What does OPS mean on a car?

1 Answers
OStephanie
07/30/25 1:42am
OPS on a car stands for Optical Parking System, which is essentially an extension of the parking assistance system, commonly known as parking radar functionality. The Optical Parking System analyzes, processes, and calculates the ultrasonic signals reflected back from obstacles detected by the parking radar's ultrasonic sensors. It calculates the distance between the obstacle and the car, determines the relative position of the obstacle to the car, and then displays a highly intuitive animated simulation image on the LCD screen of the audio navigation system. While driving, it's important not to overly rely on these assistance systems; instead, practice more to improve your driving skills. When parking, frequently check the side mirrors on both sides to gauge the distance between the rear wheels and the parking line, as well as the distance between the rear of the car and any obstacles.
Was this review help?
8
1
Share
More Forum Discussions

What is the method for adjusting the gear lever clearance on the new Santana?

The method for adjusting the gear lever clearance on the new Santana is as follows: First, the dust cover of the gear lever needs to be separated from the center console. There are two small holes on the gear shift mechanism base, which need to be secured with a screwdriver. This allows adjustment of the gear shift mechanism. The clearance in the gear lever cable occurs because the driver does not fully depress the clutch when shifting gears. The new Santana completely abandons the boxy design of the 1970s seen in the old model, replacing it with a more modern, stylish, and dynamic appearance. The side profile of the new Santana doesn't have many highlights, featuring a clean and simple overall design without exaggerated lines. The waistline running from front to rear gives the body a very dynamic tension.
8
3
Share

What does it mean when the water temperature gauge of the Sylphy Classic turns red?

Sylphy Classic's water temperature gauge turning red indicates that the car's water temperature is too high. If the water temperature warning light comes on while driving, it means the engine temperature is excessively high. In such cases, it is necessary to stop the car and inspect it as soon as possible. Continuing to drive with an overheated engine can cause severe damage and irreversible harm to the engine. The Sylphy has body dimensions of 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm. Its fuel tank capacity is 47L, and its fuel consumption ranges from 4.9 to 5.7L per 100 kilometers.
18
3
Share

Can Modified Headlights Pass the Annual Vehicle Inspection?

Modified headlights can pass the annual vehicle inspection. Below are the specific requirements for headlights during the inspection: 1. Requirements for low beam positioning: When the headlights are projected onto a screen 10 meters away, the horizontal deviation of the low beam to the left should be ≤170mm, and to the right should be ≤350mm. However, this light deviation is only a recommended maintenance item, not a disqualifying factor. Even if the vehicle fails in this aspect, the overall evaluation on the report will still be pass. 2. Light intensity requirements: Four-lamp vehicles need to achieve 12,000 CD, and two-lamp vehicles need to reach 15,000 CD to pass.
18
3
Share

How to reset the tire pressure monitoring light on a Soueast DX3?

Soueast DX3 resetting the tire pressure monitoring light can be done by lightly pressing the black rod on the odometer. Here are some additional details: 1. When a tire leaks, it can cause the vehicle to pull to one side. A front tire leak or blowout at high speeds can be dangerous, while a rear tire blowout or leak can cause severe shaking. 70% of highway accidents are caused by tire issues, with 80% of those due to abnormal tire pressure or temperature. 2. Real-time monitoring of tire pressure. Installing a tire pressure monitoring alarm in the vehicle can help prevent accidents caused by abnormal tire pressure. 3. Each tire is equipped with a highly sensitive sensor transmitter. It monitors the tire's pressure and temperature in real time, with data signals wirelessly transmitted to the vehicle's terminal receiving system.
9
0
Share

What is the 0-100 km/h acceleration time for a Mustang after stage 1 tuning?

After stage 1 tuning, the Mustang's 0-100 km/h acceleration time is approximately 5.1 seconds. Only the 2.3T model of the Mustang can have its power increased through tuning programs, while the 5.0L model cannot. The Mustang is a two-door sports car under Ford, with a wheelbase of 2720mm, and dimensions of 4794mm in length, 1916mm in width, and 1391mm in height. The front face of the Mustang appears somewhat conservative, not significantly different from ordinary sedans, but the two creases on the engine hood help to adjust the overall front atmosphere. The black honeycomb radiator grille further accentuates the imposing presence of the chrome emblem.
17
0
Share

How often should the brake discs of a Ford Mondeo be replaced?

Ford Mondeo brake discs should be replaced at around 100,000 kilometers. Here are some additional details: 1. A brake disc is a round disc that rotates as the vehicle moves. The brake caliper clamps the brake disc to generate braking force, slowing down or stopping the vehicle when the brakes are applied. 2. Disc brakes have better heat dissipation than drum brakes, preventing brake fade and failure during continuous braking. 3. The thermal expansion of brake discs in the thickness direction is minimal, so heat-induced size changes do not increase brake pedal travel. 4. Disc brake systems respond quickly and can perform high-frequency braking actions, making them more compatible with ABS system requirements.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.