What does right-hand drive car mean?

2 Answers
AdelineMarie
07/29/25 3:55pm
New car tire rust is normal. Here is relevant knowledge about tire rust: Causes of tire rust: The reason for rust on the sidewalls of tires is that brake pads contain iron, which wears down and produces powder during braking. When exposed to water, rusty water flows to the tire side, causing rust over time. The yellow rust on the outer side of tires may result from the oxidation of new car tire wax in high-temperature environments; vehicles frequently driven in dusty areas may show these yellowing phenomena, which are normal and not indicative of tire quality issues. Methods to deal with tire rust: To remove rust, use a tire brush and cleaner to thoroughly clean the sidewalls of the wheel tires from all directions, wiping away yellow stains. Then dry with a lint-free soft cloth and finally apply tire vulcanizing agent. When parking, the vehicle should be parked in a cool, flat area away from various chemicals to prevent tire yellowing.
Was this review help?
16
1
Share
MacAlice
08/15/25 3:52am
Right-hand drive (RHD) vehicles refer to cars with the steering wheel positioned on the right side, primarily used in countries like the UK, Japan, and Australia where traffic rules mandate driving on the left. My first experience driving such a car was during a trip to Japan when I rented one. Sitting inside felt extremely awkward at first—the steering wheel was on the right, gear shifting required left-hand operation, and I instinctively veered to the right when turning initially, nearly hitting the roadside guardrail. After driving it a few more times, I gradually adapted and realized this design offers better visibility for pedestrians crossing from the left, especially in dense urban areas. However, overtaking proved challenging due to the right-biased driving position, making it harder to judge oncoming traffic. I had to frequently check the rearview mirror to ensure safety. Overall, it takes a few days to get used to driving an RHD vehicle, and beginners are prone to accidents without proper adaptation. I recommend familiarizing yourself with local traffic rules and road signs before driving one abroad, and practicing parking angles to avoid scratches.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What is the method for resetting a car's ECU by disconnecting the power?

Car ECU power disconnection reset method is: 1. Disconnect the positive terminal of the car battery, at which point the vehicle will lose power; 2. After 5 to 10 minutes of power disconnection, the information in the ECU will be reset. The ECU is referred to as the brain of the engine, with many sensors and actuators around the engine. The ECU can collect data from various sensors, process it, and then control the engine's operation through the actuators. The ECU is a computer board, fixed within the engine compartment, and can be found after opening the engine hood. The ECU's casing is metal with certain waterproof capabilities, and there are some heat sinks on this metal casing to help dissipate heat from the ECU.
14
1
Share

What is the function of a rearview blind spot mirror?

Introduction to the function of a rearview blind spot mirror: 1. Reduce blind spots. During daily driving, due to the presence of certain blind spots in the driver's line of sight, it is often difficult to notice some overtaking situations, leading to unnecessary accidents. Installing a small convex mirror on the rearview mirror can eliminate the blind spot on the right rear side of the vehicle. 2. Make reversing more convenient. During daily driving, drivers usually cannot see the condition of the side of the vehicle body and the rear wheels. With the installation of a small convex mirror, the driver's viewing angle is expanded, making it easier to see the position of the rear wheels when reversing. For beginners, parking becomes much simpler. 3. Prevent scratches. A wider field of vision naturally allows the driver to see more objects, thus avoiding incidents where the vehicle body gets scratched.
19
4
Share

What are the reasons for no response when starting an old Mazda 6?

No response when starting can be caused by various issues, mostly related to the fuel system or electrical circuit. First, check if there is insufficient fuel. Without the power source "gasoline," the car naturally won't start. If the issue is due to lack of fuel, depending on the situation, you can seek help from nearby car owners, borrow fuel, or arrange for towing to a gas station as emergency measures. Below are other reasons why a car might not start. 1. Incorrect gear selection can also prevent the car from starting. Normally, the correct gears for starting an automatic transmission car are P (Park) or N (Neutral). If the driver accidentally leaves the gear in R (Reverse) or another position, not only will the car fail to start, but it may also pose a safety hazard. 2. If the issue is electrical, the failure to start can occur suddenly. Common electrical faults that prevent starting include: blown fuses, open circuits in the high-voltage coil, open circuits in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs.
19
0
Share

Reasons for Frequent Coolant Loss in the Expansion Tank Without Overheating

The reasons for frequent coolant loss in the expansion tank without overheating are: 1. There is a leak in the cooling system; 2. The coolant temperature may be too high; 3. The water pump is seized; 4. The cylinder head gasket is blown. The functions of the radiator are: 1. To improve the cooling efficiency of the coolant; 2. To prevent the engine from overheating. Precautions when using the radiator: 1. Prevent the car radiator from overheating; 2. Replace the coolant regularly; 3. Do not use tap water as a substitute for coolant; 4. Choose high-quality diluted water when selecting radiator fluid or antifreeze; 5. Perform regular anti-rust treatment for the radiator; 6. Address radiator issues promptly to avoid further damage from continued use.
3
2
Share

Is the first oil change free?

First maintenance is free. The time limit for the first maintenance: When the new car reaches the first maintenance mileage specified in the "Maintenance Manual" provided with the vehicle, usually at 2000 kilometers, the first maintenance must be performed. Moreover, the first maintenance must be carried out at an authorized service station, where the service station will perform the first maintenance for the customer free of charge. This is also one of the necessary conditions for the user to obtain the quality guarantee. The following points should be noted in terms of vehicle maintenance: 1. Replace the three filters and engine oil; 2. Check whether the brake fluid, transmission oil, and power steering fluid should be replaced; 3. Inspect the brake pads, tires, shock absorbers, and suspension; 4. Check the spark plugs, throttle valve, and fuel supply system; 5. Rotate the front and rear wheels and perform routine inspections (lights, battery, etc.).
2
3
Share

Does the Accord 260 Elite Edition have CarPlay?

The Accord 260 Elite Edition is equipped with CarPlay. Taking the 2021 tenth-generation Accord as an example, it is a mid-size car with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, a wheelbase of 2830mm, a minimum ground clearance of 150mm, and a curb weight of 1495kg. The 2021 tenth-generation Accord features a MacPherson strut front suspension and a multi-link independent rear suspension. It is powered by a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194PS, a maximum torque of 260Nm, and a maximum power output of 143kW, paired with a continuously variable transmission (CVT).
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.