What does Jaguar AEB unavailable mean?

1 Answers
Shelly
07/30/25 10:24am
AEB function cannot be used. AEB stands for Autonomous Emergency Braking, which is translated as automatic braking system in Chinese. It is an active safety technology for vehicles that can automatically monitor the distance and relative speed of targets ahead. When the driver brakes too late, with insufficient braking force, or fails to brake, the vehicle will issue a warning or initiate autonomous braking. More relevant information is as follows: Main functions: The main functions of AEB include Pre-Collision Warning (PCW), Emergency Braking (EB), and Pedestrian Protection (PP). Through the combined monitoring of radar and cameras, the system detects the situation of vehicles and pedestrians ahead. If a potential collision risk is detected, the system will take corresponding warning and braking measures to avoid a collision or reduce the severity of the collision.
Was this review help?
5
5
Share
More Forum Discussions

What is the purpose of an emergency escape ramp on highways?

Here are the functions of emergency escape ramps on highways: 1. Ensure road traffic flow: They allow out-of-control vehicles to quickly exit from the main lane, preventing such vehicles from affecting traffic on the main road and ensuring safe passage. 2. Assist vehicle braking: Vehicles experiencing brake failure at high speeds pose significant safety risks if they cannot exit the main road promptly, especially in areas requiring deceleration. Emergency escape ramps provide a controlled area for these vehicles to slow down and stop. 3. Prevent vehicle loss of control: They help vehicles with brake failure to decelerate and stop, which is the original intention behind setting up these ramps. In the event of a vehicle losing control, braking within the shortest possible time can prevent injuries or significant vehicle damage.
17
5
Share

Can 2000 Grit Sandpaper Be Used to Polish Car Glass?

No problem, this type of water sandpaper can be used to polish car glass. Here is some relevant information about car glass: 1. Introduction: The production of car glass involves heating the glass in a furnace to near its softening temperature, then quickly transferring it to fans with varying cooling intensities for uneven cooling. This creates different stress levels between the main viewing area and the peripheral areas of the glass. Generally, glass produced this way is zone-tempered glass. 2. Maintenance Method: Maintain consistent temperatures inside and outside the car. After using the car for the day, do not immediately lock the car and leave. Instead, open the doors to ventilate and wait until the interior temperature drops to match the exterior temperature (which takes about a minute). Then, turn on the power and use the wipers to clear any snow or water from the windshield. At this point, close and lock the doors. The next morning, simply sweep away the snow from the windshield. If there is no ice beneath the snow, you can drive off immediately.
11
1
Share

Is it necessary to drain the fuel when replacing the fuel pump?

Replacing the fuel pump generally does not require draining the fuel. Here is a detailed introduction to automotive fuel pumps: 1. Function: The fuel pump serves as the interface between the high-pressure and low-pressure fuel circuits. Its function is to generate fuel pressure in the common rail by controlling the fuel output. Its role is to increase fuel pressure for high-pressure injection to achieve atomization. 2. Purpose: The main purpose of the fuel pump is to act as a power source for hydraulic devices such as jacks, heading machines, extruders, and cotton gins. 3. Installation precautions: During the installation of the fuel pump, all openings should be covered to prevent debris from entering the machine.
20
0
Share

Is BASF Happy Run Really Effective?

BASF Happy Run is effective. Here is some relevant information about BASF: 1. Organizational Structure: The BASF Group operates under a leadership system where the Management Board is responsible for overall management under the supervision of the Supervisory Board. The Group Management Committee includes an Executive Board responsible for daily business operations and oversees the work of department managers. The Group Management Committee is divided into 20 business divisions, 12 regional management departments, 11 corporate divisions, and 6 functional departments, adopting a matrix-style organizational management system. 2. Group Scale: BASF's headquarters is located in Ludwigshafen, with over 350 subsidiaries and plants in 39 countries. Within Germany, there are more than 60 production facilities located in cities such as Ludwigshafen, Münster, Hamburg, Stuttgart, Mannheim, Würzburg, and Cologne. The BASF Group headquarters and BASF AG in Ludwigshafen resemble a 'small city,' covering an area of 7 square kilometers. This 'small city' includes 1,750 buildings, 100 kilometers of roads, 200 kilometers of railway tracks, 2,500 kilometers of pipelines, and 5 power stations. Additionally, BASF has its own hospital, travel agency, and train station.
2
4
Share

Which lane should be used when driving between 90 and 110 km/h?

When driving at speeds above 90 km/h but below 110 km/h, you should use the middle lane. Here are the specific regulations for highway speed limits: 1. Speed limits for three lanes: On highways with three lanes, the speed limits from left to right are generally as follows: the first lane (overtaking lane) is 100-120 km/h, the second lane (travel lane) is 90-110 km/h, and the third lane (truck lane) is 60-100 km/h. 2. Speed limits for two lanes: On roads with two lanes in the same direction, the minimum speed in the overtaking lane is 100 km/h; on roads with three or more lanes in the same direction, the minimum speed in the overtaking lane is 110 km/h, the minimum speed in the travel lane is 90 km/h, and the speed in the deceleration lane should be below 50 km/h.
11
4
Share

What happens if you start the car without shifting to neutral?

It mainly depends on whether it's an automatic or manual transmission. Manual transmission vehicles are unaffected. The consequences of starting an automatic transmission car in neutral and the correct method for parking and turning off the engine are as follows: 1. Turning off the engine in neutral poses no issues for the car. The engine should only be turned off in N (neutral) or P (park) gear. Turning off the engine in D (drive) or R (reverse) gear can damage the transmission. The prerequisite for neutral is ensuring the car is on level ground to prevent rolling. 2. The correct method for parking and turning off the engine is to first shift from the driving gear to N gear, pause for 0.5-1 second in N gear, then directly shift to P gear, and finally apply the handbrake. 3. This operation ensures the gearshift doesn't switch twice consecutively. The action should be smooth, as each gear has a detent. Although you pass through R gear, you're not actually shifting into R gear.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.