What does 'rear' refer to in a car?

1 Answers
StChase
07/30/25 5:45am
The 'Rear' button in a car is the rear windshield defogger switch. Pressing it can remove fog from the rear windshield, and some 'rear' buttons also have the function of heating the rearview mirrors. Nowadays, many car models omit the English word 'rear' and simply use a square frame with an upward wavy line icon. The reasons for car window fogging: Due to the temperature difference between the inside and outside of the car, the windows are prone to fogging. The temperature of the window glass in contact with the outside is lower, causing the water vapor inside the car to condense on the glass, forming fog. When the window temperature is below the dew point, and the air humidity is constant, if the window temperature is below the dew point, condensation easily forms on the surface of the window, leading to fogging on the front windshield. If there is a certain temperature difference between the two sides of the window, the side with the lower temperature will have a surface water saturation vapor pressure lower than the surrounding environment's vapor pressure, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in fog. Defogging principle: Copper wires are embedded in the rear windshield. When there is moisture or fog on the rear windshield, an electric current is used to heat some of the copper wires. The heated windshield then dispels the fog. According to current car rear windshield defogging designs, the heating function automatically turns off after about 10 minutes to protect the heating wires. The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the car. The car air conditioning controller is a control device for the car air conditioning equipment. It regulates the car air conditioning system, providing cooling, ventilation, and defrosting functions. All equipment is securely installed, with control devices and operating mechanisms that are flexible to use, easy to operate, and perform safely and reliably.
Was this review help?
1
3
Share
More Forum Discussions

Do Front and Rear Brake Pads Need to Be Replaced Together?

Front and rear brake pads do not need to be replaced together; replacement should be based on the thickness of the brake pads. The method for replacing car brake pads is as follows: 1. Lift the car and remove the tire; 2. Unscrew the fixing screws on the brake caliper and remove the brake caliper; 3. Remove the old brake pads and push back the brake caliper piston; 4. Clean the brake disc mounting bracket and install the new brake pads. Car brake pads, also known as car brake linings, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheel. Methods to determine whether brake pads need replacement include: 1. Observe if the brake pad thickness is only one-third of the original; 2. Check for abnormal noises when lightly braking; 3. Notice if the brake response is delayed and the braking force weakens.
16
0
Share

How to Control the Vehicle Steering Wheel?

Control the vehicle steering wheel by following these steps: 1. Keep your body upright against the seat, adjusting the seat height to a comfortable position; 2. Look straight ahead, gently holding the left side of the steering wheel with your left hand and the right side with your right hand, with arms relaxed and naturally hanging down; 3. Ensure balanced hand movements to avoid unnecessary shaking. The steering wheel is a wheel-shaped device for controlling the direction of travel, converting the force applied by the driver on the wheel's edge into torque transmitted to the steering shaft. Common faults include: 1. Steering wheel lock, where the wheel automatically locks after the engine is turned off as an anti-theft feature; 2. Scratched steering wheel; 3. Steering wheel vibration, caused by tire deformation or vehicle transmission system issues.
12
2
Share

How much fuel does a 450-horsepower engine consume at idle for one hour?

Generally, a household car consumes around 2 liters, but the specific amount depends on the engine displacement and idle speed. The larger the displacement, the higher the fuel consumption at idle. For a 1.6-liter engine at around 800 RPM, the consumption is approximately 0.8L per hour. Idle speed generally refers to the engine running without doing any work—the car remains stationary, but the engine continues to burn fuel. Below is additional information: Consequences of carbon buildup: Carbon buildup can cause incomplete combustion of gasoline, leading to engine shaking. Engine carbon buildup has a significant impact on the car. First, it reduces engine power, meaning uneven and gradually diminishing power output—in other words, the engine becomes weaker over time. Second, it increases fuel consumption, adding to the financial burden.
19
4
Share

Is the Boyue's Dual Clutch Wet or Dry?

The Boyue's dual clutch is dry. The dual clutch is located between the engine and the transmission, serving as the switch for power transmission between the engine and the transmission. It is a transmission mechanism that can both transmit and cut off power. The Boyue's body dimensions are: length 4519 mm, width 1831 mm, height 1694 mm, with a wheelbase of 2670 mm and a fuel tank capacity of 58 liters. The Boyue is equipped with a 1.8T turbocharged engine, with a maximum power of 120 kW and a maximum torque of 250 Nm, paired with a 6-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
19
1
Share

How to Replace the Wiper Blade on a Beam Wiper?

The method to replace the wiper blade on a beam wiper is: 1. Lift the wiper and remove it from the metal arm; 2. Pry up the metal hook, pull out the old wiper blade, and pry open one side of the plastic end cap on the wiper; 3. Install the new blade, cover it with the plastic end cap, and clamp the metal hook tightly to secure it in place. The function of the beam wiper is to clear rain, snow, and dust from the windshield that obstructs the view. The technical name for the beam wiper is 'wiper blade,' which is a blade structure installed in front of the windshield, composed of an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly.
5
0
Share

How to Remove the Battery of a Ford Focus?

Ford Focus battery removal method is: 1. With the engine off, use a 10cm socket wrench to sequentially remove the screws of the battery's upper fixing clamp; 2. Loosen the cable bolt on the negative terminal and remove the cable connector; 3. Loosen the cable bolt on the positive terminal and remove the cable connector; 4. Loosen the cable bolts on both positive and negative terminals, remove the battery fixing bracket, and take out the battery. The Ford Focus has body dimensions of: length 4647mm, width 1810mm, height 1468mm, with a wheelbase of 2705mm. It is equipped with a 1.5L naturally aspirated engine, delivering maximum power of 90kW and maximum torque of 153Nm, paired with a 6-speed manual transmission.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.