What does it mean when the yellow warning light comes on in a Honda Lingpai?

1 Answers
FelicityRose
07/30/25 4:58am
Honda Lingpai's yellow warning light serves as an alert. Below are the reasons and solutions for the yellow warning light in Honda Lingpai: The car's engine system has malfunctioned. Solution: It is necessary to promptly visit a 4S shop or repair shop to use a computer to retrieve the fault code and carry out timely maintenance to avoid serious consequences to the car's engine. Any faults that cause insufficient power, an overly rich air-fuel mixture, or excessively low coolant temperature will lead to excessive fuel consumption by the engine. High engine idle speed is also one of the reasons for excessive fuel consumption. An overly rich air-fuel mixture will not result in a decrease in power; on the contrary, power may slightly increase.
Was this review help?
6
5
Share
More Forum Discussions

How to manually reset the maintenance light for the 2021 Haval H6?

First, turn on the ignition switch to keep the car powered without starting it. Press the reset button on the instrument panel, and the display will show the reset system. Each press of the reset button will switch to the next reset system. Select the maintenance reset system, press and hold the reset button for about 3 seconds until the relevant icon appears on the instrument display, indicating that the maintenance reset is successful. Here are some additional details: Distinguishing between red and blue: The distinction between red and blue badges is only to meet the needs of market segmentation, catering to the diverse preferences and aesthetic characteristics of different groups. The maintenance interval for the Haval H6 is every 7,500 kilometers. If the maintenance light comes on, the car needs maintenance. Regular maintenance can improve the car's performance and extend its service life.
6
1
Share

Can I Keep the License Plate When Selling My Car?

Selling a car allows for the retention of the license plate, but applying to use the original motor vehicle license plate number must meet the following conditions: 1. The owner of the motor vehicle must have owned the original vehicle for more than three years. 2. The application must be submitted within six months (including holidays) after completing the transfer or cancellation registration. 3. All traffic violations and accident liabilities related to the original motor vehicle must be resolved. Below are some important notes regarding license plate retention: 1. The motor vehicle license plate can only be used by the original owner and cannot be transferred to others (except for spousal changes). 2. The application for retaining the license plate must be made within a one-year validity period; otherwise, it cannot be processed. 3. If the vehicle ownership changes due to inheritance, purchasing a used car with a desirable license plate, or receiving a vehicle as a gift from relatives or friends, the license plate cannot be transferred in these cases.
6
3
Share

What does Lane Assist Function mean?

Lane assist function is a type of intelligent driving assistance, generally based on the vehicle's Lane Departure Warning Assist System, while coordinating the control of brakes, throttle, and steering to keep the vehicle centered in the lane with the assistance of a camera. Below is relevant information: System Introduction: If the Lane Keeping Assist System identifies the lane markings on both sides of the current lane, the system is in standby mode. This is indicated by a green indicator light on the dashboard. When the system is in standby mode, if the turn signal is activated before crossing the lane markings, the warning signal will be suppressed, assuming the driver is intentionally changing lanes. Application Scenarios: This system is mainly applied on structured roads, such as highways and roads with good pavement conditions (clear lane markings). It starts operating when the vehicle speed reaches 65 km/h or above.
15
0
Share

What is the difference between adding a motorcycle license and directly taking the test?

There is almost no difference in the procedures between directly taking the test and adding a license. 1. Adding a license explanation: Adding a license is to combine two driver's licenses into one. The motorcycle license and C1 license still need to be obtained by taking their respective tests separately. If you do not have a motorcycle driver's license, you can only take the test directly; if you do, you can only add the license. 2. Requirements for adding a license application: Hold any type of motorcycle driver's license (D, E, F license). The application requires that you have not accumulated 12 penalty points in the current scoring cycle and the one before the application. And provide: (1) The applicant's identity proof. (2) A medical certificate issued by a county-level or military regiment-level medical institution regarding physical conditions. (3) The held motor vehicle driver's license. (4) Fill out the application form.
6
0
Share

How to Disable a Car Anti-Theft Lock?

Car anti-theft lock can be disabled by: Disconnecting the negative terminal of the battery for a period of time, waiting for the engine's protection data to be cleared, and then reconnecting it. Generally, a power disconnection of about 10 seconds is sufficient. Here is some relevant information: Car anti-theft locks can be basically divided into three categories based on their technical principles: Mechanical anti-theft locks; Electronic anti-theft alarm locks; Networked anti-theft (positioning, tracking) systems. Reasons for car anti-theft lock malfunctions include: Damaged or malfunctioning buttons on the remote control; Insufficient battery power in the remote control; Issues with the central control of the car anti-theft device; The presence of nearby jammers, requiring attention to protection.
3
5
Share

How to Clean a Car's Three-Way Catalytic Converter?

Three-way catalytic converters are cleaned using the "drip method." This method involves connecting a plastic hose to the engine's vacuum solenoid valve and relying on the air pressure in the hollow tube to draw the cleaning agent from the infusion bottle into the engine. The cleaning agent then exits through the exhaust pipe, cleaning the three-way catalytic converter in the process. The three-way catalytic converter is the most important external purification device installed in a car's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from the car's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. The three-way catalytic converter is typically installed in the first bulge of the exhaust manifold under the car's chassis and resembles a long, kettle-shaped device. The service life of a three-way catalytic converter ranges between 80,000 to 100,000 kilometers. The exact lifespan depends on the car's usage conditions, fuel quality, and driving environment.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.