What does LO mean on the air conditioner?

1 Answers
SanBriella
07/29/25 9:29pm
LO stands for "Low". On some air conditioners, you may also see indicators like Hi and Me, which mean High and Medium respectively. These three commonly represent the fan speed levels or the temperature settings. In cars, when LO appears while adjusting the air conditioner temperature, it indicates that the air conditioner has reached its lowest temperature. Precautions for using car air conditioners: 1. Clean the air conditioner regularly: The air conditioner should be cleaned periodically. During use, the air conditioner tends to accumulate dust, which can form dirt and eventually lead to mold growth over time. 2. Avoid setting the temperature too low: If the indoor temperature remains too low for an extended period, the body may not adapt quickly enough, leading to various discomforts. Normally, the temperature inside the car should be set to around 26~27 degrees Celsius. 3. Do not rest in the car with the air conditioner running while parked: When the car engine is running, incomplete combustion of gasoline in the cylinders can produce high concentrations of carbon monoxide, leading to poisoning or even death.
Was this review help?
15
3
Share
More Forum Discussions

What is the tire model of the Teana?

Teana tires come in two sizes: 16-inch and 17-inch. Below are the relevant details: Nissan Teana tire specifications: The sizes are 215/60-R16 and 215/55-R17. Most models use the 215/60-R16 specification, while only the premium version features the 215/55-R17 wheel size. The original tires for the Teana are Yokohama Advan dB E75. Nissan Teana Overview: The Teana is built on Nissan's FF-L platform, featuring a MacPherson strut front suspension and a newly designed multi-link rear suspension. This combination ensures ride comfort while enhancing handling, stability, and reducing road noise. Additionally, the Teana is equipped with VDC (Vehicle Dynamic Control), which integrates EBD, TSC, ABS, and other safety systems to significantly improve traction and steering stability. This allows the vehicle to more effectively avoid hazards on icy or slippery roads, greatly enhancing both handling and safety.
7
2
Share

What are the steps for removing and installing the third row of seats in the Buick GL8?

Buick GL8 third row seat removal and installation steps are: 1. Locate the mechanism hidden behind the seat, then lift the seat; 2. Remove the seat from the front clasps, operate the mechanism to fold down the backrest, and then remove the detached seat from the vehicle compartment. Taking the 2021 Buick GL8 Land Business Class 652T Comfort model as an example: it is equipped with a 9-speed automatic manual transmission, with a top speed of 195 km/h and a fuel tank capacity of 66 liters. The 2021 Buick GL8 Land Business Class 652T Comfort model measures 5238mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. The engine produces a maximum torque of 350 Nm, with the maximum torque speed ranging from 1500 to 4000 rpm.
19
5
Share

Can You Park on a Grid Line?

Grid lines are no-parking zones. Similar to double yellow lines in the middle of the road, grid lines are prohibited markings where vehicles are not allowed to park temporarily or long-term. If a vehicle parks within this area, it violates the corresponding regulations on prohibited markings, and the driver will be fined 200 yuan and receive 3 penalty points. Below are details about grid lines: 1. Areas: Grid lines are painted on roads in front of larger institutions and units requiring emergency dispatch (such as fire stations, hospitals, etc.); grid lines are also painted at roadside three-way intersections (where traffic lights are inconvenient to install) but with frequent vehicle access. 3. Driving rules: When there are vehicles waiting at a red light opposite the yellow grid, incoming vehicles must wait at the other end of the grid and must not enter the yellow grid area to wait for the red light; otherwise, it constitutes a traffic violation.
9
3
Share

Should the Clutch Be Depressed When Parking and Turning Off the Engine?

Depressing the clutch is not required when turning off the engine. Here is more relevant information: 1. The role of depressing the clutch when starting the car: Depressing the clutch when starting the car can reduce the burden on the engine and minimize wear on components such as the battery and starter. When the vehicle is in neutral, although the input shaft gear of the engine is not engaged with the power output gear of the transmission, part of the engine's power is still consumed by components like the clutch driven disc and clutch output shaft behind the driven part of the clutch. 2. Depressing the clutch can prevent accidents: Some manual transmission drivers prefer to use the gear to hold the car when parking to prevent it from rolling, but they often forget that the vehicle is still in gear when starting it. If there is no habit of depressing the clutch when starting the car in such cases, it can often lead to sudden jerking of the vehicle, and in severe cases, traffic accidents may occur.
18
5
Share

What causes the buzzing sound and resonance in the Honda CR-V?

crv buzzing sound and resonance are caused by tensioner pulley wear and tensioner pulley wear. Details are as follows: Tensioner pulley wear: The function of the tensioner pulley is to tighten the engine belt, preventing the generator and power steering pump from slipping. Due to prolonged pressure and high-speed rotation, the bearings inside the tensioner pulley are prone to wear, resulting in noise and resonance. When it is confirmed that the buzzing sound and resonance are caused by the tensioner pulley, the engine mount should also be checked, as the engine mount helps reduce the vibration and noise generated by the engine. Tensioner pulley wear: In most front-engine vehicles, the exhaust pipe extends from the bottom of the car to the rear. When driving on rough roads or if the chassis is hit, the exhaust pipe can easily dent or deform. A deformed exhaust pipe increases exhaust resistance, leading to a buzzing sound and resonance.
20
3
Share

What does the P161300 fault code mean?

This fault code indicates an immobilizer request error, where the engine control unit and immobilizer module have different power-up timing. The relevant information about this fault code is as follows: 1. Automotive fault codes: These are codes generated by the vehicle's ECU (Engine Control Unit) when a malfunction occurs. Common fault codes are usually related to sensor failures or poor sensor performance, though some mechanical faults cannot be detected by the ECU. 2. Basic fault display: The vehicle's dashboard will show some basic fault indications, but these represent only a small portion. The main diagnostics require specialized equipment - a code reader. There are various types of code readers available, such as X-431 and KT300, but they all work on the same principle and read the same fault codes. 3. Classification: Fault codes are categorized as current codes, history codes, and intermittent codes. Current codes are easy to detect, history codes (as the name suggests) are previously recorded but not cleared fault codes, while intermittent fault codes are not consistently present.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.