What does oilservice mean?

1 Answers
StKing
07/30/25 5:10am
oilservice means that the car needs maintenance. The maintenance content includes: 1. Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 2. Inspect the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for scratches; 3. Replace engine oil, oil filter, clean the air filter, and check whether the generator belt and wiper blades are damaged; 4. Check whether the levels of various fluids are normal; 5. Inspect all switches and lights in the car to ensure they are working properly. Maintenance precautions are: 1. Make an appointment in advance; 2. Record any faults or questions encountered while driving and inform the staff during maintenance registration.
Was this review help?
1
1
Share
More Forum Discussions

What are the test items for the road driving skills test in Subject 3?

Subject 3 road driving skills test items include: preparation before driving, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving. Below is a related introduction to the test items: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test (Subject 1) written test, computer-based with a full score of 100, 90 or above is passing (including 90). 2. Subject 2: Field driving skills test (Subject 2) conducted on-site with a real vehicle. Results are only pass or fail. Required test items include reversing into a parking space, parallel parking, S-curve driving, right-angle turning, and hill start and stop, performed in sequence. Full score is 100, 80 or above is passing (including 80). 3. Subject 3: Road driving skills test (Subject 3) conducted on roads or simulated sites with a real vehicle. Full score is 100, passing scores are 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: Safe and civilized driving-related knowledge test (Subject 4) written test, full score is 100, 90 or above is passing (including 90).
7
3
Share

How late can you be for Subject 2 exam before being disqualified?

This depends on whether you have received your exam sequence number. If you have not yet received your exam sequence number, you can still take the exam as long as you arrive within the scheduled exam time for that day. However, if you have already received your exam sequence number and fail to take the exam due to lateness, you will not be allowed to take the exam and will have to schedule a make-up exam. In the scoring deduction items for the Subject 2 exam, deduction item code 10124 clearly states that if a candidate fails to attend the exam at the scheduled time, 100 points will be deducted, and the exam will be recorded as a failure. Below are some important notes for the Subject 2 exam: 1. Fasten your seatbelt: You must fasten your seatbelt immediately after getting into the car. Make sure not to buckle it incorrectly or buckle it on the passenger side, as the system will directly disqualify you if this happens. Do not unfasten your seatbelt at any point during the exam. 2. Adjust your seat and mirrors: After getting into the car, adjust your seat, mirrors, fasten your seatbelt, turn on the left turn signal, shift into first gear, and release the handbrake. These six steps are essential. Ensure all preparations are complete before starting. 3. No stopping during the exam: There is no time limit for the reverse parking test, but you must not stop during the process. If the wheels remain stationary for 3 seconds, the system will judge it as stopping midway. Therefore, controlling the speed is crucial. 4. The hill start must be completed within 30 seconds: The hill start must be completed within 30 seconds. The system will give a voice prompt every 10 seconds, and exceeding 30 seconds will result in disqualification.
17
3
Share

How to Set Up One-Touch Auto Up/Down for Nissan Sylphy Windows

Taking the 14th generation Sylphy as an example, the method to set up one-touch auto up/down for windows is as follows: 1. Lower the driver's window completely. 2. Turn the ignition switch off and then back on to the ON position. 3. Pull the driver's window switch upward to the highest position. 4. After the window reaches the top, hold the switch for 5-10 seconds before releasing. 5. Turn off the ignition switch and wait for 10 seconds to complete the one-touch window function setup. Here are some key features of the 14th generation Sylphy: 1. The new Sylphy is equipped with an evolved third-generation HR16 engine, with slight improvements in power and torque. It delivers a maximum power of 139 horsepower and a maximum torque of 169 N·m. 2. The transmission system is matched with a CVT gearbox. With the help of ECO mode and ISS (Intelligent Start-Stop system), the manufacturer claims the fuel consumption can be as low as 4.9L/100km, and it meets the China VI emission standards. 3. The dimensions of the new 14th generation Sylphy have been slightly increased. It measures 4641mm in length, 1815mm in width, 1447mm in height, with a wheelbase of 2712mm.
11
3
Share

Where is the towing hook of Bora?

