What does Lingpai 180 mean?

Should You Engage the Handbrake First or Shift to Neutral First in a Manual Transmission?

After parking, engage the handbrake first and then shift to neutral. Additional details are as follows: 1. Parking operation sequence: After the vehicle comes to a complete stop, first engage the handbrake, then shift to neutral, release the clutch, and finally release the brake, turn off the turn signal, shut off the engine, press the clutch, and shift into first gear. 2. Handbrake: The professional term is auxiliary brake, which operates on a different principle from the main brake. It uses a steel wire cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause the steel wire to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness, and the handbrake's travel distance will increase. A return spring is used in conjunction with the handbrake. When the handbrake is engaged, the spring is stretched; when the handbrake is released, the spring returns to its original length. Prolonged use of the handbrake will also cause the spring to deform accordingly. 3. Neutral gear: This typically refers to the state where the vehicle's gear lever is not engaged in any forward or reverse gear, completely disconnecting the transmission from the drive wheels. In a manual transmission, the neutral position is in the middle, while in an automatic transmission, it is marked with an "N".

2

Share

Is there a time limit for curve driving?

There is no time limit for curve driving. The following points should be noted after obtaining the driver's license: 1. Regarding the probation period of the driver's license: From the day the driver's license is obtained, the probation period is one year. During the probation period, the driver's license cannot be used on highways unless there is an experienced driver with more than 3 years of driving experience sitting in the co-pilot seat. Drivers with a C1 license during the probation period should note that if they accumulate 12 penalty points, their probationary driving qualification will be immediately revoked. For large vehicle licenses above B class, if 6 to 12 points (less than 12 points) are accumulated during the probation period, the probation period will be extended by one year, and the driver must take the subject one exam within 30 days after the probation period ends. 2. Driver's license renewal: After the one-year probation period, there is no need to go to the local vehicle management office where the license was issued for renewal; the system will automatically convert the probation period to a full license. However, any traffic violations must be addressed. After 6 years, the driver must go to the issuing vehicle management office to renew the license. The required materials include: a medical examination form (from a hospital designated by the traffic police department), the driver's license, ID card, a completed application form at the vehicle management office, and three one-inch color photos. If there are no records of 12 penalty points in any cycle during the 6 years, the new license will automatically be converted to a 10-year validity period.

9

2

Share

How to Unlock a Driver's License?

In general, you need to bring your driver's license to the traffic management office where it was issued and visit the violation handling window to ask the police to help you check the reason why your driver's license was "locked." After taking the corresponding measures, it can be "unlocked." If the reason is related to health conditions, then the driver's license can only be unlocked once the physical conditions meet the requirements. The following situations may result in a locked driver's license: 1. Suffering from organic heart disease, epilepsy, Meniere's disease, vertigo, hysteria, paralysis agitans, mental illness, dementia, or other neurological diseases that affect limb movement and hinder safe driving; 2. Having used or injected narcotics within the past three years or having been released from compulsory isolation for drug rehabilitation for less than three years, or being addicted to dependency-inducing psychotropic drugs and not yet having quit; 3. Committing a hit-and-run that constitutes a crime; 4. Causing a major traffic accident while driving under the influence of alcohol or drunk driving, which constitutes a crime; 5. Having the driver's license revoked for drunk driving or driving a commercial vehicle under the influence of alcohol, and less than five years have passed; 6. Having the driver's license revoked for drunk driving a commercial vehicle, and less than ten years have passed; 7. Having the driver's license revoked for other reasons, and less than two years have passed; 8. Having the driving permit revoked, and less than three years have passed; 9. Other circumstances stipulated by laws and administrative regulations.

16

0

Share

How to Turn Off the Airbag Warning Light?

Airbags are generally located in three positions inside the vehicle: the front, sides, rear, and roof. The driver's front airbag is installed in the center of the steering wheel; passenger airbags are located in the front passenger seat and rear seats; side airbags are usually placed on the outer side of the seats or mounted on the upper frame of the side doors, with some models installing them on the A-pillars; knee airbags are positioned below the dashboard. If the vehicle has undergone disassembly and the disassembly involved airbag wiring, disconnecting the wiring and then turning on the car's power will cause the vehicle's computer to recognize the wiring as disconnected, triggering the airbag warning light and storing the fault code in the computer. In such cases, the solution is relatively simple. After restoring the wiring, use a diagnostic scanner to clear the fault code. Airbag-related components may develop faults over prolonged use or due to internal program errors, leading to the illumination of the airbag warning light. In these situations, the faulty components must be replaced to turn off the airbag warning light. Airbag repairs involve considerable professional knowledge, and car owners may not be able to resolve the issue themselves. However, we can attempt to determine whether the airbag warning light is due to an actual fault or a false alarm. For example, disconnecting the battery's negative terminal, waiting 5-10 minutes, and then reconnecting it to check if the warning light remains illuminated. If the light does not come back on, it was a false alarm. Sometimes, low battery voltage can also trigger the airbag warning light. Since car owners cannot easily determine the exact cause of the airbag warning light, it is advisable to visit a 4S shop or professional repair facility as soon as possible for inspection. Continuing to drive with the airbag warning light on may result in the airbags failing to deploy properly in the event of a collision.

