···
Log in / Register

What does parking system failure mean?

4 Answers
DelAngela
07/29/25 8:29pm

Parking system failure is caused by sensor issues that prevent the automatic braking function from being realized. The parking system refers to an automatic braking function. After activating this function, for example, when stopping at a red light, it is equivalent to not needing to pull the handbrake, which can simplify operations by avoiding the use of a handbrake or electronic handbrake. Automatic transmission models also do not need to frequently switch between D to N or D to P. The automatic parking system is a technical application that can achieve an automatic handbrake during vehicle operation. This technology allows drivers to avoid prolonged braking when the vehicle is stopped. With the automatic electronic parking brake activated, it can prevent unnecessary sliding of the vehicle. The realization of the automatic parking system function is not simply achieved by using an electronic handbrake.

Was this review help?
18
0
Share
MadisonAnn
08/14/25 5:22pm

The warning light for the parking system malfunction indicates an issue with the vehicle's parking brake, which may fail to hold the car in place, risking accidental sliding, especially on slopes or in crowded areas. I remember my old car had this problem last summer—the dashboard suddenly displayed this error, which gave me quite a scare. The causes can vary: for manual transmissions, it might be a loose handbrake cable or worn brake pads; for electronic parking systems, it’s more likely a sensor fault or a malfunctioning control module. Ignoring it can be dangerous—I once had a close call when my car nearly rolled on a slope, but luckily, nothing happened. It’s wise to regularly test the handbrake and schedule professional maintenance to prevent minor issues from turning into major hazards. For electronic systems, diagnostic tools are necessary, so avoid DIY fixes and instead rely on a trusted technician to handle these issues.

Was this review help?
2
4
Share
Expand All
HadleyLee
10/16/25 4:46am

Parking system failure usually indicates a malfunction in the parking brake function, suggesting potential issues with the braking system during parking. It may be caused by sensors, wiring, or mechanical components, such as electronic module bugs or aging handbrake cables. Vehicles with electronic parking brakes are particularly prone to this, especially in humid weather when wiring short circuits may occur. I believe this issue should not be overlooked as it directly impacts safety, especially in automatic transmission vehicles where hill-start assist may fail. Regular maintenance should include checking the cleanliness of brake-related components and the condition of fuses. For frequent use, servicing every six months is recommended to ensure everything is functioning properly. Address any issues promptly to avoid hazardous situations on the road.

Was this review help?
14
2
Share
Expand All
Maximilian
11/29/25 5:33am

When the parking system malfunction warning light comes on in your car, it simply means that the brakes may not hold properly when parked, and the vehicle could move unexpectedly. As a new driver, I didn't understand it at first, but a mechanic friend later explained that it could be due to a stuck handbrake or a short circuit in the electronic components. In electric cars, it's common to see system error prompts, while in manual types, it's often an issue with the cable. This malfunction increases the risk when parking on slopes, so it's advisable to check the handbrake's responsiveness before each drive. If you encounter this issue, safely pull over and seek help—don't panic.

Was this review help?
8
4
Share
Expand All
More Forum Discussions

How to Handle the Vehicle Technical Files During Ownership Transfer and Registration Change?

During the transfer of vehicle ownership or registration change, the vehicle technical files should be transferred along with the vehicle. Here are the specific details: 1. Road transport operators should establish: a vehicle technical file system, implementing one file per vehicle. 2. The file content should mainly include: basic vehicle information, records of vehicle technical grade evaluation, passenger vehicle type grade evaluation or annual type grade evaluation review, vehicle maintenance and repairs (including the "Motor Vehicle Maintenance Completion Factory Certificate"), replacement of major vehicle components, vehicle modifications, mileage, and records of traffic accidents that caused damage to the vehicle.
5
4
Share

Should the Levin turn on auto lights or position lights during the day?

The automatic headlight function of motor vehicles will not activate the position lights during the day. When the vehicle passes through a tunnel, the position lights and low beams will automatically turn on, and the lights will turn off after exiting the tunnel. The automatic headlight function is very convenient to use, operating through a light sensor. Relevant information about vehicle lights is as follows: 1. Introduction: Vehicle lights refer to the lamps on the vehicle, serving as tools for road illumination during nighttime driving and as signaling devices for various vehicle movements. 2. Reverse lights: Reverse lights automatically turn on when the driver shifts into reverse gear. They are white and transparent, primarily serving to alert vehicles behind that the car is reversing.
6
1
Share

Will Traffic Police Check Cars with Roof Films?

Traffic police generally do not check cars with roof films, as exterior decorations or protective measures can be appropriately chosen based on personal preferences. Below is relevant information about car films: 1. Function of Car Films: High-quality films can filter out some glare, reduce light intensity, making the eyes more comfortable, thereby improving the driver's visibility and ensuring driving safety. 2. Considerations When Choosing Car Films: Besides aesthetics and heat insulation, the transparency and clarity of the film should also be considered, as these are crucial for driving safety. 3. Light Transmission Requirements for Car Films: Chinese regulations stipulate that car films must have a light transmission rate of over 70% to pass annual inspections.
7
4
Share

Which company does NETA Auto belong to?

NETA Auto is a brand under Zhejiang Hozon New Energy Automobile Co., Ltd. Here are the specific details about NETA Auto: 1. Launch time: The NETA NO1 was officially launched at the Guangzhou Auto Show on November 16, 2019. 2. Vehicle information: The NETA NO1 is positioned as a small pure electric SUV, with body dimensions of 3872 1648 1571mm. It is equipped with a 75-horsepower electric motor, delivering a maximum power of 55kW and a maximum torque of 175N·m, with a top speed of 102km/h. The NETA NO1 has a fast charging time of 0.5 hours and a slow charging time of 14 hours, with a pure electric range of 301km as certified by the MIIT.
17
5
Share

What needs to be replaced during the second maintenance?

Second maintenance refers to the car's second scheduled service. During the second maintenance, no unnecessary replacements or cleaning are required. The following items need to be replaced during the second maintenance: 1. Engine oil replacement. 2. Oil filter replacement. 3. Air filter replacement. 4. Cabin air filter replacement. The benefits of car maintenance include: 1. Ensuring the vehicle maintains optimal performance. 2. Improving vehicle efficiency and reducing wear on parts and tires. 3. Enhancing driving safety. 4. Preventing potential hazards caused by vehicle issues. 5. Reducing noise and environmental pollution. 6. Keeping the vehicle's appearance clean and preventing damage.
13
2
Share

What items need to be replaced during the second car maintenance?

For the second car maintenance, you need to replace the engine oil, oil filter, air filter, and cabin air filter. The inspection items for the second maintenance also include: tire side slip condition, brake function and pedal clearance, clutch clearance and clutch oil volume, steering wheel clearance, air conditioning system, instrument functions, and more than a dozen other items. The key items are changing the engine oil and replacing the oil filter: 1. Changing the engine oil: You can continue using the same oil as the first maintenance for the second maintenance, or you can opt for a higher-quality oil if desired. 2. Replacing the oil filter: The oil filter's function is to remove harmful impurities from the oil in the oil pan, providing clean oil to moving parts such as the crankshaft, connecting rod, camshaft, turbocharger, and piston rings, thereby lubricating, cooling, and cleaning them, which extends the lifespan of these components.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.