What does REGEN mean in a car?

Should Windshield Washer Fluid Be Drained in Winter?

Whether the windshield washer fluid needs to be drained in winter depends on whether the fluid in the reservoir is of the antifreeze type. If summer windshield washer fluid was previously added, meaning its freezing point does not meet the required standards, it must be drained and replaced with antifreeze windshield washer fluid. Otherwise, there is a risk of the fluid freezing, which could damage the reservoir or the washer pump. Choosing Windshield Washer Fluid: When selecting windshield washer fluid, antifreeze performance should be the primary criterion. Choose a fluid with a freezing point at least 10 degrees below the local minimum temperature to prevent issues like frozen fluid or pump failure. Function of Windshield Washer Fluid: Leaving the reservoir empty in winter without adding fluid is not advisable, as windshield washer fluid is a consumable necessity for driving, playing a crucial role. It offers functions such as cleaning, antifreeze protection, antistatic properties, and corrosion prevention. It also helps quickly melt snow and ice, prevents fogging and glare, significantly contributing to driving safety. When the windshield becomes blurry, spraying some windshield washer fluid can help clean it, making the view clearer.

9

4

Share

What is the fuel consumption of the Geely Panda?

Geely Panda's official fuel consumption is 5.1 liters per 100 kilometers. Clean engine carbon deposits: It is recommended to add a certain amount of cleaning agent when refueling. After cleaning, it is best to drive on the highway for a while, which helps increase exhaust volume and allows stronger airflow to remove larger carbon deposit particles. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they will become dirty and affect performance, sending incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits.

10

4

Share

How to set the mirror folding function after locking the Audi A6L?

Rotate the mirror adjustment knob of the A6L to the folding position, and both exterior mirrors will be folded. The mirror heating function of the Audi A6 can assist the driver in observing the road conditions at the rear of the vehicle while driving. If the mirrors become blurred or unclear, it may affect driving safety. The mirror heating feature is particularly useful on rainy days, as it heats the electric mirrors (the reflective mirrors on both sides of the windows). If the exterior mirrors are accidentally bumped or manually moved out of position, they can be restored by performing an electric folding and extending operation. First, press the vehicle's one-touch start button to start the engine. Then, press the instrument menu button on the left side of the multifunction steering wheel. Next, press the VIEW button on the left side of the steering wheel to switch the vehicle's instrument display. Then, select the "Fold Mirrors" option on the central control LCD screen to enable automatic mirror folding when locking the vehicle. Finally, press the confirmation button on the left side of the steering wheel to complete the setup.

13

0

Share

Where is the Lynk & Co 03 engine produced?

Lynk & Co engines are domestically produced. The 1.5T model's engine, with model numbers JLH-3G15TD and JLH-3G15TDC, comes from Geely's engine division, while the 2.0T model's engine is sourced from Volvo. Additional information about Lynk & Co is as follows: 1. In terms of the rear design, the Lynk & Co 03 features 'L'-shaped taillights and dual round exhaust pipes similar to the concept car, giving it high recognition. 2. For powertrain, the Lynk & Co 03 is equipped with a 1.5T direct-injection engine paired with a 7-speed dual-clutch transmission. It delivers a maximum power of 132kW (179 horsepower) and a peak torque of 265N·m, mated to a 7-speed dual-clutch transmission. 3. In terms of exterior design, the production version of the Lynk & Co 03 adopts split-type headlights and a horizontal grille. The car's body design continues the concept car's styling, particularly the slightly fastback C-pillar design.

4

Share

What is the ground clearance of the Volkswagen CC?

The ground clearance of the Volkswagen CC is 180mm when unloaded, with a minimum ground clearance of 120mm. Additional extended information is as follows: Suspension: The Volkswagen CC's chassis structure still features a front MacPherson strut independent suspension and a rear multi-link independent suspension, consistent with the Tiguan L, with overall tuning leaning towards comfort. The suspension has a long travel and good flexibility, providing a relatively crisp rebound when passing over bumpy roads and maintaining good stability when facing larger undulating surfaces. Effective suppression of roll: During high-speed cornering, the suspension support is also adequate, effectively suppressing roll. The lower control arm of the Volkswagen CC's MacPherson front suspension uses a steel plate stamping process, which reduces manufacturing costs while ensuring load-bearing performance. The front suspension bearing seat is made of aluminum alloy: Compared to cast iron, it performs better in terms of weight reduction, lowering the unsprung mass of the front suspension and improving response performance. The Kodiaq's front suspension structure and manufacturing process are consistent with the Tiguan L of the same size and platform, with a high degree of commonality between the front suspension components of the two models.

1

0

Share

What are the model specifications of gear oil?

Gear oil model specifications: 1. GL-1: GL-1 grade gear oil is specified for automotive spiral bevel gears, worm-type drive axles, and various manual transmissions operating under low tooth surface pressure and low sliding speed conditions. 2. GL-2: For automotive worm-type drive axles where GL-1 gear oil cannot meet requirements due to load, temperature, and sliding speed conditions, GL-2 grade gear oil is specified. 3. GL-3: GL-3 grade oil is specified for automotive manual transmissions and spiral bevel gear drive axles with relatively harsh sliding speeds and loads. 4. GL-4: GL-4 grade gear oil is specified for various gears operating under low-speed high-torque and high-speed low-torque conditions, especially hypoid gears used in buses and other vehicles. 5. GL-5: GL-5 grade gear oil is specified for various gears operating under high-speed shock loads, high-speed low-torque, and low-speed conditions, particularly hypoid gears used in buses and other vehicles. 6. GL-6: GL-6 grade gear oil is specified for various gears in cars and other vehicles operating under high-speed shock conditions, especially hypoid gears with large offset distances (greater than 50nm or close to 25% of the large gear diameter).

11

2

Share

What does REGEN mean in a car?

Should Windshield Washer Fluid Be Drained in Winter?

What is the fuel consumption of the Geely Panda?

How to set the mirror folding function after locking the Audi A6L?

Where is the Lynk & Co 03 engine produced?

What is the ground clearance of the Volkswagen CC?

What are the model specifications of gear oil?

Why is the Nissan GTR called the Godzilla?

What is the fuel consumption of the F0?

Can the Steering Wheel Control the Rear Wheels?

What to Do When the Vehicle Diesel Heater Blows Cold Air?