12

0

Share

What are the reasons why BAIC New Energy suddenly cannot start?

Introduction to the reasons why BAIC New Energy suddenly cannot start: 1. Check whether the car battery has power. In fact, failure to ignite and start is not necessarily due to a dead battery, but a dead battery will definitely prevent ignition and starting. 2. The small battery is depleted; 3. The fuse of the starting motor is broken; 4. The steering wheel is locked in place. Correct maintenance methods for new energy vehicles: 1. Correctly grasp the charging time: Whether it is a new car or a new energy vehicle that has been used for a period of time, it is essential to master the charging time, especially after picking up a new car, it is necessary to replenish the power appropriately. During use, it is also important to correctly control the charging time. If the battery indicator shows red and yellow lights during normal driving, it is time to charge to prevent over-discharge. The charging time should not be too long, as overcharging will cause the battery to heat up and shorten its service life. 2. Protect the charger: The charger of a new energy vehicle is also an important part that cannot be overlooked during daily maintenance. When charging a new energy vehicle, it is necessary to carefully read the charger's user manual. During the charging process, ensure the charger is well-ventilated; otherwise, it will not only affect the charger's lifespan but also easily damage the battery. 3. Maintain sufficient power: After daily use of a new energy vehicle, it is necessary to charge it appropriately. If the daily driving distance does not exceed 20 kilometers, it is best to replenish the power every two days. If the daily driving distance exceeds 50 kilometers, it should be charged on the same day to keep the car battery fully charged. 4. Cleaning of electric vehicles: Electric vehicles also need appropriate cleaning. During cleaning, care must be taken to prevent water from entering the charging socket inside the car, and waterproof measures should be implemented.

1

4

Share

Is it safe to refuel right after oil unloading at a gas station?

It is not advisable to refuel immediately after oil unloading at a gas station. When oil is just unloaded, water and impurities (including water, rust, etc.) at the bottom of the gas station's oil tank can be stirred up. If these are pumped into the car's fuel tank, they can cause hazardous incidents. Refueling at night is better than during the day. Besides avoiding the intense midday sun, refueling at night allows for more mass of gasoline for the same volume, as gasoline is billed by volume rather than weight, and it expands with heat and contracts with cold. Precautions for fuel tank usage are as follows: 1. Do not wait for the yellow light to come on before refueling: Before driving, check the fuel gauge and calculate whether refueling is needed based on the trip distance and the gauge reading. It's better to refuel in advance rather than waiting for the fuel light to come on. The fuel pump is located inside the tank and operates at high temperatures when continuously working. Being submerged in fuel helps to cool it effectively. When the fuel light comes on, it indicates the fuel level is below the pump. Frequently waiting until the light comes on to refuel can shorten the pump's lifespan, and having too little fuel in the tank may even burn out the pump. 2. Choose to refuel in the morning or evening: Generally, temperatures are lower in the morning and evening, and since gasoline has a low vaporization point, it's better to refuel during these times. Gasoline expands with heat and contracts with cold, and it is charged by volume. At lower temperatures, gasoline has a relatively higher density, meaning more mass per unit volume, resulting in more gasoline for the same volume. 3. Avoid filling the tank completely when driving in the city: For regular city driving, there's no need to fill the tank completely. A full tank increases the engine's load, leading to higher fuel consumption. Since refueling is convenient in the city, there's no necessity to fill the tank to the brim.

11

4

Share

What does Lingpai 180 mean?

Should You Engage the Handbrake First or Shift to Neutral First in a Manual Transmission?

Is there a time limit for curve driving?

How to Unlock a Driver's License?

How to Turn Off the Airbag Warning Light?

What are the reasons why BAIC New Energy suddenly cannot start?

Is it safe to refuel right after oil unloading at a gas station?

What is the fuel consumption of the Baojun 730 seven-seater?

What Causes a Car to Shake During Ignition?

What is the length of the Volkswagen Sagitar?

What is the weight of the Crown car?