What are the differences between the Trumpchi GS4 and GS5?

What engine does the Ferrari FF use?

What do T and L represent in cars?