What does it mean when the water temperature gauge of the Sylphy Classic turns red?

1 Answers
CaydenLynn
07/29/25 11:41pm
Sylphy Classic's water temperature gauge turning red indicates that the car's water temperature is too high. If the water temperature warning light comes on while driving, it means the engine temperature is excessively high. In such cases, it is necessary to stop the car and inspect it as soon as possible. Continuing to drive with an overheated engine can cause severe damage and irreversible harm to the engine. The Sylphy has body dimensions of 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm. Its fuel tank capacity is 47L, and its fuel consumption ranges from 4.9 to 5.7L per 100 kilometers.
Was this review help?
18
3
Share
More Forum Discussions

How many cylinders does the Trumpchi GA6 engine have?

Trumpchi GA6 engine is a three-cylinder engine, with a firing order of 1 and 3 and 2 or 1 and 2 and 3. Similarly, the crankshaft rotates 720 degrees for one intake, compression, power, and exhaust stroke, but only three cylinders can do work, with each cylinder doing work for 180 degrees of crankshaft rotation. The car is equipped with a 1.5-liter turbocharged engine, with a maximum power of 124 kW, a maximum torque speed of 1700 to 4000 rpm, and a maximum power speed of 5000 rpm. The body dimensions are 4891mm in length, 1850mm in width, and 1505mm in height, with a wheelbase of 2815mm.
17
3
Share

Can the seat belt of a sedan be replaced?

The seat belt of a sedan can be replaced, and it also requires regular maintenance. The seat belts in the rear seats or the front passenger seat are used less frequently compared to the driver's seat belt. It is recommended to conduct regular inspections. If there is a malfunction such as the belt getting stuck, do not attempt to disassemble it yourself; it is advisable to seek professional repair services. The method for replacing a sedan seat belt is as follows: 1. Locate and remove the sensor wire of the seat belt buckle; 2. Remove the seat cushion, take off the airbag, find the bolt securing the seat belt, and remove the seat belt buckle; 3. Locate and remove the seat cushion sensor inside the seat cushion; 4. Install the new seat belt buckle onto the seat.
1
2
Share

How to Deal with Black Paint Scratches on a White Car?

The methods to deal with black paint scratches on a white car are: 1. Use a high-strength paint cleaner to wash the entire car. When using the cleaner, avoid particles and dust causing new scratches during the polishing process; 2. Use a mechanical polishing machine along with a mirror-finish treatment agent to remove the black paint. The methods for maintaining the car's paint surface are: 1. Remove dust from the car body promptly to minimize the adsorption of dust due to static electricity; 2. Rinse rain stains with clean water as soon as possible after rain to avoid damaging the paint surface; 3. Avoid washing the car under direct sunlight or high temperatures; 4. Use clean and soft cloths or sponges for washing to prevent metal shavings and sand particles from causing scratches.
15
2
Share

Where is the mirror folding switch for the Trumpchi GA4?

The mirror folding switch for the Trumpchi GA4 is located on the left armrest in the driver's cabin. At the very top of the armrest position, there is a button with an arrow, which is the mirror folding switch. The buttons represent: the L button stands for the left electric adjustment switch; the R button stands for the right electric adjustment switch. The Trumpchi GA4 is positioned as a compact car, with body dimensions of 4692mm in length, 1805mm in width, 1500mm in height, and a wheelbase of 2660mm; all models are front-wheel drive. In terms of suspension, the Trumpchi GA4 features a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
20
5
Share

How to Use Rearview Mirrors for Straight-Line Reversing?

When reversing in a straight line, focus on the rear of the car. To make the rear of the car turn right, steer to the right. To make it turn left, steer to the left. Below is an introduction to reverse parking: 1. Introduction: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to maneuver the car in a designated area. 2. Dimensions: The test area is 16M long and 6.83M wide, with the parking space measuring 5.25M in length and 2.31M in width. 3. Types: The first type is the 'non'-shaped reverse parking, commonly found in large shopping centers. The second type is the roadside 'one'-shaped reverse parking, also known as parallel parking.
19
5
Share

What does 'set' mean when displayed in a car?

When 'set' is displayed in a car, it refers to cruise control deceleration, or alternatively, temporarily canceling cruise control. Pressing 'set' sets the current speed as the cruising speed, and the corresponding button to 'set' is 'res'. The 'res' button also has two meanings: one is to accelerate after setting cruise control, and the other is to restore the previously set speed after temporarily canceling cruise control by pressing 'res'. The function of 'set' is that after adjusting the tire pressure of all four tires to the standard pressure, hold down 'set' for three seconds while observing the speedometer. A symbol with an exclamation mark inside brackets will appear, and upon hearing a 'ding' sound, the tire pressure of all four tires will be calibrated accordingly.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.