What does NVH performance mean?

What to Do When a Haima Car Suddenly Fails to Start?

First, you can wait for the tachometer and speedometer to return to their positions after turning the key before starting. Even if the owner does not drive after each ignition, the car should be allowed to run for two or three minutes before turning it off.

8

4

Share

What is the correct way to measure engine oil?

Before measuring the engine oil, pull out the dipstick, wipe it clean, reinsert it, and then pull it out again to check the oil level. If the oil level is between the two marks on the dipstick, it indicates the oil quantity is normal. Generally, you should wait for about 15 minutes after turning off the engine to allow the oil to stabilize before checking. Ensure the vehicle is parked on a level surface when checking the oil to guarantee an accurate measurement. The first time you pull out the dipstick, wipe it clean before reinserting it, then pull it out again to check the oil level. This ensures an accurate and intuitive reading of the oil quantity. Park on level ground. To ensure the accuracy of the dipstick measurement, the car must be parked on a flat surface. This is easy to understand—if the surface is uneven, especially on steep ground, any measurement will be inaccurate. Cold engine condition: Measure the engine oil using the dipstick when the engine is cold. This is a detail many car owners overlook. Some might ask: Is this really necessary? Based on years of experience, it absolutely is. Engine oil lubricates the engine's moving parts and flows inside the engine to reduce friction. When the engine is hot, some oil remains adhered to the components. Measuring the oil level under these conditions will result in inaccuracies, typically a few millimeters off.

8

4

Share

What to Do About Steering Wheel Noise in the Enclave?

Steering column lacks lubrication, resulting in high friction. Check if the power steering fluid is insufficient. Inspect the universal joint for any issues. Examine whether the rubber bushings of the suspension stabilizer bar links on the chassis have aged and hardened. Damaged plain bearing.

1

2

Share

How to Fold Down the Rear Seats of the Honda Haoying?

Enter the car and remove the shoulder strap of the rear seatbelt. Then pull the rear seat release switch in the trunk. Next, fold down the seats. To adjust the headrest of the Honda Haoying seats, use both hands to grasp the sides of the headrest and pull upward to raise the headrest position. To lower the headrest, press the button and move the headrest downward.

20

0

Share

What are the differences between the Mazda6 Atenza 2.0 and 2.5?

Here are the differences between the Mazda6 Atenza 2.0 and 2.5: 1. Fuel consumption difference. The factors affecting a car's fuel consumption are nothing more than the following: the vehicle's weight, displacement, transmission, and driving style. A mere 0.5-liter displacement difference has minimal impact on fuel consumption. The factors that truly significantly affect fuel consumption are the vehicle's weight and driving style, while larger displacement often has little effect. 2. Different engines have their own optimal efficiency RPM ranges. However, larger displacement engines are more powerful, making it harder to reach the ideal RPM during normal driving. The 2.5L engine's optimal efficiency RPM range is between 2500-3000 RPM, but maintaining this RPM may be more fuel-efficient but could also mean exceeding the speed limit. A smaller displacement engine maintaining this RPM might be just right, which is why the 2.0 is more fuel-efficient. 3. Configuration: In terms of engine power, the 2.5L naturally aspirated engine has a maximum power of 192 horsepower (141 kW) at 6100 RPM and a maximum torque of 252 Nm at 3250 RPM. The 2.0L naturally aspirated engine has a maximum power of 158 horsepower (116 kW) at 6400 RPM and a maximum torque of 202 Nm at 4000 RPM.

16

3

Share

What Do Front Overhang and Rear Overhang Refer To?

The meanings of front overhang and rear overhang in automobiles are as follows: 1. The front overhang and rear overhang of a car constitute a shock absorption system. The front overhang refers to the horizontal distance from the center of the front wheel to the front end of the car. The length of the front overhang should be sufficient to secure and install the engine, radiator, steering gear, etc.; 2. The rear overhang of a car is the distance between the vertical plane passing through the centerline of the last wheel axle and the vertical plane touching the rearmost part of the vehicle (including towing devices, license plates, and any rigid components fixed at the rear of the vehicle) and perpendicular to the longitudinal symmetry plane of the vehicle. Simply put, it is the horizontal distance from the center of the rear wheel to the rearmost part of the car; 3. The length of the rear overhang mainly depends on the length of the passenger compartment, the wheelbase, and the distribution of miscellaneous loads. The rear overhang should not be too long; otherwise, the departure angle will be too small, and the turning will not be flexible; 4. Therefore, Chinese regulations stipulate that the rear overhang of buses and enclosed vehicles must not exceed 65% of the wheelbase, and the rear overhang of other vehicles must not exceed 55% of the wheelbase.

6

2

Share

What does NVH performance mean?

What to Do When a Haima Car Suddenly Fails to Start?

What is the correct way to measure engine oil?

What to Do About Steering Wheel Noise in the Enclave?

How to Fold Down the Rear Seats of the Honda Haoying?

What are the differences between the Mazda6 Atenza 2.0 and 2.5?

What Do Front Overhang and Rear Overhang Refer To?

How to Adjust the Height of a Jaguar Steering Wheel?

Can the driving test be extended if it expires before completion?

Which region does the license plate starting with 'Qin' belong to?

What is the method for smoothly stopping by applying the brakes?