What does NGP mean for cars?

2 Answers
Jimenez
07/24/25 12:26pm
XPeng Motors' NGP refers to the Navigation Guided Pilot system, which stands for Navigation Guided Pilot. It is based on the user-set navigation route to achieve automatic navigation-assisted driving from point A to point B. The following is an introduction to NGP: 1. NGP functions: After activation, NGP not only includes the original ACC adaptive cruise control, LCC lane centering assistance, ALC automatic lane change assistance, but also features automatic selection of the optimal lane, automatic overtaking of slow vehicles, automatic speed limit adjustment, automatic highway ramp entry and exit, avoidance of traffic cones and broken-down vehicles, and nighttime overtaking reminders. 2. Taking the XPeng P7 as an example: It is positioned as a mid-size pure electric coupe. The car features a coupe-specific streamlined shape, a fastback extending ducktail design, semi-hidden wipers, low-drag exterior mirrors, and other low-drag design details, as well as an AGS active grille and an almost completely flat low-drag chassis, which play a key role in reducing the drag coefficient and increasing the driving range.
Was this review help?
10
2
Share
DiEmilia
08/11/25 6:33am
I remember the first time I learned about NGP was when my friend mentioned it while talking about XPeng's electric vehicles. NGP stands for Navigation Guided Pilot, which translates to a navigation-guided autonomous driving assistance system, primarily used on highways to help drive the car automatically. It acts like a little assistant, using onboard cameras, radar, and high-precision maps to control speed, change lanes automatically for overtaking, and even follow the navigation route—all while I just need to keep my hands on the wheel and stay alert. Honestly, driving has become much easier, especially during long road trips, with significantly less fatigue. However, it relies heavily on clear maps and good weather; its effectiveness can drop in rain or heavy fog. I think this technology is pretty cool—it’s a key step for XPeng in advancing intelligent driving, making travel safer and more comfortable. But it’s crucial to emphasize that it’s not fully autonomous; drivers must always stay vigilant to avoid accidents. Many car owners are eager to try it out now, and it might become even more widespread in the future, helping reduce accidents for everyone.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

Where is the tire pressure reset button for Mazda CX4?

The tire pressure reset button for Mazda CX4 is located in the central control display. The usage method is as follows: 1. Turn on the ignition switch, press the 'car' button, and the screen will display the maintenance cycle; 2. Press the 'back' button to return, then the screen will show vehicle maintenance and inspection. Use the knob to select the tire pressure monitoring system; 3. Rotate the knob to select the 'store now' option; 4. Press the confirm button, and a prompt indicating tire pressure storage will appear. The Mazda CX4 has a body length, width, and height of 4637mm, 1855mm, and 1524mm respectively, with a wheelbase of 2700mm, a fuel tank capacity of 45 liters, a minimum ground clearance of 206mm, and a body weight of 1493kg.
16
5
Share

Where is the production location of Lynk & Co?

Lynk & Co's production location is in Zhangjiakou. The models under Lynk & Co include: Lynk & Co 01, Lynk & Co 02, Lynk & Co 03, Lynk & Co 06, Lynk & Co Lite, Lynk & Co 07, etc. Taking the 2021 Pure Lite Lynk & Co as an example, its body dimensions are: 4639mm in length, 1840mm in width, 1472mm in height, with a wheelbase of 2730mm, a minimum ground clearance of 169mm, and a body weight of 1395kg. The 2021 Pure Lite Lynk & Co features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 69ps, a maximum power of 156kw, a maximum torque of 245nm, and is paired with a 6-speed manual transmission.
7
0
Share

What should be paid attention to when following a car?

When following a car, you should pay attention to: 1. The speed of the car in front: During driving, closely monitor the speed of the car in front and adjust the following distance in time; 2. The type of the car in front: When the car in front is a large bus or truck, and the following car is a small or mini car, the large vehicle ahead will block the view, making it impossible to judge the road conditions ahead, so a larger following distance is required; 3. Road conditions: Different roads have different braking distances. If the road surface has a small friction coefficient, the following distance should be increased; 4. Weather impact: When following a car in rain or snow, the slippery road surface will increase the unsafe braking zone, so the following distance should also be increased.
8
2
Share

How Long Does It Take to Fully Charge a Dead Car Battery?

A dead car battery typically requires about 20 hours to fully charge. Common causes of a dead car battery include: 1. Forgetting to turn off electrical appliances after leaving the vehicle; 2. The battery has reached the end of its lifespan, losing its ability to hold a charge or discharging quickly; 3. Insufficient battery electrolyte; 4. Internal battery faults leading to damage. Methods to charge a car battery: 1. Use the jump-start method to charge the battery; 2. Utilize a battery charger to recharge the battery. Steps for using the jump-start method to charge the battery: 1. Position the car with a charged battery next to the car with a dead battery, facing each other closely; 2. Open the hoods of both cars and prepare the charging clamps; 3. Locate the batteries in both vehicles, attach the negative clamps to the negative terminals of both batteries, and the positive clamps to the positive terminals; 4. Start the car with the charged battery, allow it to charge the dead battery for a few minutes, then attempt to start the car with the dead battery; 5. After the car starts, turn off the engine and disconnect the cables; 6. Close the hoods of both cars, then start the vehicle—the car will automatically begin charging the battery.
20
0
Share

Where is the air filter element located in the Sagitar?

The air filter element in the Sagitar is located inside the glove compartment on the passenger side. The removal method is as follows: 1. Open the glove compartment and remove any items inside; 2. Release the clips on both sides of the glove compartment and remove it; 3. Remove the cover of the air filter element; 4. Take out the old air filter element for replacement. The functions of the air filter element include: 1. Filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Maintaining clean air and preventing bacterial growth. Taking the 2021 Sagitar ZhiLian version as an example, its body dimensions are: 3564mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm.
7
3
Share

How to Activate Brake Assist?

Brake assist is automatically activated and does not require manual activation by the driver. It is enabled by default as soon as the vehicle starts. The brake assist system includes electronic brake assist and brake force assist systems, which can increase braking force during emergency braking by assessing the driver's braking action strength and speed, thereby reducing stopping distance. Functions of brake assist: 1. Prevents wheel lock-up when braking; 2. When the vehicle experiences wheel slip, rollover, or loss of tire traction, it reduces engine speed while applying braking control to the wheels to prevent dangers caused by loss of vehicle control.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.