What does 'outside' mean on a car?

1 Answers
VanNathan
07/29/25 6:32pm
The 'outside' on a car refers to the outside temperature. In addition to 'outside', there are other indicators on the car dashboard, such as the charging indicator light, engine fault light, and oil pressure indicator light. The specific explanations are as follows: 1. Charging indicator light: If the charging indicator light is on, it means the car cannot charge. Check if the generator belt is broken. If not, it indicates a generator fault, and a mechanic should be consulted. 2. Engine fault light: If the fault light is on, it means the air filter or oil filter is dirty and needs to be replaced or cleaned. 3. Oil pressure indicator light: If the indicator light remains on after starting the car, it means the oil is low or the oil pump is damaged.
Was this review help?
3
3
Share
More Forum Discussions

What to Do with Suspension Failure?

Suspension failure can be addressed with the following solutions: 1. Wear of ball joints or loosening of ball joint screws: Tighten the bolts and replace the connecting rods or ball joints. 2. Aging of control arm rubber bushings: Replace the swing arm bushings or the entire swing arm assembly. 3. Oil leakage or damage of shock absorbers: Replace with new shock absorbers. 4. Noise from top mounts or thrust bearings: Replace the top mounts or thrust bearings, or apply grease. Some noises may be due to loose screws on the shock absorbers. 5. Noise from stabilizer bar bushings: Replace the stabilizer bar bushings. 6. Loose connecting or fastening parts: Tighten the loose screws.
18
0
Share

What is the correct method for adding refrigerant to a car?

Automotive air conditioning refrigerant, commonly referred to as car refrigerant, is mainly divided into two types: environmentally friendly 134a and non-environmentally friendly R12. The correct method for adding refrigerant to a car is as follows: 1. After the system is vacuumed, close the high and low pressure manual valves on the manifold pressure gauge. 2. Connect one end of the middle hose to the joint of the refrigerant tank injection valve, open the refrigerant tank valve, then loosen the nut at one end of the manifold pressure gauge hose to allow gas to escape for a few minutes, and then tighten the nut. 3. Fully open the high-pressure side manual valve and invert the refrigerant tank. 4. Inject the specified amount of liquid refrigerant from the high-pressure side, close the refrigerant tank injection valve and the high-pressure manual valve on the manifold pressure gauge, then remove the gauge. When adding refrigerant to the system from the high-pressure side, ensure the engine is not running, and do not open the low-pressure manual valve on the manifold pressure gauge to prevent hydraulic shock.
13
0
Share

How much engine oil should be added to a 2.0T Mondeo?

The 2.0T Mondeo requires 4.5 liters of engine oil, but the exact amount should be determined based on the oil dipstick's scale. The Mondeo is a mid-size sedan sold by Ford Motor Company in various global markets. Below are the model configurations of the Mondeo: 1. Exterior: Features a mesh grille and chrome trim on the taillights, enhancing both texture and sportiness. 2. Features: The Intelligent Control Edition adds Baidu Carlife and a parking fresh air function. 3. Powertrain: The new model is equipped with 1.5T and 2.0T turbocharged engines in both high and low power versions.
7
5
Share

What brand of car is naval?

There is no car brand called naval. It should be Haval, Great Wall Haval, an SUV brand under Great Wall Motors. More information about Great Wall Haval is as follows: 1. Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, mainly focusing on SUV models, operates in parallel with the Great Wall brand, using independent logos and independent product development, production, and service systems. 2. The English name of Haval is "Haval", which means "free soaring". Great Wall no longer uses the "Sai" series naming method for this new car, reflecting the characteristics of Haval that are different from any previous Great Wall product. 3. Among Haval cars, the Haval H6 model has higher sales. In terms of body design, its appearance is full of sportiness, with a stable and grand body and smooth body lines, highlighting a steady and tough temperament. The Haval H6 has a high space utilization rate. Although it is a compact SUV, the interior space is designed to be very spacious.
4
1
Share

What are the emergency solutions for a car with a dead battery?

There are several emergency solutions for a car with a dead battery: 1. Jump-starting. First, connect the positive terminals of both cars with a red cable, and the negative terminals with a black cable. In this case, you can use a metal part in the engine compartment as the negative terminal, commonly known as grounding. After connecting, start the ignition. 2. Push-starting. First, turn the key to the ignition position, press the clutch, release the handbrake, and put the gear in 1st or 2nd. Keep the clutch pressed and start pushing the car. When the speed reaches 5 km/h, slowly release the clutch and press the accelerator to start the car. 3. Using a portable car emergency charger. The principle of a car emergency charger is similar to that of a phone power bank. When the battery is dead, you can charge the car to start it. Simply clip the charger's clamps onto the battery terminals and press the charger's switch.
5
5
Share

How to Choose Xenon Lamp Models?

Here are the methods for selecting xenon lamp models: 1. Pay attention to the origin of the product when choosing xenon lamps. Avoid counterfeit name brands. It is best to choose complete sets of xenon lamps produced by well-known imported brands or domestic manufacturers with technical patents. 2. Check for the EU e-mark certification. The EU e-mark certification is a globally recognized technical standard. If the xenon lamp product has obtained this certification, it ensures compatibility with other electronic devices in the car. 3. Examine the craftsmanship details of the product, such as polarity markings on wire ports and waterproof design. These details reflect the maturity of the product. Not only do they ensure qualified product quality, but they also prevent interference during use. When selecting, carefully inspect the product's craftsmanship, such as the connection of the ballast to the fixed bracket, as these areas are often overlooked. 4. The color temperature of xenon lamps is not necessarily better when higher. The typical color temperature of xenon lamps ranges from 4000K to 6000K. Higher values, such as 8000K or above, can actually reduce lighting effectiveness. Common color temperatures for xenon lamps include 4300K, 6000K, and 9000K.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.