What does Prado TX mean?

What engine does the Haval F5 use?

Haval F5's engine is independently developed by Great Wall Motors and belongs to a domestically produced engine. The engine model of Haval F5 is GW4B15. The 1.5T high-power version has a maximum power of 124KW, a maximum torque of 285Nm, and a maximum horsepower of 169. The 1.5T low-power version has a maximum power of 110KW, a maximum torque of 210Nm, and a maximum horsepower of 150. For daily maintenance of Haval F5's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication parts, accelerating engine wear and internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder wall, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

13

4

Share

Reasons for Spring Noise When Turning the Steering Wheel?

Reasons for noise when turning the steering wheel include: 1. Friction between plastic components: Most steering wheel accessories are made of plastic. At lower temperatures, plastic hardens, and friction between components can cause noise, which is normal. 2. Issues with the steering wheel clock spring: In this case, the noise usually comes from inside the steering wheel. Applying some grease to the clock spring may help. If the noise persists, the clock spring may need replacement. 3. Loose or damaged stabilizer bar: Noise can also occur on rough roads. Adding shims to the stabilizer bar might solve the issue. If not, the stabilizer bar may need replacement. 4. Problems with the shock absorber top mount: If the shock absorber top mount lacks lubrication, it can also cause noise. Open the hood to locate the noise source. If it comes from the shock absorber top mount, the component may need replacement.

2

1

Share

How much weight can a sedan's trunk hold?

There is no clear standard for the load capacity of a sedan's trunk. Generally, as long as the total weight of the loaded items plus the car does not exceed the gross vehicle weight, it is acceptable. However, it is recommended not to exceed 300 pounds. If the trunk is heavily loaded, it can affect the chassis and suspension system, and the car's fuel consumption and driving safety may also be compromised. Items that should not be placed in the trunk: Flammable and explosive items: Flammable and explosive items must not be stored in the car trunk, especially during high temperatures, as they can easily explode. This is particularly important for drivers who enjoy road trips. Items such as lighters, outdoor gas stoves, and hairspray should not be kept in the trunk to ensure driving safety. Heavy miscellaneous items: When going on a road trip or driving back home, many car owners tend to store a lot of miscellaneous items in the trunk. However, overloading the trunk can strain the car's suspension system, significantly increase fuel consumption, and may even cause the trunk to pop open. It is advisable to manage the trunk space reasonably. Fruits and perishable food: These items are prone to spoilage. If forgotten in the trunk, they can rot and negatively impact the comfort of the ride.

18

2

Share

What is the maximum tonnage of trucks that a B1 driver's license can operate?

B1 driver's license can operate trucks with a total mass of 4.5 tons and an approved load capacity of 1.5 tons. The relevant details are as follows: 1. Driving condition restrictions: The permitted vehicle types for B1 do not include those for B2. A B1 license only allows driving light and mini trucks with a total length not exceeding 6 meters, a total mass below 4500kg (including 4500kg), and an approved load capacity below 1500KG. 2. Permitted vehicles include: The B1 driver's license covers vehicle types permitted by C1, C2, C3, C4, and M licenses. The permitted vehicle types include medium-sized buses (including urban buses with a capacity of 10 to 19 passengers), small and mini passenger vehicles (with a capacity of 9 passengers or fewer), low-speed trucks, three-wheeled vehicles, wheeled self-propelled machinery, and light, small, and mini special-purpose vehicles. 3. Conditions for upgrading: To upgrade to a B1 license, the applicant must have held a C1 license for more than three years, be aged between 21 and 25, and have no record of a full score (12 points) in the current scoring cycle and the most recent scoring cycle before application. Only then can they apply for an upgrade at the vehicle management office in their registered residence.

1

5

Share

What brand is the transmission of the Classic Sylphy?

The manufacturer of the Nissan Sylphy's transmission is Jatco. Jatco is the world's third-largest design and production group of automatic transmissions, with Nissan being its representative brand. Initially, Jatco was just a division within Nissan dedicated to producing transmissions, but it later became an independent company. The Nissan Sylphy comes in both manual and automatic transmission versions. The manual version is equipped with a manual transmission, while the automatic version features a CVT (Continuously Variable Transmission). The CVT does not have specific gear positions; its operation is similar to an automatic transmission, but the ratio changes continuously rather than in steps, ensuring smooth and uninterrupted power delivery. For the Classic Sylphy's transmission, the following points should be noted during daily use: Do not delay changing the transmission oil for too long. Prolonged intervals between oil changes can damage internal components such as bearings and the transmission housing. Avoid coasting in neutral for extended periods. While some experienced drivers may coast in neutral with manual transmissions, doing so with an automatic transmission can cause overheating. Additionally, shifting back into Drive (D) from neutral can create unnecessary stress on the transmission. Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers attempt to shift into reverse while the car is still moving to showcase smooth operation, but this can severely damage the transmission gears, leading to issues like gear grinding over time. Avoid frequently climbing steep slopes in Drive (D) mode. Automatic transmission vehicles may overheat under heavy load or shift prematurely, resulting in insufficient power for climbing. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Using a tow rope or dragging the vehicle directly can cause significant damage.

3

2

Share

What Are the Common Faults of Sedans?

Common faults of sedans include engine failure to start, vehicle stalling when shifting gears, and steering wheel shaking while driving. If any of these faults occur, it is recommended that the owner promptly visit a 4S shop for troubleshooting and vehicle repair. Engine failure to start: Mainly check components such as the distributor, spark plugs, and high-voltage lines for moisture due to car exposure to rain or washing. Also, check whether the battery voltage is sufficient. The solution is to first turn off the vehicle, dry the damp parts, and then start the car; use connecting cables to temporarily connect to another vehicle's battery for power supply to start the vehicle. Vehicle stalling when shifting gears: The main reasons are low engine idle speed; the idle shut-off valve is not tightened, or the plug is loose. The solution is to adjust the gear to the correct idle speed according to the vehicle's condition; if the idle shut-off valve or the connecting plug is loose, simply reinsert it. Steering wheel shaking while driving: The main reasons are mud, stones, or other debris stuck on the vehicle's tires; tire deformation due to impact or loss of wheel balance weights; failure to perform a four-wheel alignment after tire replacement. The solution is to remove stones from the tire treads and debris stuck on the wheels. To avoid safety hazards, deformed tires should be replaced promptly, and balance weights should be installed at the nearest auto repair shop. A professional auto repair shop should be sought for a four-wheel alignment to avoid safety hazards.

4

0

Share

What does Prado TX mean?

What engine does the Haval F5 use?

Reasons for Spring Noise When Turning the Steering Wheel?

How much weight can a sedan's trunk hold?

What is the maximum tonnage of trucks that a B1 driver's license can operate?

What brand is the transmission of the Classic Sylphy?

What Are the Common Faults of Sedans?

What Maintenance Does a Six-Year-Old Car Need?

Early Signs of Transmission Failure in the Excelle GT?

What is the difference between electric four-wheel drive and on-demand four-wheel drive?

Why is the BMW dashboard not lighting up?