What does Raptor aux1234 mean?

1 Answers
GabriellaLee
07/30/25 4:06am
AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio in electronic products can be connected to the car audio through the headphone jack and AUX interface, allowing the audio to be played on the car audio broadcasting facilities. The USB interface can be used to insert a USB drive to play audio. When using it, insert one end into the AUX interface and connect the other end to a mobile phone, MP3, MP4, or other video players. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music discs. However, if the playback device runs out of power, the music will also stop (the interface is generally a 3.5mm labeled headphone jack). Aux is the abbreviation for Auxiliary, which refers to an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. When there is a special application, such as requiring additional audio output or input, these terminals can be used. These backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, or connecting with a MODEM via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because their respective applicable configuration environments differ. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are usually impossible in user mode, such as initialization, restoring default configurations, or correcting abnormal user modes. It provides a fixed port for the device, which can be used as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup functions for hardware products can be achieved. Note: When using the AUX interface, ensure you purchase the correct connecting cable and avoid plugging the audio cable into the wrong port. It is best to follow the steps outlined in the product's user manual. If you are still unsure, consult the product's official website or call for assistance.
Was this review help?
1
3
Share
More Forum Discussions

How to Replace the Battery in a Roewe Key?

Method to replace the battery in a Roewe key: 1. There is a silver button on the top of the key; press it to pop out the mechanical key. 2. After popping out the key, you can see a clasp on the side; use a flat screwdriver to pry it open. 3. Once a gap appears, pull open the key cover, remove the old battery, replace it with a new one, and then close the cover. Roewe is an automobile brand under SAIC Motor Corporation Limited. Among its models, the Roewe 350 is the first (A-class) compact sedan jointly developed by SAIC Motor and Nanjing Automobile, and it is also the first Roewe family sedan equipped with the 3G intelligent driving system inkaNet.
8
2
Share

What is the fuel consumption of the Magotan 2.0?

The fuel consumption of the Magotan 2.0T is 8.8 liters per 100 kilometers. Below is additional information about the Magotan 2.0T: 1. The Magotan 1.4-liter turbocharged engine delivers 150 horsepower and a maximum torque of 250 Nm. The engine reaches its maximum power output at 5000 to 6000 rpm and its maximum torque at 1750 to 3000 rpm. It is paired with a 7-speed dual-clutch transmission. 2. The low-power version of the 2.0-liter turbocharged engine produces 186 horsepower and a maximum torque of 320 Nm. The engine achieves its maximum power output at 5000 rpm and its maximum torque at 1600 to 4000 rpm. It is also paired with a 7-speed dual-clutch transmission.
14
3
Share

Do Cars Need to Warm Up in Winter?

Winter cars need to warm up, the main reason is: after the car has been parked for a long time, the engine oil flows back to the oil pan at the bottom of the engine. After the car is started, the upper part of the engine is in a state without oil and lacks lubrication. It takes about 30 seconds after starting for the oil pump to operate and deliver oil to the engine components that need lubrication, such as pistons, connecting rods, and crankshafts. The correct way to warm up the car: the engine speed should not exceed 3000 to 3500 revolutions per minute, maintain 2000 revolutions, and wait for the engine temperature to rise to the normal operating temperature (which takes 3 to 5 minutes), then you can resume normal driving.
14
2
Share

What is the fuel consumption of the 1.5L New Jetta?

1.5L New Jetta has an official fuel consumption of 5.9L per 100km, while the actual fuel consumption is 7.4L. Here are more details about the New Jetta: 1. Body dimensions: The New Jetta measures 4487mm in length, 1706mm in width, and 1470mm in height, with a wheelbase of 2603mm. 2. Powertrain: The New Jetta is equipped with 1.4L and 1.6L engines, with maximum power outputs of 90 horsepower and 110 horsepower respectively. The engine features dual variable valve timing technology, with a compression ratio increased to 11:1. The transmission options include a 5-speed manual or 6-speed automatic transmission.
14
2
Share

Is Peeling License Plate Eligible for Free Replacement?

Peeling license plates are not eligible for free replacement unless caused by human factors. Below is relevant information about license plates: Functions of License Plates: License plates serve as identification numbers and information registration for vehicles. Their primary purpose is to indicate the vehicle's registered region through the plate number, and to trace the vehicle owner and registration details based on the plate. License Plate Authority Codes: The first character of a license plate is a Chinese character, while the second is an English letter. When assigning letter codes for prefecture-level administrative divisions, the letters I and O are skipped. The letter O is typically reserved for police vehicles or government agencies (though this does not apply to the letter O used in military or armed police plates).
1
3
Share

What engine does the Maybach 57 use?

The Maybach 57 is equipped with a 5.5-liter V12 twin-turbocharged engine. The latest car under the Maybach brand is the Maybach S-Class, which is larger, more expensive, and more luxurious than the standard Mercedes-Benz S-Class. Here are some extended details about the Maybach 57: 1. The Maybach 57's engine delivers 551 horsepower and a maximum torque of 900 Nm. 2. The engine outputs maximum power at 5250 rpm and maximum torque between 2200 and 3000 rpm. 3. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 4. This engine is paired with a 5-speed automatic transmission. 5. The Maybach 57 uses active air suspension for both the front and rear suspension.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.