What does LT mean on the back of a tire?

What does a 3-lock off-road vehicle mean?

A 3-lock off-road vehicle refers to a car equipped with three differential locks: front axle differential lock, center differential lock, and rear axle differential lock. Having these three differential locks indicates that the vehicle possesses strong off-road performance and robust off-road hardware. Below is an introduction to off-road vehicles: 1. Definition: An off-road vehicle is specifically designed for off-road use, primarily referring to vehicles capable of traversing rough terrain. 2. Features: Its main characteristics include a ladder-frame chassis, four-wheel drive, high ground clearance, tires with excellent traction, elevated exhaust pipes, high horsepower, and sturdy bumpers.

4

1

Share

Do I Need to Change Back If the Tire Is Mounted Backwards?

Tires mounted backwards need to be corrected, and during installation, the tire's specified mounting direction should be strictly followed. Here are the specific reasons: 1. Tire tread design: The tread pattern and its orientation have a directional design, which plays a crucial role in water drainage and anti-slip performance during normal driving. 2. Reversed mounting affects braking: Mounting tires backwards reduces the vehicle's grip, causes uneven resistance on both sides, thereby affecting braking performance, accelerates tire wear, and may lead to vehicle deviation and unstable steering.

13

5

Share

What does 100V on tires mean?

The marking 100V on tires refers to two parameters of the tire: load capacity and speed. 100 is the load index of the tire, meaning the maximum load capacity at the rated speed is 800KG. V represents the speed rating, indicating the maximum speed the tire can support, with V corresponding to a speed of 240KM/H. Here are some related explanations: 1. The meaning of 100V: The 100 on car tires refers to the maximum load capacity of the tire, while V stands for 240 kilometers per hour. 2. The dangers of exceeding 100: If the load on the car tire exceeds 100, it means the service life of the tire will be greatly shortened. In severe cases, it can pose significant safety hazards to the owner and may cause unavoidable harm to both the owner and pedestrians on the road.

18

2

Share

What Do Maximum Power and Maximum Torque Mean?

Maximum power refers to the maximum power output that an engine can achieve, measured in kilowatts (kW) or horsepower (Ps). Maximum torque is also an important parameter of engine performance, representing the average moment of force output from the crankshaft during engine operation, measured in Newton-meters (N·m). Below are the relevant details: 1. Power and torque are indicators of a car's performance: Power and torque are crucial data for a car's engine and serve as the primary basis for evaluating a vehicle's performance. Among them, maximum power determines the car's top speed and mid-to-late-stage acceleration capability, while maximum torque determines the car's initial acceleration time and burst power. 2. Maximum power: Maximum power refers to the maximum power output that an engine can achieve, measured in kilowatts (kW) or horsepower (Ps). As the engine speed increases, the engine's power also increases accordingly. When a certain speed is reached, the power will no longer increase, so the corresponding engine speed (rpm) is also noted when specifying the maximum power. 3. Engine maximum power is directly related to speed: Initially, the power increases with the rise in speed. However, once the output reaches its maximum, the power will decrease as the speed continues to increase. Different engines have different maximum power speeds, with typical gasoline engines reaching maximum power at 5000-8000 rpm, while diesel engines achieve it at 3000-5000 rpm. 4. Maximum torque: Maximum torque is also an important parameter of engine performance, representing the average moment of force output from the crankshaft during engine operation, measured in Newton-meters (N·m). The magnitude of torque is directly related to engine speed. The greater the torque, the more power the engine outputs, and the faster the crankshaft speed changes, resulting in better climbing ability, initial acceleration, and overall acceleration performance of the car. 5. Maximum torque is related to the intake system: The maximum torque of an engine is influenced by the design of the intake system, fuel supply system, and ignition system. At a certain speed, when these systems achieve optimal performance matching, the maximum torque is reached. Additionally, the speed at which maximum torque occurs depends on the design of the engine's valve timing and bore-to-stroke ratio. Generally, turbocharged engines use a DOHC (Double Overhead Camshaft) design to compensate for low-speed torque issues, balancing high-speed performance with low-speed, high-torque characteristics.

10

1

Share

What does autonomous driving L2 level mean?

Autonomous driving L2 level is classified as semi-autonomous driving, which enables the vehicle to operate multiple functions while requiring the driver to control a few functions. Below are two essential systems that autonomous driving L2 level must have: 1. Adaptive Cruise Control System: Also known as ACC adaptive cruise control system, the latest commercial version is the third-generation ACC adaptive cruise control system. It uses front radar sensors to collect signals and automatically follows the preceding vehicle for acceleration and deceleration. It also features the Stop-Go function, making it not only suitable for highway conditions but also ideal for urban driving. The AEB (Automatic Emergency Braking) system assists in braking when the distance to the preceding vehicle or pedestrian is less than the safe distance, helping to prevent collisions. 2. Lane Keeping System: During turns, the vehicle can easily deviate from its lane due to inaccurate steering by the driver, especially for novice drivers who have just obtained their licenses. Once the vehicle enters the opposite lane during a turn, it can be very dangerous.

2

3

Share

What are the effects of shock absorber oil leakage?

Shock absorber oil leakage at the initial stage will not cause significant impact, as the leakage rate is relatively slow. However, over time, the lack of oil will result in the shock absorber losing its damping function. When driving, the vehicle will experience noticeable shaking and bumping (body roll), and when encountering potholes, the wheels may produce a "bang" collision sound, causing considerable damage to the vehicle's suspension. When shock absorber oil leakage occurs, it should be addressed as soon as possible. Below is relevant information: 1. The role of shock absorbers: As the most critical component in a vehicle's vibration filtering system, shock absorbers primarily absorb vibrations and impacts caused by uneven road surfaces during driving, thereby providing a comfortable driving and riding environment for vehicle occupants. 2. The hazards of damaged shock absorbers: Once a shock absorber is damaged, it will greatly affect the driving comfort of the vehicle, and in severe cases, it may even pose a safety hazard. 3. Whether to replace a leaking shock absorber: Regarding whether a leaking car shock absorber can be left unreplaced, the key factor is the severity of the leakage. If it's only a minor seepage, replacement may not be necessary; however, if the shock absorber is leaking severely, it should be replaced promptly.

5

3

Share

What does LT mean on the back of a tire?

What does a 3-lock off-road vehicle mean?

Do I Need to Change Back If the Tire Is Mounted Backwards?

What does 100V on tires mean?

What Do Maximum Power and Maximum Torque Mean?

What does autonomous driving L2 level mean?

What are the effects of shock absorber oil leakage?

Why does the Wuling Hongguang mini make abnormal noises when running?

What is the name of the shield above the tire?

What does the yellow light 'off' on the car dashboard mean?

Can 95 and 98 Octane Gasoline Be Mixed?