What does MT mean for vehicles?

What Transmission Does the Trumpchi GS5 Use?

Trumpchi GS5's transmission is manufactured by Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the top global market share in this field. The GAC Trumpchi GS5 offers two transmission options: manual and automatic. It comes with either a 6-speed manual transmission or a 6-speed automatic transmission, depending on the model variant. A manual transmission is a gear-shifting device that alters the engine's speed and torque delivered to the drive wheels, enabling the vehicle to achieve varying traction and speed under different driving conditions such as starting from standstill, climbing hills, cornering, and accelerating. The manual-automatic transmission is essentially a traditional AT or CVT transmission with added manual shifting functionality, designed to enhance the driving pleasure of automatic transmission vehicles. For the Trumpchi GS5's transmission, the following maintenance tips should be noted during daily use: Do not prolong transmission fluid changes. Extended intervals without fluid replacement can damage internal components like bearings and housing; Avoid prolonged coasting in neutral. While manual transmission drivers often coast in neutral, doing so with an automatic can cause overheating and jerking when re-engaging D gear; Never shift into D/R before coming to a complete stop. Some drivers shift prematurely to demonstrate smooth operation, but this severely stresses transmission gears and may lead to gear grinding over time; Refrain from frequent steep hill climbs in D gear. Automatic vehicles may overheat under heavy load or upshift prematurely, losing climbing power. Use manual mode's low gears or sport mode instead; Avoid long-distance towing. For faulty automatic vehicles, use flatbed towing with the transmission in N gear rather than tow ropes, which force the drivetrain to operate.

2

3

Share

What Does U-Turn Mean?

U-turn refers to making the vehicle turn left or right to the rear and proceed, causing the vehicle to move in the opposite direction of the adjacent lane. Permissible situations for making a U-turn are as follows: Presence of U-turn traffic lights or signs: When there is a U-turn traffic light at an intersection, a U-turn can be made when the U-turn indicator is green. If there is a U-turn sign at the intersection or a U-turn indicator on the lane, a U-turn can be made while ensuring the safety of oneself and others. No U-turn sign but left turns are allowed (no prohibition of U-turn signs or markings): Vehicles can make a U-turn at intersections where left turns are permitted and no U-turn prohibition signs or markings are present. It is important to note that the vehicle must proceed according to the left-turn lane traffic signal without affecting the normal movement of other vehicles. If making a U-turn at an intersection with a left-turn waiting area, the vehicle can enter the left-turn waiting area when the straight signal is green and wait until the left-turn signal turns green before making the U-turn. U-turns are allowed at dashed lines: Whether it is a white or yellow dashed line, U-turns are permitted. In the case of double yellow lines (one solid and one dashed), check if the side you are on is dashed. If it is dashed, a U-turn can be made safely. If it is solid, a U-turn is not allowed. If encountering double yellow lines at an intersection, a U-turn can be made on the dashed side, but the vehicle must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid line areas, but as long as there is no central barrier, a U-turn can be made here after yielding to normally moving vehicles. U-turns can be made on the dashed side of a green belt: When the front of the green belt is a dashed line, vehicles on that side can make a U-turn from this point. When the front of the green belt is a solid line, vehicles must follow the traffic signal, cross the pedestrian crossing before making a U-turn, and are prohibited from crossing the solid line or the pedestrian crossing to make a U-turn. Precautions for making a U-turn: When making a U-turn, the left turn signal should be activated in advance, the maximum speed should not exceed 30 kilometers per hour, and the maneuver should not obstruct other normally moving vehicles or pedestrians.

18

5

Share

How to Deal with Overheating Car Coolant Temperature?

Methods to handle overheating car coolant temperature: Immediately pull over to the side of the road. You can slightly loosen the radiator cap to allow steam to slowly escape. After the radiator pressure decreases, add cold water or coolant. To prevent the water temperature from getting too high, regularly clean the car's cooling system and check the coolant level in the radiator. When adding coolant, be careful not to mix different brands. The full name of car coolant is antifreeze coolant, meaning it has antifreeze properties to prevent the coolant from freezing in cold weather, which could crack the radiator or damage the engine cylinder block.

5

1

Share

What Causes High Water Temperature in Jinbei Haice?

This situation is mostly caused by a faulty thermostat. Below is relevant information about the Jinbei Haice: 1. Model Introduction: As a 17-year technological collaboration model with Toyota, Jinbei Haice is the only domestic Haice series product manufactured using Toyota technology, molds, and management methods. 2. Development Scale: Currently, it has five major series with nearly twenty variants, catering to diverse consumer demands. Its production and sales have ranked first in China's light passenger vehicle market share for 12 consecutive years. In the 8 to 14-seat commercial vehicle segment, Jinbei Haice holds nearly 60% market share with over 700,000 units in circulation.

14

5

Share

How to Deal with Engine Overheating?

Engine overheating can be addressed through the following steps: 1. Open the radiator cap, start the engine, and observe if there is any water circulation in the radiator; 2. Remove the thermostat and inspect it; 3. Check if the radiator surface is clogged; 4. Examine the fan belt to ensure its tension is normal. The causes of engine overheating include: 1. Inoperative fan motor or faulty fan clutch; 2. Blocked catalytic converter or ruptured pipes; 3. Cracked pipes in the cooling system; 4. Worn-out parts due to prolonged use of the water pump; 5. Unstable pressure in the radiator cap leading to loose springs and improper sealing.

18

3

Share

Which country is the Carlsson car brand from?

Carlsson is a German car brand. Here is the relevant introduction about Carlsson cars: 1. Design Philosophy: Treating the design of luxury cars with the same meticulous craftsmanship as artworks, Carlsson officially appointed Rolf Schepp, a master in the global automotive design industry, as its chief designer in 2009, dedicated to pushing Carlsson's design to the pinnacle of fashion aesthetics. The bronze sculpture of horses, symbolizing the spirit of Carlsson, will be displayed in showrooms or 4S stores in every region of China. 2. Brand Positioning: Carlsson boasts the purest German heritage, committed to professionally designing and manufacturing high-end vehicles, thereby creating the strong aristocratic brand characteristics of Carlsson cars.

8

1

Share

What does MT mean for vehicles?

What Transmission Does the Trumpchi GS5 Use?

What Does U-Turn Mean?

How to Deal with Overheating Car Coolant Temperature?

What Causes High Water Temperature in Jinbei Haice?

How to Deal with Engine Overheating?

Which country is the Carlsson car brand from?

Where in Shandong does the license plate 'Lu V' belong to?

How often should the spark plugs be replaced in the SAIC Volkswagen Lavida XR?

Can I Choose Not to Use ETC After Applying for It?

Can the Chang'an Star car run normally if the generator is not generating electricity?