what does liability car insurance cover

How to Shift to Neutral in a Haval F7 When the Battery is Dead?

First, locate the cover with the SHIFTLOCK label near the gear lever. This is an emergency button specifically designed for shifting to neutral when the vehicle's battery is dead. Use a pin to insert into the gap and pry the cover downward to open it. After prying open the cover, you will see a keyhole inside. At this point, you can insert the vehicle's physical key or another elongated object into the keyhole. Once the physical key or another elongated object is inserted, the vehicle's gear can be controlled, allowing you to shift the gear to the N (Neutral) position.

4

5

Share

How to Fold Down the Rear Seats in a Sedan?

In the rear of the car, locate the seat release latch, which is positioned at the shoulder area of the seat. Each rear seat position has a release handle. After finding the release handle, the latch is used to adjust the seat folding ratio. You can fold it down completely or halfway, depending on your needs. Ensure the seat is facing forward. On both sides of the rear seats, there are switches near the headrest area. Press the switch and push the seat forward to its maximum position. Open the trunk. Below the rear seats in the trunk, there are black straps. Pull them backward, then lift the seat upward and hook it onto the headrest of the front seat.

17

0

Share

Why Do Domestic Cars Rust?

Introduction to the reasons why domestic cars rust is as follows: Human factors: Driving frequently through waterlogged areas or often parking the car in places with high humidity, such as near the seaside or riverside, causes prolonged contact between the chassis and water, leading to rust. Additionally, if the owner rarely maintains the car's chassis, it can also result in rust. External factors: External factors are mainly related to the usage environment. Some areas have poor environmental conditions with frequent exposure to acid rain and corrosive dust, while others have humid weather and heavy rainfall. In places with poor road conditions, the chassis is often scraped or hit by gravel, causing surface damage and increasing the likelihood of rust in vulnerable areas such as the engine underguard and exhaust pipe.

16

0

Share

How to reset the wrench light on JAC Refine S2

JAC Refine S2 wrench light reset method mainly includes: 1. Insert the car key and press the small button on the lower right side of the instrument panel. 2. Turn the key. Rotate it once to the ACC position (power-on position) and wait for 3 seconds. 3. Power off. Turn the key to cut off the power. 4. Turn the key to the ACC position again to reset the wrench light. Extended content: This vehicle has two powertrain options: 1. Equipped with a 1.5L inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or CVT transmission, delivering maximum power of 83KW and maximum torque of 146N·m. 2. Equipped with a 1.6L inline 4-cylinder naturally aspirated engine, matched with a CVT transmission, producing maximum power of 88KW and maximum torque of 150N·m.

15

4

Share

Is a Dash Cam Necessary for Driving?

Driving requires a dash cam. A dash cam is an instrument that records images, sounds, and related information during vehicle travel. It generally comes with many functions. Overview of Dash Cams: A dash cam is an instrument that records images, sounds, and related information during vehicle travel. After installing a dash cam, it can record the entire driving process, including video images and sounds, providing evidence for traffic accidents. While driving, it continuously records videos, simultaneously logging time, speed, and location, functioning much like a "black box." Functions of Dash Cams: They protect the legal rights of drivers. In case of a collision with pedestrians crossing the road or cyclists and motorcyclists, there is a risk of extortion. With a dash cam, drivers can provide valid evidence for themselves.

9

0

Share

What is the tightening angle for Bosch spark plugs?

Bosch spark plug tightening angle: Rotate 180 degrees for new installation. For reuse, rotate 30 degrees. Torque for spark plug replacement: When replacing spark plugs yourself, the torque used should match the required torque of the specific spark plug. Different-sized spark plugs require different torque values. For example, 12mm spark plugs generally require 20-25N/m torque, while 14mm spark plugs typically need 25-30N/m torque for tightening. Therefore, proper installation torque is crucial when replacing spark plugs yourself - neither too loose nor too tight. Consequences of insufficient spark plug installation torque: If the spark plug isn't tightened with sufficient torque, it may lead to oil seepage and air leakage, affecting engine performance. Over-tightening spark plugs may cause thread stripping or breakage.

19

4

Share

what does liability car insurance cover

How to Shift to Neutral in a Haval F7 When the Battery is Dead?

How to Fold Down the Rear Seats in a Sedan?

Why Do Domestic Cars Rust?

How to reset the wrench light on JAC Refine S2

Is a Dash Cam Necessary for Driving?

What is the tightening angle for Bosch spark plugs?

Where is the cabin air filter located in the 2018 Malibu?

How to Determine if a Hydraulic Oil Pump is Damaged?

Where is the Honda Air Filter Located?

What are the causes and solutions for steering wheel vibration in the HOWO T7?