···
Log in / Register

What Does One-Click Vehicle Relocation Mean?

6Answers
AnastasiaFitz
07/29/2025, 09:57:54 PM

One-Click Vehicle Relocation is a feature within the Traffic Management 12123 APP for moving vehicles. When a car owner's vehicle is blocked by another vehicle, they can use this function to remind the other party to move their car. The specific method of use involves downloading the Traffic Management 12123 APP on a mobile phone, filling in the required information, and taking a photo of the license plate to conveniently locate the car owner and request vehicle relocation. Features of One-Click Vehicle Relocation: This service is available for small cars, large cars, small new energy vehicles, and large new energy vehicles. Each car owner can initiate up to 5 relocation notifications per month. If the notified car owner confirms that their vehicle is parked normally and does not obstruct traffic, they can file an appeal. The system administrator will review the appeal information. Malicious submission of relocation requests will result in blacklisting upon verification. Applying for One-Click Vehicle Relocation: After a car owner applies for One-Click Vehicle Relocation, the system will notify the blocking car owner to move their vehicle within 10 minutes. If the vehicle is not moved within 10 minutes of the notification, the applicant can click a reminder button, and the system will notify the blocking owner again. If the blocking owner has not downloaded or registered the APP, the system will notify them via SMS to the phone number registered during license plate registration.

Was this review help?
106
Share
McViolet
08/15/2025, 03:52:39 AM

As a frequent electric vehicle user, I think the one-touch parking assist is a smart feature that allows the car to move automatically via a mobile app, such as Tesla's Summon mode. With just a tap on the screen, the car can drive out or park itself over a short distance. It's especially handy in crowded parking lots, saving me the hassle of squeezing in to operate the vehicle—both convenient and high-tech. I find it super useful on rainy days or when carrying items, but remember to use it on flat ground and avoid high-traffic areas to prevent sensor misjudgments of obstacles. This function relies on GPS and onboard cameras, representing a major advancement in modern automotive technology. Although it comes at a higher cost, it's a worthwhile investment.

Was this review help?
9
Share
Expand All
SamuelDella
10/20/2025, 11:28:15 PM

From the perspective of an average car owner, the one-click vehicle relocation service is a practical feature in traffic apps like 12123 or WeChat mini-programs. With just a tap, it can notify the owner of the car blocking yours to move. After submitting the license plate number and location, the system automatically sends an SMS reminder. I've tried it a few times, and the response is quick, helping to avoid direct conflicts. This feature is a lifesaver during daily urban parking shortages, especially when you're in a hurry to go out with kids or get to work, saving valuable time. When using it, always take photos as evidence to prevent disputes, and it's recommended to use GPS positioning for accurate location description.

Was this review help?
14
Share
Expand All
DeLeah
12/03/2025, 10:53:56 PM

From a tech enthusiast's perspective, one-touch parking involves a vehicle's remote control system, where the car moves via ultrasonic sensors triggered by a mobile signal, enabling automatic parking or exiting. This feature is applicable to high-end models supporting autonomous driving. I find it convenient but emphasize the importance of keeping sensors clean, as dust or rain can affect accuracy. System updates can enhance reliability.

Was this review help?
20
Share
Expand All
ElainaAnn
01/24/2026, 12:17:41 AM

As a safety-conscious driver, I've used the one-touch car moving feature a few times in crowded parking spaces and found it labor-saving. However, I've only tried it in flat and open environments to avoid complex terrains. This function relies on battery power and network signals, with inherent failure risks, so I recommend prioritizing manual operation to ensure safety. The related app also includes notification features to resolve parking disputes.

Was this review help?
16
Share
Expand All
LaTimothy
04/19/2026, 11:29:09 PM

Experienced users say that the one-touch parking feature, which controls automatic movement via the in-car app, is convenient for daily use but slightly increases power consumption, and sensors should be checked during maintenance. It saves the hassle of squeezing into tight spots in flat parking lots, but professional repair is needed in case of equipment failure. Low-cost apps on the market may pose privacy risks, so choosing official services is more reassuring.

Was this review help?
12
Share
Expand All
More Q&A

How to Judge the Distance on the Right Side of the Car?

