What does NEDC mean for new energy vehicles?

1 Answers
KennedyDella
07/30/25 1:33am
About the relevant introduction of new energy NEDC is as follows:1. Introduction 1: NEDC stands for New European Driving Cycle, which means "New European Driving Cycle" in Chinese.2. Introduction 2: The current Ministry of Industry and Information Technology range standard used in China is the European standard. The NEDC range test mainly simulates urban and suburban environments, with a ratio of 4:1. Due to the many influencing factors in actual road conditions, NEDC tests are basically bench tests.3. Introduction 3: The biggest criticism of NEDC is that the data it theoretically produces can sometimes be far from reality, and the reference value of NEDC standards in most countries is not high.
Was this review help?
20
2
Share
More Forum Discussions

How far can a car go when the fuel gauge reaches the red line?

When the fuel gauge reaches the red line, the car can still travel 30 to 50 kilometers. The fuel gauge is used to indicate the amount of fuel remaining in the car's fuel tank. Its function is to immediately light up an alarm when the fuel in the tank falls below a specified level, reminding the driver to refuel promptly. Fuel gauges are categorized into pointer type and digital type based on their design. Below are the methods to read the fuel gauge: 1. When the illuminated bars reach the 'F' position, it indicates the tank is full; 2. The closer the illuminated bars are to the 'E' position, the less fuel remains, signaling the need for immediate refueling. The fuel gauge can be viewed on the central dashboard display screen of the instrument panel, and the data can be toggled using the buttons on the right-hand stalk of the steering wheel.
11
2
Share

What does the exclamation mark on the Lavida dashboard mean?

Lavida dashboard shows exclamation mark for the following reasons: 1. A yellow exclamation mark on the Lavida dashboard indicates tire pressure monitoring, meaning the tire pressure is abnormal. 2. A red exclamation mark means the handbrake is not fully released, while a yellow exclamation mark is caused by insufficient tire pressure. Precautions for Lavida car bulb damage are as follows: 1. Car light malfunctions are not limited to minor issues such as burnt-out bulbs, corroded sockets, or damaged plugs. Professional diagnostic techniques are often required to analyze the root cause of the malfunction. Even in low-priced cars, internal and external lights are controlled by the main computer. In luxury cars, the headlights alone are controlled by three computers. 2. If the car is equipped with a DRL (Daytime Running Light) system, it is essential to first understand how these devices work. Some DRL systems cannot be turned on before the engine starts, while others will not function properly if the parking brake has not been released, even if the engine is already running. 3. If the vehicle is equipped with light-controlled lights, it is advisable to check the operation of the lights as the photosensitivity changes from weakest to strongest. Also, do not overlook checking the automatic shut-off timer. If the system is equipped with a timer, set it to the maximum delay.
17
3
Share

Which side of the road do you drive on in the UK?

In the UK, vehicles drive on the left side of the road with the steering wheel on the right. Currently, there are two prevailing traffic systems worldwide: right-hand traffic and left-hand traffic. When Karl Benz first invented the automobile, the steering wheel was positioned in the center. However, based on ergonomic principles, over 90% of people are right-handed. To ensure accurate and safe operation of gear shifts and brakes, designers naturally placed the driver's seat on the right. Factors determining steering wheel position: The position of a car's steering wheel is determined by each country's traffic regulations and is unrelated to the type of vehicle. Automakers produce corresponding vehicles for different markets. If a country or region follows left-hand traffic, the steering wheel of vehicles sold there will be on the right; if a country or region follows right-hand traffic, the steering wheel will be on the left. Asian countries and regions with right-hand drive vehicles: Bangladesh, Bhutan, Brunei, India, Indonesia, Japan, Malaysia, Maldives, Nepal, Pakistan, Singapore, Sri Lanka, Thailand, Hong Kong (China), Macau (China).
18
0
Share

Where is the headlight height adjustment located on the eighth-generation Camry?

The headlight height adjustment button for the eighth-generation Camry is located on the car's dashboard. Here is the method for adjusting the headlight height on the Camry: 1. Position 0 is the initial position, generally when there is only the driver or the driver plus one front passenger in the car; 2. Position 1 is when all seats are occupied and there is no cargo in the trunk; 3. Position 2 is when all seats are occupied and the cargo in the trunk is evenly distributed; 4. Position 3 is when there is only the driver and the cargo in the trunk is evenly distributed. This method may not be applicable to all models, as some vehicles have five headlight height adjustment positions, so adjustments should be made according to the actual situation.
2
4
Share

Where is the air conditioning filter installed in the Trumpchi GS8?

The air conditioning filter of the Trumpchi GS8 is located inside the glove box in front of the passenger seat. When removing the air conditioning filter, the process involves disassembling relatively complex components, including the glove box, decorative panels, and the removal of over a dozen screws. The steps to replace the air conditioning filter of the Trumpchi GS8 are as follows: 1. Open the glove box in front of the passenger seat and clear out any items inside. 2. Remove the three plastic fasteners on the lower panel of the glove box. 3. After removing the plastic fasteners, you can take off the plastic panel of the glove box. 4. Once the plastic panel is removed, proceed to unscrew the internal screws. 5. After removing the screws from the glove box, pull the decorative strip above the glove box outward and then remove the four screws inside the strip. 6. After removing the screws inside the decorative strip, also remove the screw near the passenger door on the side of the glove box. 7. Once all screws are removed, take off the glove box to reveal the air conditioning filter housing. 8. Press the plastic fastener on the air conditioning filter housing and then remove the housing. 9. After removing the housing, replace it with a new air conditioning filter and then reassemble the glove box by reversing the disassembly steps. This completes the entire process of replacing the air conditioning filter in the Trumpchi GS8.
1
4
Share

What to Do When a Car Won't Start After Sitting for a Long Time?

When a car won't start after being parked for an extended period, the primary cause is usually a dead battery. There are three methods to address this issue: the first is jump-starting, which involves borrowing power from another functioning vehicle; the second is push-starting, the most familiar and effective emergency method; and the third is using an external force to tow-start the car. Expanded Explanation: 1. Jump-Starting Method. First, you need two jumper cables and a functioning vehicle. Second, the two cars should not be parked too far apart, as jumper cables are typically no longer than two meters. Ensure the functioning vehicle is running, as the voltage output is most stable in this state. Then, locate the batteries in both cars and identify the positive and negative terminals. The standard procedure is to first connect the positive terminals of both cars with the red cable, followed by connecting the negative terminals with the black cable. 2. Push-Starting Method. This is the most familiar and effective emergency method, but it should only be used as a last resort, as it can cause some damage to the car's engine and clutch. Note that this method is only applicable to manual transmission vehicles and must never be used on automatic transmission vehicles. 3. Towing to Start Method. If the car battery is dead and cannot start, and there happens to be another vehicle nearby that can assist with towing, this method can be used. First, prepare a sturdy tow rope and securely fasten it to the front and rear of both vehicles. Then, begin the towing process to start the car. Ensure a slow and steady start to maintain safe speeds for both vehicles and prioritize road safety.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.