What does Mercedes-Benz 4MATIC mean?

What are the reasons for frequent ABS intervention during low-speed braking?

The reasons for ABS misintervention during low-speed braking are as follows: Reason 1: The sensing part of the ABS speed sensor is covered by mud, sludge, or other contaminants, affecting the sensor's ability to detect the corresponding vehicle speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt on the speed sensor and adjust the gap between the speed sensor and the signal gear ring to restore normal function. Reason 2: Poor signal quality due to loose connections between system lines or poor contact of the ABS relay can cause system malfunctions. The most common issue is a loose speed sensor connector, which leads to faults. In such cases, the ABS computer's fault memory will also display a poor speed sensor signal. Solution: Check the line connections and reconnect any loose parts.

5

3

Share

Do I need to pay a retake fee if I fail the Subject 4 test?

No, you don't need to pay a retake fee if you fail the Subject 4 test. Subject 4 is the theoretical exam on road traffic safety and civilized knowledge, which is part of Subject 3. After passing the Subject 3 test, you can take the Subject 4 test immediately. If you fail the Subject 4 test, no retake fee is required, and there is no limit to the number of attempts. However, you must wait at least 10 days before rescheduling the test after each failure. The test results are valid as long as you pass within the three-year validity period. Additional information: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. The test consists of 50 questions, primarily in the form of case studies, images, and animations. The maximum score is 100, and a score of 90 or above is required to pass.

15

4

Share

What are the reasons for the start-stop system error in Dongfeng Nissan?

The reasons for the start-stop system error in Dongfeng Nissan are: 1. Accidentally turning off the start-stop system switch; 2. The start-stop system requires certain conditions to work, common ones include stepping on the brake, stepping on the clutch, pulling the handbrake, and some more specific ones like fastening the seatbelt and closing the car door. If these conditions are not met, the system will not work; 3. Insufficient battery power, excessive steering wheel angle when parking, low engine coolant temperature, or throttle valve failure. Taking the Sylphy 2021 Classic 1.6XL Manual Luxury Edition as an example: It is a compact car under Dongfeng Nissan, equipped with a 1.6L engine and a 5-speed manual transmission. The body type is a 4-door, 5-seater sedan, with MacPherson independent front suspension and torsion beam non-independent rear suspension, and the drive method is front-wheel drive.

10

0

Share

What is the appropriate tire pressure for the front tires of a sedan?

The tire pressure for the front tires of a sedan is generally around 2.3 bar. Under normal circumstances, the front tire pressure is higher than the rear tire pressure. This is because the front of the vehicle is equipped with an engine, while the rear, unless frequently loaded with items, tends to be lighter than the front, resulting in higher front tire pressure compared to the rear. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; The maximum pressure should not exceed 3.5 bar. Hazards of overinflated tires: Reduced friction and grip, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, leading to internal cracks, blowouts, or even tire bursts.

19

0

Share

How to Quickly Eliminate Odors Inside the Car?

Here are methods to quickly eliminate odors inside the car: 1. Ventilation and Sun Exposure: The first step is to ventilate the car. On sunny days, park the car in a dry and well-ventilated area for sun exposure, which can effectively remove odors. Avoid parking in damp places for extended periods, as this can lead to musty smells and negatively impact the car's lifespan. 2. Grapefruit or Orange Peels: Placing grapefruit or orange peels inside the car can help eliminate odors and freshen the air. These fruit peels have strong odor-absorbing properties, not only releasing a refreshing fragrance but also absorbing unpleasant smells, creating a pleasant atmosphere. 3. Activated Charcoal Bags: Activated charcoal is highly effective at absorbing odors, including formaldehyde and other unpleasant smells. Therefore, placing activated charcoal bags in the car is an excellent way to eliminate odors. 4. Vinegar: Acetic acid in vinegar can neutralize formaldehyde and other odors inside the car, helping to remove harmful substances. When the car is not in use, mix vinegar with water in a spray bottle. Spray it on the seats and doors, then wipe with a cloth.

15

0

Share

What are the consequences of mixing Sinopec and PetroChina gasoline?

Gasoline from different gas stations and brands can be mixed as long as they have the same octane rating. If the octane ratings are different, even gasoline from the same brand should not be mixed, as this can lead to abnormal combustion and engine knocking. Knocking not only damages the combustion chamber but also directly affects the normal operation of the engine, potentially causing severe engine damage in serious cases. To determine the appropriate gasoline grade for your car, refer to the vehicle's user manual or check the fuel grade marked on the fuel tank cap. Solutions for adding the wrong gasoline: If you add gasoline with a higher octane rating than specified for your car (e.g., adding 95 octane when 92 octane is required), simply switch back to 92 octane after consuming the current fuel. If you add gasoline with a lower octane rating than specified (e.g., adding 92 octane when 95 octane is required), you can add a high anti-knock fuel additive. Alternatively, you can drain the fuel and refill with 95 octane gasoline.

4

0

Share

What does Mercedes-Benz 4MATIC mean?

What are the reasons for frequent ABS intervention during low-speed braking?

Do I need to pay a retake fee if I fail the Subject 4 test?

What are the reasons for the start-stop system error in Dongfeng Nissan?

What is the appropriate tire pressure for the front tires of a sedan?

How to Quickly Eliminate Odors Inside the Car?

What are the consequences of mixing Sinopec and PetroChina gasoline?

What are the reasons for the failure of the Lavida sunroof switch?

What Kind of Driver's License is Required to Drive a 13-Seater Vehicle?

What are the reasons for the failure of the protection system in a Mercedes-Benz?

Can Automatic Transmission Cars Drift?