What does 'Leopard CS10 maintenance light reset' mean?

How to reset the maintenance light on the Touran?

The method to reset the maintenance light on the Touran is: 1. Turn off the ignition switch and hold down the 0.0 button below the instrument panel; 2. Turn on the ignition switch while holding down the 0.0 button; 3. The maintenance light will appear on the instrument panel, then release the button; 4. Press the 0.0 button once, and the maintenance light will be reset. Taking the 2021 Touran as an example, it belongs to the MPV category, with body dimensions of: length 4527mm, width 1829mm, height 1659mm, and a wheelbase of 2791mm. The 2021 Touran is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, a maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.

12

3

Share

What are the precautions for driving on the highway at night?

Precautions for driving on the highway at night are: 1. Both the driver and front-seat passengers must fasten their seat belts, and the driver should not answer phone calls; 2. Avoid sudden steering wheel movements while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance; 4. Only use adjacent lanes for overtaking, and immediately return to the driving lane after overtaking. Vehicles must not straddle or drive on lane dividers; 5. Do not reverse, drive in the opposite direction, make U-turns or turns by crossing the central divider, conduct test drives or drive training vehicles, or overtake or park on ramps; 6. Maintain a distance of at least 100 meters between vehicles. When the speed is below 100 km/h, the distance from the vehicle ahead in the same lane can be appropriately reduced, but the minimum distance must not be less than 50 meters.

2

0

Share

How to reset the tire pressure warning light on Trumpchi GM8?

Long press the tire pressure reset button to clear the tire pressure warning light on the dashboard. Tire pressure reset is an operation to reset the tire pressure monitoring system after resolving tire pressure issues. Tire pressure reset method for Trumpchi GM8: First, turn on the ignition switch, then long press the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to veering, posing risks to driving safety; Increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; Reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout; Increases tire body deformation, making the tire side prone to cracks, and generates flexing movements, leading to excessive heat, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear at the tire shoulders.

20

1

Share

What is the highway range of the Tesla Model 3?

Tesla Model 3 has a highway range of 245km. The driving range, also known as endurance capability, refers to the total distance a vehicle or ship can travel continuously with maximum fuel reserves. For electric vehicles, the driving range refers to the distance traveled from a fully charged state of the power battery to the end of the test under standard conditions. Taking the 2021 Tesla Model 3 as an example, its body dimensions are: 4694mm in length, 1850mm in width, and 1443mm in height, with a wheelbase of 2875mm and a trunk capacity of 425 liters. The 2021 Tesla Model 3 features a double-wishbone independent front suspension and a multi-link independent rear suspension.

12

3

Share

What Level is Tesla's Autonomous Driving?

Tesla's autonomous driving technology is classified as Level 2. Level 2 autonomous driving is not fully autonomous and requires the driver to remain attentive. Below is an introduction to the levels of autonomous driving technology: 1. Level 0: No automation. The driver must constantly control all mechanical and physical functions of the vehicle, with only alarms as assistance. 2. Level 1: The driver operates the vehicle, but certain individual systems can sometimes assist, such as Electronic Stability Program (ESP) or Anti-lock Braking System (ABS), which help enhance driving safety. 3. Level 2: The driver primarily controls the vehicle, but the system provides partial automation to significantly reduce the operational burden. Examples include Adaptive Cruise Control (ACC) combined with automatic following and lane departure warning, as well as Automatic Emergency Braking (AEB), which integrates technologies like blind-spot detection and collision avoidance systems. 4. Level 3: The driver must be ready to take control at any time. During autonomous driving assistance, such as when following a vehicle, the driver may temporarily be exempt from operation. However, when the vehicle detects a situation requiring driver intervention, it will immediately return control to the driver, who must take over to handle scenarios beyond the system's capability.

19

5

Share

Where is the tire pressure reset button on the Volkswagen CC?

The tire pressure reset button on the Volkswagen CC is located on the dashboard center console, in front of the gear lever, marked with a capital SET. The tire pressure reset is an operation to reset the tire pressure monitoring system after the tire pressure fault has been resolved. Tire pressure reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the original data, causing the tire pressure monitoring indicator light to turn on. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new part is possible.

5

3

Share

What does 'Leopard CS10 maintenance light reset' mean?

How to reset the maintenance light on the Touran?

What are the precautions for driving on the highway at night?

How to reset the tire pressure warning light on Trumpchi GM8?

What is the highway range of the Tesla Model 3?

What Level is Tesla's Autonomous Driving?

Where is the tire pressure reset button on the Volkswagen CC?

What are the differences between imported and domestically produced Audi vehicles?

What engine is equipped in the BMW 730?

How to Remove the Rear Seats of the City?

What does it mean when the Lexus TRC is turned off?