What does MEM on the car steering wheel mean?

Where is the cabin air filter located in the Nissan Qashqai?

The cabin air filter of the Nissan Qashqai is located under the driver's position, inside the black interior trim panel next to the right foot accelerator pedal. More information about the Nissan Qashqai is as follows: 1. The new Nissan Qashqai is equipped with a 2.0L inline four-cylinder naturally aspirated engine, with the maximum power increased by 3KW compared to the current model, and the fuel consumption per 100 kilometers is only 6.0L, which is 13% lower than the old model, and it supports the China VI B emission standard. 2. The exterior adopts Nissan's new V-Motion design language, with a new-style 'V' grille on the front face, complemented by chrome decoration, and the headlights on both sides are redesigned, with a slender shape and lenses added inside. 3. The new Qashqai is equipped with a new-style steering wheel and a 9-inch high-definition capacitive touch screen, and it comes with the Connect Nissan Intelligent System, providing the vehicle with intelligent voice control, 24-hour entertainment, full-time navigation, remote real-time monitoring and other interconnection technologies, realizing intelligent human-vehicle interaction in more than 200 scenarios.

18

3

Share

Is Cruise Control Useful for Manual Transmission?

Manual transmission cruise control is useful. When the vehicle reaches the desired speed, pressing the cruise control button allows the car to maintain that speed without the need to press the accelerator. To exit cruise control, simply lightly press the brake pedal. The cruise control system, abbreviated as CCS, is also known as a speed control device or autonomous driving system. Its function is to maintain the vehicle's speed as set by the driver without requiring continuous accelerator input, allowing the car to travel at a constant speed. Using this system on long highway drives reduces driver fatigue by eliminating the need to control the accelerator pedal constantly. It also minimizes unnecessary speed variations, which can help save fuel.

17

5

Share

What does CTV mean?

CTV stands for Continuously Variable Transmission, also known as a CVT. In a CTV transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the smaller pulley, which drives the larger pulley through the steel belt. Theoretically, a CTV transmission system can have an unlimited number of gears, offering greater flexibility in gear settings. It is easier to achieve the balance between gear ratio, speed ratio, performance, fuel consumption, and exhaust emissions compared to traditional transmission systems. The mechanical efficiency and fuel economy of a CTV transmission are significantly better than those of a conventional automatic transmission, second only to manual transmissions, and offer much better fuel efficiency.

10

3

Share

Should You Shift Gear or Release the Handbrake First When Starting the Car?

You should shift into gear first and then release the handbrake when starting the car. The primary reason for this sequence is safety. Once the gear is engaged, the power transmission path in the gearbox is connected. When you first shift into gear, the transmission is in first gear, which provides the highest torque. If the brake is not properly applied, the car might suddenly lurch forward. After shifting into gear, you should promptly release the handbrake to start moving. Automatic transmissions can be categorized into CVT, AT, and dual-clutch types. Both CVT and AT transmissions use a torque converter to transfer engine power to the gearbox, while dual-clutch transmissions transmit power through friction plates similar to manual transmissions.

5

0

Share

What does rear mean inside the car?

Inside the car, rear refers to the rear windshield defogging function. Pressing the rear button removes fog from the rear windshield. The rear windshield defogging function mainly works on the principle of heating with resistance wires. Typically, the rear defogger switch turns off automatically after about ten minutes. The rear windshield has heating wires, which are visible as thin copper lines. Pressing the rear button activates these heating wires to defog the rear windshield. The rear defogger switch usually turns off automatically after about ten minutes to protect the heating wires. If the defogging effect is unsatisfactory after activating the rear defogger, it might be due to aging from prolonged use.

2

Share

Where to Add Windshield Washer Fluid for the 10th Generation Civic?

The windshield washer fluid reservoir for the 10th Generation Civic is located in the engine compartment. After opening the engine hood, you can find it slightly behind the hood support arm, marked by a blue cap. Windshield washer fluid, also known as wiper fluid, is a super-concentrated cleaning agent for car glass, featuring properties such as non-stickiness, anti-static, anti-corrosion, dustproof, cold resistance, acid rain resistance, antifreeze, and UV protection. The 10th Generation Civic adopts a family-style design, aligning with its sporty coupe positioning. The overall design leans towards a sporty aesthetic, with the front grille's bold chrome trim receiving a smoked treatment, and the through-type decorative panel enhancing its dynamic appearance.

15

4

Share

What does MEM on the car steering wheel mean?

Where is the cabin air filter located in the Nissan Qashqai?

Is Cruise Control Useful for Manual Transmission?

What does CTV mean?

Should You Shift Gear or Release the Handbrake First When Starting the Car?

What does rear mean inside the car?

Where to Add Windshield Washer Fluid for the 10th Generation Civic?

How to reset the maintenance wrench light on the 2020 CR-V?

How to reset the tire pressure warning on the Sagitar?

Does the Dongfeng Honda Accord meet the China VI emission standard?

Is the Skoda Kamiq a four-wheel drive?