What does 'Low Tire Pressure, Please Inflate' mean?

1 Answers
AlejandroLee
07/30/25 8:06am
'Low Tire Pressure, Please Inflate' means that the car's tire pressure monitor has detected that the tire pressure is below a certain value and requires inflation. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to deviations, which are unfavorable for driving safety; Increases the movement of various parts of the tire, leading to abnormal heating due to excessive rolling; Reduces the functionality of the cord and rubber, causing delamination or cord breakage, and excessive friction with the rim, resulting in damage to the bead area and abnormal wear; The friction between the tire and the ground increases exponentially, causing a sharp rise in tire temperature, softening of the tire, and a rapid decrease in strength. High-speed driving may lead to tire blowouts; Increases tire body deformation, leading to cracks on the tire side and causing flexing motion, resulting in excessive heat, promoting rubber aging, fatigue of the cord layer, cord breakage, and also increasing the tire's contact area with the ground, accelerating shoulder wear.
Was this review help?
7
3
Share
More Forum Discussions

How to Deactivate the Silent Mode on A3?

First, locate the volume adjustment knob in the center console of the vehicle as shown in the illustration. Rotate the knob to the right to adjust it to the maximum volume. Then, press and hold the voice control button on the right side of the multifunction steering wheel for five seconds. After that, press the vehicle's one-touch start button.
2
1
Share

Which company manufactures the Bestune T77 engine?

The engine of the Bestune T77 is independently developed by China's FAW Group under the Bestune brand, making it a domestically produced engine. The engine model used in the Bestune T77 is CA4GB15TD-30, with a maximum horsepower of 169 HP, a maximum power output of 124 kW at 5500 rpm, and a peak torque of 258 N·m. For daily maintenance of the Bestune T77 engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB-CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly replace the engine oil and oil filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically according to usage conditions and maintain the oil at an appropriate level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger quantities precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
9
0
Share

What to do if points are deducted during the probationary period of a B2 driver's license?

Bring your driver's license and vehicle registration to the vehicle management office to print out the official fine receipt. If it's a violation that involves point deduction, the points will be recorded when the fine receipt is printed. If a B2 driver's license has points deducted within a scoring cycle, the holder must undergo a review at the end of the cycle. No review is required if no points are deducted.
3
5
Share

How to Replace the Armrest Leather on a CR-V?

After opening it, identify the type of clips and use a plastic panel to safely remove them—it's unlikely to cause damage. Before applying glue, align the armrest leather properly and mark the position with a pen. Once the glue is applied, the leather cannot be moved unless you reapply the glue.
11
2
Share

What is the solution for the shadow of H7 xenon headlights?

Take out the bulb, carefully bend the electrode wire on the ceramic tube to one side by about 20 degrees, being cautious not to break it. Based on the original locking position of the bulb holder, cut another locking position on the opposite side to allow the ceramic tube of the bulb to face another direction.
12
3
Share

How to reset the 'engine oil change due soon' message on CRV?

First press the engine start-stop button to start the vehicle engine. The dashboard will then display the 'engine oil change due soon' message. Next, press the trip computer control button on the left side of the multifunction steering wheel, then press the CANCEL button on the right side of the multifunction steering wheel.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.