Methods to judge the distance on the right side of the car: Use the right wiper and rearview mirror to estimate the distance. Generally, when the node of the right wiper aligns with the roadside, slightly steering to the left can achieve parking about 10cm from the curb. When the extension line of the lane divider is about 10cm from the lower left corner of the windshield, the vehicle is approximately 50 to 60cm from the left lane. Similarly, if there is a traffic barrier or curb on the left, this method can also be applied. When the edge of the car's front aligns with the lower edge of the license plate of the car ahead, the distance is about 0.5 meters. Judging the rear distance is much simpler with the assistance of a reversing camera or parking sensors, as the rear blind spot is relatively large. If observing from the interior rearview mirror, when the area below the engine hood of the rear vehicle is obscured, the distance to the rear vehicle is about 5 meters. Similarly, when the rear windshield of the following car is just visible in the rearview mirror, the distance is approximately 0.5 meters.
116
Share

What should be noted after driving a turbocharged car at high speed?

After driving a turbocharged car at high speed, it is important to avoid excessively high engine RPM. Do not turn off the engine immediately after high-speed driving; instead, let the engine idle for three minutes to assist in cooling the turbo. The key component of a turbocharger is its bearing. This type of bearing, named after its lubrication method, is referred to as a 'full-floating bearing' and operates at extremely high speeds under harsh conditions. Turbocharging can be categorized into four types: mechanical supercharging, pressure wave supercharging, exhaust gas turbocharging, and compound supercharging. Essentially, a turbocharger is an air compressor that increases engine power and torque by compressing air to enhance the engine's air intake, thereby making the vehicle more powerful.
110
Share

Why does the engine shake after cleaning the throttle body?

The reason for engine shaking after cleaning the throttle body is: When cleaning carbon deposits from modern electronic throttle bodies, an idle speed reset learning procedure must be performed after cleaning. If the idle learning is not completed, the vehicle may experience shaking, unstable idle speed, difficulty starting, or stalling. The correct method for cleaning the throttle body requires two people to cooperate: 1. One person sits in the vehicle and turns the ignition switch to the power-on mode (without starting the engine), then pressing the accelerator pedal will open the throttle; 2. The other person removes the intake pipe in front of the throttle body to expose it, then cleans it with lint-free cloth and specialized cleaner (which usually comes with a plastic nozzle - be careful to prevent the nozzle from falling into the throttle body); 3. After cleaning, reassemble the intake pipe, then connect a specialized computer via the OBD interface to perform throttle reset and idle speed learning. Typically, after cleaning the throttle body and completing idle learning, actual road driving is still required to allow the engine ECU to better complete the learning process.
112
Share

How many seats does the Camaro have?

The Camaro is a four-seater vehicle. It features the North American original RS sports package, with xenon headlights and LED daytime running lights that deliver excellent visual effects. The high waistline design gives the rear of the car a very tall and sleek appearance, while the taillights adopt Chevrolet's new family-style design, and the exhaust pipes are arranged in a dual-outlet layout. The car measures 4786mm in length, 1897mm in width, and 1356mm in height, with a wheelbase of 2811mm. The Camaro convertible version has undergone some improvements but remains consistent with the details of the new hardtop version, primarily featuring minor refinements to the front grille. The headlights have a flatter design and incorporate angular lines.
109
Share

How to Fold Down the Rear Seats of the Borui GE?

The rear seats of the Borui GE do not support adjustment or folding down. However, the rear center armrest can be folded down to access the trunk, serving as an emergency opening channel. Car seats are the seating areas for passengers and can be roughly categorized by location: 1. Front seats: headrest, backrest, seat cushion, armrest; 2. Rear seats: (headrest), backrest, seat cushion, side wings, armrest. Car seats can be classified by shape into split seats and bench seats; by function into fixed, removable, and adjustable seats; and by passenger capacity into single, double, and multi-passenger seats. In terms of body dimensions, the Borui GE measures 4986mm in length, 1861mm in width, 1513mm in height, with a wheelbase of 2870mm.
118
Share

How to Repair Scratched Alloy Wheels?

Methods to repair scratched alloy wheels: 1. First, use water sandpaper to smooth out the scratched area, then begin wet sanding; 2. If dirt is found in the scratched area, clean it with a toothbrush, then apply filler, commonly known as putty; 3. After filling all the scratches, wait a few hours, then use 1000-grit water sandpaper for sanding again; 4. The next step is painting. First, smooth the previously applied filler with 1000-grit water sandpaper until it feels very smooth to the touch. Use a card to separate the wheel from the tire in preparation for painting.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.