What Does Right Tire Pressure Loss Mean?

2 Answers
McAugust
08/31/25 7:45am
When the car displays a warning for pressure loss in the left rear tire, it indicates that the tire pressure in the left rear tire is abnormal and requires calibration. Only vehicles equipped with a tire pressure monitoring system (TPMS) will show this alert. The TPMS can promptly reflect tire conditions, eliminate potential safety hazards, and extend tire lifespan. Tire pressure monitoring involves real-time automatic monitoring of tire pressure while driving, alerting the driver to leaks or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct TPMS: Direct TPMS uses pressure sensors installed in each tire to directly measure tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect TPMS: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect TPMS essentially relies on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both direct and indirect TPMS. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to a full direct system, this hybrid approach reduces costs and overcomes the limitation of indirect systems, which cannot detect low pressure in multiple tires simultaneously. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.
Was this review help?
19
3
Share
VonDaniela
09/13/25 4:05am
I've been in the auto repair industry for over a decade, and a common issue is pressure loss in the right-side tires, meaning the right tire has insufficient air pressure, often caused by punctures from nails or valve leaks. This can cause the car to veer to the left, which is particularly dangerous at high speeds, increasing the risk of losing control or a tire blowout. It's crucial to promptly check the tire pressure with a gauge. If it's below the standard value listed on the door frame, inflate the tire immediately. Remember, temperature drops can also reduce tire pressure, so regular checks are especially important in winter. Don't wait for the warning light to come on before taking action, as this could lead to permanent damage.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How many methods are there for reversing into the garage in Subject 2?

There are two methods for reversing into the garage in Subject 2, namely right-side reversing and left-side reversing. Below are the relevant introductions about reversing into the garage in Subject 2: 1. Project Introduction: Reversing into the garage is the most time-consuming project in Subject 2 and also the one with the highest failure rate among trainees. 2. Common Mistakes: During the exam, trainees who usually perform well in practice may exhibit a polarized state. Some trainees, worried about failing the exam, become overly nervous, causing their usually proficient exam steps to become completely disorganized during the actual test. Another group of trainees, who believe they perform well in practice, may approach the exam too casually, neglecting some details and easily stepping into the "danger zone" of failure. 3. Tips for Passing: Participate in pre-exam mock tests to promptly identify and adjust your shortcomings, ensuring a smooth passage through the exam.
18
4
Share

What does the New Santana 180 refer to?

New Santana 180 refers to the 2015 Volkswagen new model, where 180 is the new badge for Volkswagen cars, with a 1.6L displacement. The 180 at the rear represents a 1.2T engine with a torque of 180N. The 1.6L refers to a 1.6L naturally aspirated engine without turbocharging. Additional information: Below is an introduction to the all-new Santana: 1. Exterior design: The vehicle features smooth and neat streamlined contours with a simple yet enduring design style. The adoption of a family-oriented design ensures a more reliable way to meet user needs and maintain a unified style. 2. Interior design: The traditional T-shaped layout is quite common among many Volkswagen brand models, with the steering wheel, instrument panel, door panels, and seat designs all significantly improved over the previous generation. 3. Powertrain: The entire lineup has been updated to the latest EA211 series, which utilizes technologies such as an aluminum cylinder block and modular cylinder head cover, making the engine lighter in weight. The all-new Santana offers two displacement options: 1.4L and 1.6L. The 1.4L engine delivers a maximum output power of 90 horsepower (66kW) with a peak torque of 132N·m, while the 1.6L engine achieves a maximum power of 110 horsepower (81kW) and a peak torque of 155N·m.
16
0
Share

Where is the reversing camera module located in the Range Rover Evoque?

The reversing camera module in the Range Rover Evoque is located on the left side of the trunk. Below is relevant information about the reversing camera: 1. Definition: The reversing camera, also known as a parking assist system, reverse visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. This system provides a clear and intuitive view of the rear situation when reversing, making it one of the most practical configurations for reversing safety. 2. Technology used: Professional vehicle-mounted probes feature enhanced anti-magnetic, anti-shock, waterproof, and dustproof performance. The vehicle-mounted display uses TFT true color with anti-magnetic treatment to eliminate signal interference and flickering. It can simultaneously receive two video signals and play VCDs and DVDs without a decoder. Additionally, it features automatic horizontal switching and automatic on/off functions for the reversing visual system.
8
2
Share

What are the consequences of selling a car as scrap metal without scrapping it

If a vehicle is sold as scrap metal without being properly scrapped, the vehicle owner will be unable to register or license other motor vehicles under their name. Below are relevant details about vehicle scrapping: 1. Impact on vehicle registration: If a car is not scrapped according to regulations, its information will remain in the database. Before deregistering this vehicle's information, the owner cannot register or license other motor vehicles under their name. 2. Impact on driver's license renewal/replacement: Since driver license services and vehicle services are both managed by traffic authorities, failure to deregister scrapped vehicles as required will also affect procedures like driver's license renewal or replacement. 3. Fines: According to the 'Regulations on the Recycling of Scrapped Automobiles', selling, gifting, or otherwise transferring scrapped vehicles to non-authorized recycling entities or individuals will result in confiscation of illegal gains by public security authorities, along with fines ranging from 2,000 to 20,000 yuan.
7
5
Share

Where are the six braking points in Subject 3?

Subject 3 has six braking points as follows: 1. Driving straight through an intersection: Due to the complex situation at intersections, there may be vehicles or pedestrians passing. Students should apply the brakes in advance to slow down when preparing to pass through an intersection, and the speed should not exceed 30km/h. Even if the traffic light is green with no vehicles or pedestrians obstructing, a light brake must still be applied. Otherwise, the safety officer will directly fail the student. 2. Bus stops: Generally, there will be voice prompts. If there are no voice prompts, pay attention to the roadside signs. When passing, apply the brakes and pass slowly. 3. Crosswalks: Students must apply the brakes to slow down when passing through a crosswalk. If there are pedestrians crossing, they must stop and wait, ensuring not to stop the vehicle on the crosswalk. Avoid uncivilized behaviors such as rushing or honking, which will result in immediate failure. 4. School zones: The principle is the same as for bus stops. The speed should be below 30km/h, and when passing, brakes must be applied to slow down. If encountering situations like students crossing the road after school, stop and wait. 5. Left and right turns: Whether turning left or right, turn signals must be activated in advance, then slow down and pass. 6. U-turns: When making a U-turn, always slow down, and if necessary, shift to a lower gear (1st or 2nd). Without deceleration, turning the vehicle too quickly will result in poor smoothness and make the safety officer very uncomfortable.
2
4
Share

Is Lemfoerder a Genuine Volkswagen Part?

Lemfoerder is a genuine Volkswagen part. Below is relevant information about Volkswagen: 1. Production Process: Double-sided galvanized steel sheets, advanced cavity wax injection technology, combined with sophisticated car painting processes and automated spraying equipment, ensure years of corrosion resistance for the vehicle body. Precision water honing technology, automated production lines, and cold testing techniques for assembly lines guarantee excellent engine performance. 2. Configuration: The transmission is a 7-speed dual-clutch, and the body type is a 4-door, 5-seater sedan. The vehicle's dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.