What does 'Refer to the owner's manual for coolant refill' mean?

1 Answers
EmeryFitz
07/30/25 3:34am
Refer to the owner's manual for coolant refill is a reminder to the vehicle owner that coolant needs to be refilled. The following is an introduction about coolant: 1. Introduction to coolant: Coolant, the full name should be antifreeze coolant. It means coolant with antifreeze function. 2. Coolant can prevent the coolant from freezing and cracking the radiator and freezing the engine cylinder block during parking in cold seasons. 2. Functions of coolant: (1) Winter antifreeze: Prevents the coolant from freezing and causing the radiator and engine block to crack after the car is parked in winter. (2) Anti-corrosion: Prevents corrosion in the cooling system. (3) Anti-scaling: Reduces the formation of scale to avoid clogging the circulation pipes and affecting the heat dissipation function of the cooling system. (4) Anti-boiling: Meets the heat dissipation and cooling needs of high-load engines.
Was this review help?
3
1
Share
More Forum Discussions

What is the fuel tank capacity of the BMW e46?

The fuel tank capacity of the BMW e46 is 60 liters. Methods to check the fuel tank capacity of a car: Check through the owner's manual. The car manual can be considered a comprehensive guide, containing detailed information about the vehicle, from maintenance cycles to the fuel tank capacity. Owners can refuel based on this capacity, and it is advisable not to exceed the safe capacity. Fuel tank capacity measurement units: Internationally, the standard unit for measuring car fuel tank capacity is liters (L). Different countries also have corresponding standards for fuel tank capacity. In China, the regulation stipulates that the fuel tank capacity should be 95% of the rated value, but in practice, the actual capacity is usually greater than the nominal capacity.
20
1
Share

What Do Oil Parameters Mean?

Oil parameters refer to the temperature performance of engine oil, also known as engine lubricating oil. Its functions include: 1. Lubrication and friction reduction; 2. Assisting in cooling and temperature reduction; 3. Sealing and leak prevention; 4. Rust and corrosion prevention; 5. Shock absorption and buffering. Engine oil consists of base oil and additives. Base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of base oil performance. It can be categorized into diesel engine oil and gasoline engine oil. Engine oil is classified by viscosity index into: 1. Low viscosity index; 2. Medium viscosity index; 3. High viscosity index; 4. Very high viscosity index; 5. Ultra-high viscosity index.
11
1
Share

What does the vehicle warranty period include?

Vehicle warranty period includes: replacement of air filter, oil filter, spark plugs, brake linings, and clutch plates. The vehicle warranty period refers to the time period during which the car manufacturer promises to provide free repairs and maintenance for faults caused by quality issues when selling the product to consumers. The warranty period for cars is usually 3 years or 60,000 kilometers, whichever comes first. Once either condition is met, it indicates that the car's warranty period has expired. After the warranty period, the owner is responsible for all expenses. Additionally, if the vehicle is not maintained according to regulations, or if damage is caused by unauthorized modifications or improper use, it will not be covered by free warranty even during the warranty period.
1
2
Share

What Causes the Tire Pressure Indicator Light to Illuminate?

The reasons for the tire pressure indicator light to illuminate are: 1. The tire pressure is not within the normal range; 2. Air leakage or punctures causing insufficient tire pressure; 3. Excessive tire pressure. Tire pressure refers to the air pressure inside the tire. The effects of excessive tire pressure include: 1. Increased friction between the tire and the ground, reducing tire adhesion; 2. Affecting the vehicle's braking performance and driving comfort; 3. Accelerating wear on the central tread pattern, reducing tire lifespan. The effects of insufficient tire pressure include: 1. Increased contact area between the tire and the ground, leading to easier tire overheating; 2. Expansion of the tire body, making it prone to cracks on both inner and outer sides; 3. Accelerated rubber aging and faster tire wear.
2
5
Share

How to reset the maintenance indicator light on FAW Besturn X40?

The method to reset the maintenance indicator light on FAW Besturn X40 is: 1. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 2. Release both arrow buttons after approximately 3 seconds; 3. Press and hold the SET button for more than 3 seconds, then press the MODE button; 4. Turn off the ignition switch to complete the process. Taking the 2019 FAW Besturn X40 as an example, its body dimensions are: length 4310mm, width 1780mm, height 1680mm, with a wheelbase of 2600mm. The 2019 FAW Besturn X40 is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 84kW and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
14
0
Share

What is the relationship between Mercedes-Benz and Maybach?

Maybach is a brand under Mercedes-Benz. Taking the Maybach S-Class 2020 model as an example, its body dimensions are: length 5466mm, width 1899mm, height 1500mm, wheelbase 3365mm, fuel tank capacity 70l, and the body structure is a 4-door 5-seater sedan. The Maybach S-Class 2020 is equipped with a 3.0t twin-turbocharged engine, with a maximum power of 270kw and a maximum torque of 500nm, matched with a 9-speed automatic transmission. It adopts double-wishbone independent suspension for both front and rear suspension, and the body structure is a unibody.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.