What does pollen filtration in car air conditioning mean?

2 Answers
DiClaire
09/07/25 5:45am
The following is an introduction to pollen filtration in car air conditioning: 1. The car air conditioning system, abbreviated as the car AC system, is primarily designed to provide a comfortable in-car environment for passengers under any climate and driving conditions. People's requirements for the environment often vary based on physique, age, gender, habits, and health conditions. However, under normal circumstances, the majority of people have roughly similar requirements. 2. Suitable temperature, appropriate humidity, proper airflow, and clean air constitute the three essential elements of air conditioning: temperature, humidity, and cleanliness. A complete car air conditioning system creates a comfortable cabin environment by regulating temperature, humidity, airspeed, and ventilation.
Was this review help?
15
1
Share
MacNaomi
09/19/25 5:01am
Pollen filtration is a feature in the car's air conditioning system specifically designed to filter out pollen, dust, and other fine particles from the air. My car is equipped with this feature, so I don't have to worry about pollen flying into the car and causing me to sneeze during the spring and summer flower seasons. It captures pollen through a special filter at the air conditioning intake, keeping the air inside the car fresh and clean. It's especially friendly for people with allergies, reducing nasal congestion or eye discomfort. The filter needs to be replaced regularly, about once a year or checked based on mileage, otherwise it can become clogged and affect performance. The maintenance cost is not high, usually handled during routine servicing, spending a small amount to protect health.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

How to Remove the Taillight of a Mondeo?

Method for removing the Mondeo taillight: 1. First, open the car's trunk lid and disconnect the vehicle's power supply; 2. Remove the dust cover at the back of the taillight to facilitate the replacement of the taillight; 3. Before replacing the taillight, determine which light needs to be replaced. Press the rotating handle at the back of the light, unscrew it, and then replace it with a new light, paying attention to the model and color of the light; 4. After installing the taillight, reattach the dust cover. The Mondeo is a mid-size sedan produced by Ford Motor Company, with dimensions of 4860mm in length, 1854mm in width, and 1480mm in height. In terms of safety features, this car is equipped with a body stability control system, traction control system, hill start assist, front dual airbags, side airbags, side curtain airbags, and knee airbags.
13
4
Share

What are the characteristics of American cars?

Characteristics of American cars: 1. High displacement; 2. Good power performance; 3. Large body size with spacious interior; 4. Excellent safety performance. Taking the Ford Explorer as an example: Its exterior dimensions are 5075mm in length, 2004mm in width, and 1778mm in height, with a wheelbase of 3025mm. The Ford Explorer is equipped with a 2.3T turbocharged engine, paired with a 10-speed automatic transmission, delivering a maximum power of 203 kW and a maximum torque of 425 Nm. It features a front-engine rear-wheel-drive layout, with a double-ball-joint spring shock absorber strut suspension at the front and a multi-link independent suspension at the rear.
13
0
Share

Should the throttle be completely released when shifting gears?

When shifting gears, the throttle must be fully released. If the throttle is not released, the transmission and engine will suffer significant damage, reducing the vehicle's lifespan. Additionally, shifting gears while pressing the throttle is unsafe, as the car's power will surge abruptly when the clutch is lifted. In case of unexpected situations, this can easily lead to accidents. Gear shifting should be determined based on the vehicle's speed. Before upshifting, increase the speed first; before downshifting, reduce the speed first. When driving on city streets or highways, looking down at the gearshift lever while shifting can cause the vehicle to veer off course, leading to accidents. Therefore, avoid looking down at the gearshift lever during gear changes.
3
4
Share

What does SRS in cars mean?

SRS refers to the airbag. Here are some relevant details about airbags: 1. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In the event of a car collision, airbags can reduce head injuries by 25% and facial injuries by approximately 80%. 2. The airbag mainly consists of an airbag sensor, a collision airbag, and an electronic control device. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is generally mounted on the dashboard. Airbag sensors are installed on the left, right, and center of the cabin partition; the central airbag sensor and the airbag system are integrated with the electronic control device.
5
5
Share

Can a new car be licensed without a certificate of conformity?

A car cannot be licensed without a certificate of conformity. The certificate of conformity is a proof document issued by the vehicle manufacturer, accompanying the vehicle, which states the vehicle model, test data, and configuration information. Below is the vehicle licensing process: 1. First, obtain the vehicle certificate of conformity and keep the triplicate purchase invoice. 2. Pay the vehicle purchase tax and obtain the tax certificate. 3. Prepare the original ID card and copies (make several copies for backup). Non-local residents need to provide the original and copies of the temporary residence permit. (For organizations, the original and copies of the organization code certificate are required.) 4. Register and inspect the vehicle at the vehicle management office, then select the license plate number, pay the fee, and wait to receive the plate. Generally, it takes three to five working days to get the license plate.
18
1
Share

What is the difference between an electric trunk and a sensor-activated trunk?

The differences between a sensor-activated trunk and an electric trunk are as follows: 1. An electric trunk refers to a trunk that can be opened and closed electronically. There is a door-closing button inside the trunk door, and by pressing this button, the trunk door can close automatically without manual intervention. 2. A sensor-activated trunk refers to a trunk equipped with sensors inside the vehicle, allowing the trunk to be opened or closed via sensing. Simply waving your foot under the sensor can open the trunk. 3. A trunk with sensors is very convenient. When your hands are occupied, you can easily open the trunk by moving your foot within the sensor's range.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.