The towing hook of Bora is usually located in the trunk of the car or in the vehicle tool kit. Here is some information about the towing hook: Towing hook, also known as tow ball, is a traction device connected to the rear bumper beam of the vehicle, mainly installed on ordinary household vehicles and self-propelled RVs. The function of the towing hook is to install it for towing small trailers and towed RVs. Of course, it can also be used to install some rear bicycle racks, luggage racks, etc., increasing the vehicle's cargo space. How to use the towing hook: Find the towing hook position at the rear of the towing vehicle and the front of the towed vehicle. The towing hook position is designed at the lower part of the bumper. By observing the front and rear bumpers, you can find a hidden space covered with a round or square cover, which is the location of the car's towing hook. Install the towing tool. Whether you choose a soft or hard towing tool, ensure that the connection to the car hook is secure and reliable during installation. If the tow hook is designed with a safety lock, make sure it is locked in place. Precautions for using the towing hook are as follows: Pay attention to making wide turns when turning. Because when the towed vehicle is hooked up, it is equivalent to the extension of the vehicle body and the corresponding increase in the turning radius. To avoid accidents such as scraping pedestrians and non-motorized vehicles, it is recommended to make wide turns in this situation. Pay attention to the tire pressure of small trailers. When passing speed bumps with a trailer, if the tire pressure of the trailer is maintained at the normal 2.5bar, it is likely to bounce, causing the trailer to separate from the towing hook, which is very dangerous. The reason is that many small trailers have rubber torsion axles as their suspension system, so their shock absorption effect is not ideal. It is recommended to reduce the tire pressure of small trailers to about 1.3bar, so that the tires can also play a role in shock absorption. When reversing, it is recommended to first remove the trailer or RV behind the car from the towing hook. Because reversing while towing will cause the trailer or RV to swing randomly, making it difficult to park the vehicle in the parking space. Also, when a vehicle equipped with a towing hook reverses into a parking space, if there are obstacles or other vehicles behind the parking space, more empty space needs to be left than for ordinary vehicles. Otherwise, the towing hook is likely to hit the obstacles or vehicles behind. Similarly, pay attention to the rear situation when parking horizontally.
17
0
Share

Can You Drive in Flat Sandals?

You can drive in flat sandals, but you cannot drive in flip-flops. Regulations on footwear for driving: According to relevant laws, motor vehicle drivers are not allowed to drive barefoot, in slippers, or in high heels. Violators will be fined 50 yuan, and those who cause traffic accidents will be fined 200 yuan. In the event of an accident, if one driver is wearing slippers, even if they are not at fault in the accident, they will still be penalized by traffic police for driving in slippers. If both parties are found to be at fault, the driver wearing slippers will not only bear the accident responsibility but also face additional penalties. Footwear unsuitable for driving: High-top shoes, snow boots, thick-soled sneakers, platform shoes, and Crocs are unsuitable for driving. These types of shoes can restrict joint movement due to the coverage of the legs and ankles, reducing agility and increasing the risk of rear-end collisions due to delayed braking. Additionally, their wide shape and soft soles can cause the foot to slip inside the shoe, leading to braking errors and significant safety hazards. Footwear suitable for driving: Lightweight shoes. Heavy shoes are generally bulky and less flexible, potentially hindering ankle movement and causing inconvenience. In emergencies, heavy shoes may prevent timely and precise reactions. Shoes with a high fit to the foot. If the sole and toes do not fit snugly in the shoe, the driver may not have sufficient sensitivity to the pressure applied. Shoes with moderate friction. Only shoes with adequate friction can ensure proper contact between the sole and the pedals, thereby ensuring safe driving.
12
3
Share

Can I drive with a tire pressure of 1.0 bar?

Tire pressure below 1.0 bar is not safe for driving. Modern vehicles are equipped with tire pressure monitoring systems that typically alert when tire pressure falls below 1.5 bar. This threshold is also applicable to tires without pressure sensors. It is advisable not to go below this value, as excessively low tire pressure can lead to severe consequences, including tire blowouts, which are extremely dangerous. Hazards of low tire pressure: Increased friction with the road surface, leading to higher fuel consumption; Heavier steering wheel and increased tendency for the vehicle to drift, compromising driving safety; Excessive movement of tire components, causing abnormal heat buildup due to over-flexing; Reduced functionality of tire cords and rubber, leading to delamination or cord breakage, excessive friction with the rim causing damage to the bead area, and abnormal wear; Exponentially increased friction between the tire and the ground, causing a rapid rise in tire temperature, softening of the tire, and a sharp decrease in strength. High-speed driving under these conditions may result in a blowout; Increased deformation of the tire body, leading to cracks on the sidewalls, excessive flexing movements, overheating, accelerated rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.