What does ordinary license plate swapping mean?

1 Answers
DeCarter
07/25/25 8:58am
Ordinary license plate swapping refers to the service of exchanging license plates between non-commercial vehicles under the same owner's name, registered in the same location, and of the same license plate type. Prerequisites for ordinary license plate swapping: Non-commercial vehicles under the same owner's name and of the same license plate type can apply to swap license plate numbers once within a year. This means that license plate numbers cannot be swapped between vehicles under different owners' names unless both parties agree to transfer ownership through sale. Process for ordinary license plate swapping: Procedure: The vehicle owner needs to bring the identity proof of the vehicle owner (such as ID card, vehicle registration certificate, and driver's license, etc.) to the vehicle management office to apply for registration and replacement, and the process can then be completed.
Was this review help?
11
2
Share
More Forum Discussions

What is the fuel consumption per 100 km for the Ford Raptor 6.2?

The Ford Raptor 6.2L model equipped with a 412-horsepower V8 engine has an NEDC fuel consumption of 16.7L per 100 km. The fuel tank capacity of the Ford Raptor 6.2L is 136L. The distance it can travel on a full tank is as follows: For the model with the 412-horsepower engine, the distance it can travel on a full tank is 136/16.7*100=814 km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
5
0
Share

Which car is the Volkswagen Motion?

Volkswagen Motion does not refer to a specific car model, but rather to Volkswagen's four-wheel drive system, officially known as 4MOTION. Volkswagen's 4MOTION four-wheel drive system is equipped on many models under the Volkswagen brand, with the most famous being the performance hot hatch Golf R. Volkswagen's 4MOTION system is a full-time four-wheel drive system that integrates many advanced technologies. This four-wheel drive system can freely distribute power based on the vehicle's driving conditions, theoretically capable of allocating all power to a single wheel in extreme situations. Volkswagen's 4MOTION system is a four-wheel drive system installed on front-wheel-drive vehicles with transversely mounted engines. This system draws power from the front axle differential, then transmits it to the rear axle via a central driveshaft, and finally distributes the power to the rear axle through a four-wheel drive coupler. This four-wheel drive system is highly efficient and intelligent, capable of distributing power between the front and rear axles according to the vehicle's needs. In addition to 4MOTION, Volkswagen also offers an enhanced four-wheel drive system called 4xMOTION, which is an optional system for models like the Touareg. It uses a Torsen torque-sensing self-locking differential combined with an electronic assist system, equipped with a rear axle locking mechanism. When wheel slip is detected, the Torsen limited-slip differential mechanically limits slip between the front and rear axles, while the electronic assist system handles inter-wheel slip control.
7
0
Share

How to Eliminate Static Electricity in Cars During Winter?

Methods to eliminate static electricity in cars during winter include: 1. Place a humidifier inside the car; 2. Install a static discharger on the roof; 3. Place a damp towel on the dashboard. Causes of static electricity in cars are: 1. Friction between the driver's clothing and the car's interior materials; 2. Friction between the car body and dust in a dry environment; 3. Accumulated charge on the human body caused by friction between skin and clothing. Effects of static electricity on cars include: 1. Reduced lifespan of electronic components in the car; 2. Increased noise and interference in car electronics, reducing their reception quality; 3. Increased dust accumulation on the car's surface.
4
3
Share

What is the reason for the lack of reverse camera display when the Volkswagen Sagitar is in R gear?

The reason for the lack of reverse camera display when the Volkswagen Sagitar is in R gear is due to poor contact of the reverse camera switch. The Sagitar is a compact car model under the Volkswagen brand. Taking the 2018 Sagitar as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. The 2018 Sagitar features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
15
0
Share

How to Deal with a Clogged Car Radiator?

To address a clogged car radiator, the following methods can be employed: 1. Replace the vehicle's radiator to restore its normal functionality; 2. Use a descaling agent to remove scale buildup; 3. Utilize specialized unclogging equipment to clear the blockage; 4. Replace the section of the vehicle's piping that is obstructed. The function of a car radiator is to dissipate excess and unnecessary heat from the engine, ensuring that the engine operates within normal temperature ranges under various speeds or driving conditions. Key precautions when using a car radiator include: 1. Preventing the radiator from overheating; 2. Regularly replacing the coolant; 3. Avoiding the use of tap water as a substitute for coolant; 4. Selecting high-quality diluted water or antifreeze for the radiator; 5. Performing regular anti-rust treatments on the radiator; 6. Promptly addressing any radiator malfunctions to prevent further damage from continued use.
5
1
Share

What does the Mercedes-Benz rear button mean?

Mercedes-Benz rear button refers to the rear windshield defogging button, which is located on the air conditioning control panel. When activated, it can defog the rear windshield. Taking the 2021 Mercedes-Benz S500 as an example, it belongs to the full-size car category with body dimensions of: length 5290mm, width 1921mm, height 1503mm, wheelbase 3216mm, and fuel tank capacity of 76l. The 2021 Mercedes-Benz S500 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 3.0L twin-turbocharged engine producing maximum horsepower of 313ps, maximum power of 230kw, maximum torque of 450nm, paired with a 9-speed automatic transmission.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.