What does 'Please Service ESC' mean and how to fix it?

2 Answers
OliveFitz
07/28/25 5:36pm
The dashboard displaying 'Please Service ESC' indicates a malfunction in the vehicle's Electronic Stability Control system, which should be inspected and repaired at a 4S shop as soon as possible. To resolve the issue, it is necessary to use a diagnostic tool to read the fault codes from the Electronic Stability Control system.
Was this review help?
13
4
Share
AylaRose
08/11/25 11:44pm
This "ESC Service Required" warning indicates there may be an issue with your Electronic Stability Control system. The ESC system is absolutely vital - it automatically stabilizes your vehicle when it's about to lose control, like during skidding in turns. I've encountered this before, usually caused by dirty or faulty wheel speed sensors misleading the system, though it could also be wiring shorts or module software glitches. For troubleshooting, first scan for trouble codes with an OBD scanner to pinpoint the fault. If it's just dirty sensors, you can clean them yourself, but replacement is needed if they're damaged. Don't delay repairs - it's extremely dangerous if skidding occurs at highway speeds. Visit a repair shop or dealership immediately where technicians have professional equipment for accurate diagnosis. Also, include ESC component checks during routine maintenance to prevent such issues. I personally inspect sensor areas around tires monthly for peace of mind. Remember, this warning is serious - safety comes first. Don't try to save on repair costs, get it fixed promptly.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

How long can a car be out of inspection before it can no longer be re-inspected?

If a car has been out of inspection for three years, it can no longer be re-inspected. According to the mandatory vehicle scrapping standards, if a vehicle fails to obtain an inspection compliance mark within three consecutive inspection cycles after the expiration of its inspection validity period, it must be forcibly scrapped. Service life for various types of motor vehicles: 1. Small and mini taxi passenger vehicles: 8 years; medium-sized taxi passenger vehicles: 10 years; large taxi passenger vehicles: 12 years. 2. Rental passenger vehicles: 15 years. 3. Small coach passenger vehicles: 10 years; medium-sized coach passenger vehicles: 12 years; large coach passenger vehicles: 15 years. 4. Public transport passenger vehicles: 13 years. 5. Other small and mini commercial passenger vehicles: 10 years; large and medium-sized commercial passenger vehicles: 15 years. 6. Special school buses: 15 years. 7. Large and medium-sized non-commercial passenger vehicles: 20 years. 8. Three-wheeled vehicles and low-speed trucks with single-cylinder engines: 9 years; other cargo vehicles: 15 years. 9. Special-purpose vehicles with cargo functions: 15 years; special-purpose vehicles without cargo functions: 30 years.
6
3
Share

How Much Horsepower Does the 10th Generation Accord Have?

Maximum power is 194 horsepower and 177 horsepower respectively. Below is a related introduction about the Accord: 1. Pros and Cons: The Accord features natural and smooth body lines, with a design that blends fashion and dynamism without losing steadiness. However, its power is average; some drivers report prominent issues such as thin and soft paint, weak braking, and noticeable road noise. 2. Exterior Design: The Accord's body lines are refined and fluid, combining stylish dynamism with an elegant demeanor. The all-new rear design catches the eye: it adopts the LED high-mounted brake light commonly used in luxury models and the elegant triangular combination taillights, creating a simple yet striking impression together with the unique wide license plate holder, conveying an air of sophistication and stability.
6
2
Share

Which engine is known as the Phoenix?

Peugeot's 1.6L engine, model TU5JP4, is referred to as the Phoenix. Additional information about the Phoenix engine is as follows: 1. Highlights: The TU5JP4 engine stands out for its power output at high RPMs, with a maximum power of 78kw/5750rpm and a maximum torque of 142n.m/4000rpm, placing it among the top performers in its displacement class. These achievements were attained without the use of any advanced auxiliary technologies. 2. Maintenance Cycle: The TU5JP4 is an older engine, meaning it is quite mature, with inexpensive repair and maintenance costs. Its maintenance cycle is 15,000 KM.
15
3
Share

What is the annual inspection process for vehicles over 6 years old?

The annual inspection process for vehicles over 6 years old: 1. Fill out two forms: the Motor Vehicle License and Permit Application Form and the Motor Vehicle Inspection Record Form; 2. Go to the annual inspection registration window to review and submit the materials; 3. Visit the violation inquiry window to check for any violations and pay fines if applicable; 4. Have the vehicle undergo an external inspection by an inspector, who will check the vehicle identification number (VIN) under the hood and provide a signed inspection approval page. Then, proceed to the inspection fee payment window to receive the invoice; 5. Go to the inspection registration window, leave all materials there, and drive the vehicle to the inspection workshop; 6. Wait in line for the inspection, follow the inspector's instructions, and receive an inspection report after completion; 7. Return to the service hall with the inspection report, submit it at the designated window to retrieve all materials, and sign as required; 8. Submit the materials to the window along with the vehicle registration certificate. The clerk will issue the annual inspection sticker and update the new inspection date on the back of the duplicate registration certificate; 9. After completing the inspection, affix the sticker to the upper right corner of the front windshield.
8
4
Share

What is No. 8 Hydraulic Transmission Oil?

No. 8 hydraulic transmission oil is a type of hydraulic fluid. It is commonly used in the transmissions of construction machinery. High-quality transmission oil is typically clear, often pink in color, odorless, and ensures normal operating temperatures for the transmission. Below are the related details: 1. Advantages of No. 8 Hydraulic Transmission Oil: Appropriate viscosity and excellent viscosity-temperature performance ensure the normal operation of hydraulic transmission devices. It prevents wear and tear on transmission components made of various materials under operating conditions, thereby extending equipment lifespan. Superior thermal stability and oxidation resistance ensure sensitive, accurate, and smooth operation of the hydraulic system, effectively reducing kinetic energy loss under any working conditions. Low-temperature fluidity and low pour point adapt to machinery that starts and stops frequently or operates in winter conditions. It is compatible with various conventional sealing materials and suitable for long-term recycling. 2. Application Scope of No. 8 Hydraulic Transmission Oil: Suitable for manual or semi-automatic transmissions and torque converters in all sedans, light commercial vehicles, and engineering vehicles. Applicable to the fluid power transmission systems of construction machinery such as bulldozers, loaders, pipelayers, graders, pavers, and scarifiers. Also suitable for lubricating hydraulic torque converters and couplings in various engineering machinery and transport vehicles.
17
5
Share

Are 10mm Wrenches Always Used for Removing Car Batteries?

Original vehicle battery terminal bolts typically require a 10mm wrench. Expanded information about car batteries is as follows: 1. Definition: The normal service life ranges from 1 to 8 years, largely depending on the vehicle's condition. With proper alternator charging and no electrical leakage to ground, the battery can generally last over 3 years. 2. Working Principle: It uses lead plates filled with sponge lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and 22-28% dilute sulfuric acid as the electrolyte. During charging, electrical energy converts to chemical energy, while discharging converts chemical energy back to electrical energy. When discharging, metallic lead serves as the negative electrode, undergoing oxidation to form lead sulfate; lead dioxide acts as the positive electrode, undergoing reduction to also form lead sulfate.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.