What does 'powering off' mean for XPeng vehicles?

1 Answers
EmiliaAnn
07/29/25 9:33pm
It refers to the emergency stop switch, also known as the maintenance switch. It is used to disconnect high-voltage electricity in emergency situations or during vehicle maintenance. Battery pack capabilities: The XPeng P7 battery pack possesses a series of leading 'hidden capabilities'. The highly integrated battery pack reduces its height to 110mm while ensuring energy density and safety, maintaining the P7's low-slung sports coupe styling. Maximum efficiency of XPeng's electric drive system: The XPeng P7's electric drive system achieves a maximum efficiency of 93%. The new vehicle is also equipped with an iBooster+ESPhev decoupled braking energy recovery system, which can freely distribute mechanical braking force and electric braking force, thereby improving energy recovery efficiency.
Was this review help?
10
1
Share
More Forum Discussions

What Causes the Rear Tail Lights of a Car to Stay On?

If the tail lights of a car remain illuminated, possible causes include the brake pad return spring not retracting, a drop in the fluid level in the brake fluid reservoir, a fault in the tail light circuit, damage to the brake light switch, or the handbrake not being released. If you notice that only one side of the tail light is on, there's no need to panic—this is the vehicle's parking light feature. Additional information: 1. Vehicle parking light feature: The purpose of the vehicle's parking light feature is to warn passing vehicles at night. Generally, this hidden function is activated after parking and turning off the engine by switching the turn signal to the side where the light needs to be illuminated. If the turn signal lever is accidentally bumped after turning off the engine, this feature might be unintentionally activated. 2. Car tail lights: Car tail lights include turn signals, brake lights, position lights, rear fog lights, reverse lights, and parking lights. Turn signals and brake lights are symmetrical, with one on each side. Considering the wavelength and penetration of light, they typically come in three colors: yellow, red, and white. White light is used for better visibility, such as in reverse lights and license plate information lights. Turn signals use more noticeable colors like yellow or red, serving an alerting and warning function.
14
3
Share

What is the eBoost module in automobiles?

The automotive eBoost is a module of the braking system. Here is some information about the automotive eBoost: 1. The eBoost electronic brake assist system debuted with the new Chevrolet Silverado and GMC Sierra, as well as the 2020 Chevrolet Corvette. 2. Trailers equipped with the eBoost braking system allow General Motors engineers to incorporate larger brake rotors, calipers, and tires compared to conventional electric trailer brake systems. The new software enables the truck's computer to work in conjunction with the trailer's eBoost assist system.
12
0
Share

Is It Normal for the BMW 3 Series Air Conditioning Compressor Not to Shut Off?

Air conditioning compressor not shutting off could be due to setting issues or air conditioning damage. Reasons for the air conditioning compressor not shutting off: The car's air conditioning temperature is set too low, causing the compressor not to shut off. A faulty temperature sensor leads to the compressor not shutting off. The internal computer board thermostat of the air conditioning unit is broken, causing the compressor not to shut off. A refrigerant leak in the air conditioning refrigeration system results in insufficient cooling, causing the compressor not to shut off. Solutions: If the refrigeration system works normally after turning on the air conditioning, then the fault is likely a thermostat malfunction, and the thermostat system should be checked. First, check if the temperature sensing tube connected to the thermostat has fallen off; if so, it should be fixed back to its original position. Secondly, after prolonged use, the internal contacts of the thermostat may become sintered, the control fluid inside the thermostat may leak, or the thermistor of the electronic thermostat may change value. If the cooling effect is poor, it might be due to refrigerant leakage in the air conditioning system, causing the residual refrigerant to fall below the standard cooling capacity. As a result, the resistance value of the thermistor does not meet the required value, so the air conditioning will not shut off.
12
1
Share

What Are the Contents of Car Maintenance?

Car maintenance includes: replacement of engine oil and oil filter, air filter, gasoline filter, and pollen filter; maintenance and replacement of spark plugs; inspection and maintenance of systems such as transmission oil. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. It should be noted that the air filter and cabin air filter should be inspected first to determine if replacement is necessary. If they are not severely dirty, they can be cleaned and reused; if they are very dirty, they must be replaced promptly. The function of the air filter is to filter the air before it enters the cylinder, removing impurities, dust, sand, and other foreign particles.
15
2
Share

What Causes the Reverse Radar to Keep Beeping?

The reasons and solutions for the reverse radar continuously beeping are as follows: 1. Something is stuck on the reverse radar probe, blocking the signal; Solution: Check if there is any obstruction on the radar holes at the rear of the vehicle. 2. The rear wiper water pipe is leaking or water has seeped into the reverse radar system; Solution: Seal the leak (or replace the pipe) and drain any accumulated water in the radar system. 3. The radar ultrasonic signal is faulty, causing false alarms; Solution: Restart the engine, drive the vehicle to an open area, and try reversing again to observe the effect.
16
2
Share

What to Do When the Car Side Skirt is Dented?

The solutions for a dented car side skirt are as follows: 1. First, determine the material of the side skirt—whether it is plastic or metal; 2. For metal materials: There is usually a granular coating on the surface. In this case, you need to take it to a repair shop for panel beating and repainting. 3. For plastic materials: If the dent is not severe, you can carefully tap it with a small hammer wrapped in a towel to restore its shape, as plastic materials have some elasticity; if the damage is significant, it should be taken to a professional mechanic for repair and repainting to restore its appearance.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.