What does menu mean in a car?

1 Answers
McJaxon
07/29/25 12:03pm
Car's menu means the following: 1. Menu means "menu", which is a list of contents. 2. The functions of the menu button vary from car to car. Some models do not have a menu button, but a SET button instead. 3. Generally, clicking the menu button will list all the settings in the current mode on the car system for the driver to set. Here is an introduction to the functions of menu: 1. If the mode is on the multifunction steering wheel, it is basically a button to control the switching of car multimedia, used to switch between FM radio, AM radio, CD or USB modes. 2. If the mode button is in the air conditioning control area of the center console, it is used to switch the air outlet mode of the car air conditioner, generally switching between foot blowing, head blowing and windshield blowing modes.
Was this review help?
15
0
Share
More Forum Discussions

Is Clutch Pedal Vibration a Normal Phenomenon?

Clutch pedal vibration is not a normal phenomenon. Common causes include severe carbon buildup and unstable fuel concentration. Specific reasons and countermeasures are as follows: Severe Carbon Buildup: Excessive carbon deposits in the engine cylinders can lead to spark plug and valve blockages, directly causing the car to shake during idle. If the car's acceleration performance has significantly declined and the shaking is persistent, it is necessary to clean the engine cylinders. Fuel additives can be used to remove carbon deposits by adding them to the fuel tank. During engine operation, the fuel additive travels with the fuel through the fuel line into the intake manifold (except for direct injection engines), intake valves, fuel injectors, and combustion chamber. Through contact with these components, it dissolves and cleans carbon deposits, sludge, and other contaminants from their surfaces. Unstable Concentration: Fuel system issues causing unstable fuel pressure can lead to inconsistent air-fuel mixture concentration, resulting not only in shaking but also unstable idle. In this case, the fuel filter should be replaced, as prolonged use can cause the filter element to become clogged.
7
3
Share

Where is the USB port in the Roewe 550?

The USB port in the Roewe 550 is located inside the small drawer beneath the headlight knob on the driver's left side, which includes both a USB port and an AUX port. The fuse box of the Roewe 550 is situated below the glove compartment. The decorative panel under the glove compartment is secured by screws and plastic clips. Remove the screws, release the clips, and take off the panel to access the fuse box. Taking the 2014 manual Zhixuan edition Roewe 550 as an example, its body dimensions are: length 4648mm, width 1827mm, height 1483mm, with a wheelbase of 2750mm. The 2014 manual Zhixuan edition Roewe 550 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 133PS, maximum power of 98kW, maximum torque of 170Nm, paired with a 5-speed manual transmission.
3
2
Share

How to reset the maintenance reminder for the 2016 Focus?

The method to reset the maintenance reminder for the 2016 Focus is: Press the vehicle's one-touch start button to start the engine, then continuously press the 'set' button on the left side of the multifunction steering wheel until you hear a beep sound. Next, press the 'OK' button on the right side of the multifunction steering wheel to cancel the maintenance light reminder. Taking the 2020 Focus as an example, it belongs to the compact car category with the following dimensions: length 4378mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53L, and curb weight 1242kg. The 2020 Ford Focus features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5T turbocharged engine delivering a maximum horsepower of 122PS, maximum power of 90kW, and maximum torque of 153Nm, paired with a 6-speed manual transmission.
13
5
Share

What causes the beeping sound in a Sylphy when there is no warning light on the dashboard?

Sylphy beeping sound without any warning light on the dashboard is usually caused by the handbrake not being fully released or the seatbelt not being fastened properly. Below are the specific details about the Sylphy: 1. Vehicle Positioning: The Sylphy is a mid-size sedan under Dongfeng Motor Co., Ltd., with dimensions of 4641mm (L) × 1815mm (W) × 1450mm (H). 2. Powertrain: Equipped with a 1.6L naturally aspirated engine compliant with China VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox. 3. Smart Features: Features the new Nissan-Connect super-intelligent system, including an 8-inch HD capacitive touchscreen with functions like voice control and remote vehicle control. Voice control enables basic operations of the vehicle's online entertainment system, real-time navigation, Bluetooth calls, dashcam, and air conditioning through simple voice commands. The remote monitoring and control function allows seamless connectivity with smartphones via a dedicated app, enabling remote control of door locks, light & horn flashing, engine, and air conditioning based on specific needs.
13
0
Share

What Problems May Occur After Replacing the Rear Windshield?

After replacing the rear windshield of a car, the following problems may occur: air leakage, water leakage during rain, and noise while driving. Reasons for these problems: Improper installation, where the adhesive on both sides of the windshield does not tightly bond with the glass. During high-speed driving, gaps between the windshield and the car body can cause air leakage, leading to increased interior noise. Additionally, when driving on bumpy roads, unusual sounds of shaking and impact may be felt. Precautions after replacing the rear windshield: 1. Do not wash the car within three days after replacing the windshield. Remove the tape securing the windshield position only after three days. 2. Try to avoid driving on excessively bumpy roads and refrain from sudden braking or rapid acceleration to prevent the windshield from shifting. 3. Avoid high-speed driving and keep the maximum speed below 80 km/h. 4. Do not apply window tint within seven days. 5. Do not open the windows while driving within three days after replacing the rear windshield to prevent the windshield from shifting due to wind pressure.
16
4
Share

What should drivers pay attention to when driving in the rain?

Rainy days are prone to traffic accidents because rain reduces driver visibility and decreases friction between tires and the road, making accidents more likely. Precautions for driving in the rain: Maintain good visibility: Besides driving cautiously, promptly turn on the windshield wipers and use lights, air conditioning defogging, and other functions appropriately. Lights not only provide illumination but also signal your position to other vehicles. With low visibility in the rain, turning on lights promptly can significantly reduce accident rates. However, avoid using high beams in heavy rain as the reflection can impair visibility. Prevent tire skidding: Wet roads increase the risk of tire skidding. When turning, avoid sudden braking—reduce speed in a straight line before entering the curve. In emergencies requiring sudden braking, stay calm: either steer to avoid obstacles or brake in a straight line. Avoid braking while swerving, as this is ineffective. Drive slowly: Regardless of road width or conditions, reduce speed in the rain and constantly monitor the distance between your vehicle and others. Be mentally prepared to take emergency actions. Low visibility and reduced braking performance in the rain necessitate early deceleration to allow ample time and space for safe maneuvering. Reduce fogging: Sudden rain can lower the windshield temperature, causing interior moisture to condense into fog and obstruct vision. In such cases, use the air conditioning defogger. Master water navigation: Exercise caution on flooded roads, typically driving straight at low speed without stopping. If water levels exceed the exhaust pipe, detour. Maintain safe following distance: Avoid tailgating large vehicles, as they can block your view and may traverse water depths unsafe for smaller cars. Large vehicles also create splashes that can affect smaller vehicles. Watch for pedestrians: Umbrellas and rain gear limit pedestrians' and cyclists' visibility, hearing, and reaction times. They may cross suddenly or panic when vehicles approach, leading to slips. In such situations, slow down, yield patiently, and stop at a safe spot if necessary. Never rush or compete with pedestrians and cyclists.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.