What does L0 mean in car air conditioning?

How many kilometers can a underbone motorcycle travel on a full tank of fuel?

A full tank of fuel for an underbone motorcycle can generally cover approximately 130 kilometers. Check with the oil dipstick or oil window as the standard. Checking the oil level height: When changing the oil, park the motorcycle on a flat surface using the main stand, remove the drain screw at the bottom right side of the engine to drain all the old oil, then reinstall the drain screw. Add about 800 milliliters of new oil, insert the dipstick into the dipstick hole (push it all the way in without screwing it in), then pull it out to check that the oil level is between the upper and lower marks at the end of the dipstick. Choosing a qualified oil can: During high-temperature seasons, even when using a fuel pump to fill a can with gasoline to refuel a motorcycle parked in a designated refueling area, it is important to use a can made of conductive materials like iron or aluminum. Plastic containers must not be used as oil cans, as they can easily cause static electricity reactions, leading to fires.

11

3

Share

Can You Still Drive with an Engine Control System Malfunction?

Continuing to drive with an engine control system malfunction can cause the vehicle's engine to stall, primarily due to insufficient power supply, making it unsafe to continue driving. The reasons for engine malfunctions are as follows: Engine Knock: When non-sensing knock exceeds the range that the engine computer can adjust, the engine malfunction light may illuminate and trigger an alarm. Of course, there are many factors that can influence engine knock. Air Flow Sensor Malfunction: The air flow meter converts the detected intake air into an electrical signal and transmits it to the engine computer. Based on the optimal air-fuel ratio, the electronic control unit indirectly determines the fuel quantity. Poor or Substandard Gasoline Quality: Poor gasoline quality not only affects incomplete combustion of the air-fuel mixture in the cylinder, leading to excessive carbon deposits, but also risks clogging the fuel system and corroding components. Additionally, it disrupts the normal mixture concentration and its final effect. When the engine malfunction light comes on, it is often accompanied by shaking and vibrations.

12

3

Share

How Long Does It Take to Repair a Wheel Hub?

Automotive wheel hub repair typically takes two to three hours. While driving, it is essential to be cautious to prevent damage. However, if scratches occur, they should be addressed promptly to avoid worsening the situation, which could lead to adverse consequences and impacts. When replacing a wheel hub, the following parameters should be noted: 1. Center Bore (CB): The size of the wheel hub's center hole. Although wheel hubs with different center bore sizes from the original can be installed using adapters, this is not recommended for safety reasons. 2. Pitch Circle Diameter (PCD): For example, a wheel hub with a PCD of 5x120mm means it has five lug bolts forming a circle with a diameter of 120mm. This value should also match the original specifications. 3. Offset (OFFSET): Also known as the ET value. A positive value indicates that the wheel hub's mounting surface is outside the center plane, while a negative value means it is inside. Passenger cars generally have positive offset values, and this parameter significantly affects the vehicle's driving stability and cornering trackability.

4

0

Share

What Does a Driving Test File Include?

It includes the application form signed by the student, medical examination form, training record form, test score form, exam appointment form, skill form, etc. Below is a related introduction to the driving test file: 1. File Content: The driving license file is a form that contains the application form signed by the student, medical examination form, training record form, test score form, exam appointment form, skill form, and other related information. If the file lacks complete information, the student's driving license will not be issued. For example, missing the student's signature or the examiner's signature, etc. After the student completes all the tests, the file must be kept for at least three years. 2. Importance of the File: The student's file for applying for a motor vehicle driving license is kept by the vehicle management office after the student passes the test and obtains the driving license. This file is very important as it contains the student's records of participating in all subjects of the test and learning. If a new driver is involved in a major traffic accident within three years, their file will be reviewed. Students need not worry as the file is kept by the driving school during the learning period and by the vehicle management office after obtaining the license. Those who have not yet obtained the license should take care not to lose, damage, or misplace any documents they are responsible for.

13

0

Share

What raw materials are used in automotive urea?

Automotive urea is an essential product for heavy-duty diesel vehicles to meet the National IV emission standards. Automotive urea refers to an aqueous urea solution with a urea concentration of 32.5% and a solvent of ultra-pure water, with raw materials being urea crystals and ultra-pure water. Vehicle emission standards refer to regulations on the content of harmful gases such as CO, HC+NOx, and PM emitted from vehicle exhaust. Precautions for urea addition and storage: During transportation, urea needs to be protected from light and high temperatures. The optimal transportation and storage temperature should be maintained between -5°C and 25°C, as high temperatures can cause urea decomposition. When carrying urea in the vehicle, necessary shockproof measures should be taken for the urea packaging to avoid spillage due to road bumps, which could corrode the vehicle. If the purity of the automotive urea is insufficient or the quality is inferior, the vehicle's engine may automatically decelerate. Inferior quality urea can contaminate the catalyst in the SCR catalytic reaction tank, leading to serious consequences.

9

2

Share

Which Fuse to Pull to Prevent Car from Starting?

Pull the main relay fuse to prevent the car from starting. Fuse box locations and functions: Generally, there are two fuse boxes in a vehicle. One is located inside the engine compartment and is responsible for the normal operation of external electrical components, such as headlights, horns, the engine control unit, the air conditioning compressor, and the windshield washer motor, providing circuit protection. The other is located on the left side of the steering wheel or inside the glove box, responsible for the normal operation of internal electrical components, such as power windows, cigarette lighters, power seats, and airbags. Types of automotive fuses: There are also two different types of automotive fuses. One is the blade-type fuse, which is thinner, plug-in style, and allows a circuit current of 5-25A. The other is the slow-blow fuse, which is square, plug-in style, and allows a circuit current of 20-60A. The color represents the amperage of the fuse, making it easy to distinguish between different amperage ratings, which are also labeled on the fuse.

19

0

Share

What does L0 mean in car air conditioning?

How many kilometers can a underbone motorcycle travel on a full tank of fuel?

Can You Still Drive with an Engine Control System Malfunction?

How Long Does It Take to Repair a Wheel Hub?

What Does a Driving Test File Include?

What raw materials are used in automotive urea?

Which Fuse to Pull to Prevent Car from Starting?

Which country does the Ford Mustang brand belong to?

Which is faster for charging new energy vehicles, DC or AC?

What causes the AC indicator light to flash in a Mitsubishi Pajero when the AC is turned on?

Does the driver's license time count from registration or from the subject one test?