What does it mean when the vehicle jerks during the starting process in Subject 3?

1 Answers
JosephDella
07/29/25 6:16pm
Vehicle jerking refers to the intermittent sudden lurching phenomenon that occurs during the vehicle's movement in the closed-course driving test. It mostly happens during vehicle starting and low-speed driving. Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test, which is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. Below is an introduction to the content of other subject tests: 1. Subject 1: Also known as the Subject 1 theory test or the driver's theory test, it is part of the motor vehicle driver's license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test format is computer-based, with 100 questions, and a passing score of 90 or above. 2. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the closed-course driving skills test. The test items for small vehicles C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). 3. Subject 4: Also known as the Subject 4 theory test or the driver's theory test, it is part of the motor vehicle driver's license assessment. The Subject 3 test is divided into two parts: besides the road test, it also includes the safe and civilized driving knowledge test, commonly known as 'Subject 4,' which assesses 'driving ethics.' The test paper consists of 50 questions, mainly in the form of cases, pictures, animations, etc., with a full score of 100 and a passing score of 90.
Was this review help?
2
1
Share
More Forum Discussions

How to Turn on the Heating in a Volkswagen?

Press the AC button on the center panel of the Volkswagen to turn on the air conditioning, then increase the fan speed. Adjust the temperature higher by pressing the temperature touch buttons on both sides to allow the air conditioning to blow warm air. Below is some relevant information about Volkswagen: 1. Introduction to Volkswagen: Volkswagen (German: Volkswagen) is an automobile manufacturing company headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's four major automobile manufacturers. 2. Volkswagen's Brand Culture: The logo of the car has undergone several changes in history, with the VW in the logo being the first letters of its full name. The logo appears to be composed of three 'V's made with the middle and index fingers, symbolizing the company and its products' determination to win - win - win.
19
5
Share

What is the reason for the motorcycle's fuel gauge not moving when the key is turned on?

The reasons for the motorcycle's fuel gauge not moving when the key is turned on are as follows: 1. Electricity: The fuel gauge pointer has no power. 2. Float: If there is power, check the fuel level sensor, commonly known as the fuel float. Short-circuit the two wires of the float with a conductor; if the fuel gauge responds, it is a problem with the float. 3. Fuel level: The fuel level sensor is damaged. Relevant information is as follows: 1. Composition: The fuel gauge consists of a fuel level indicator with a voltage regulator and a fuel level height sensor. 2. Fuel: The function of the low fuel level warning device is to immediately illuminate a warning when the fuel in the tank is less than a specified amount, to alert the driver. It mainly consists of two parts: a sender that measures the fuel level in the tank and a fuel gauge that displays the measurement results to the driver.
20
4
Share

What to Do When the Handbrake Button Won't Pop Out?

It might be due to a stuck internal spring. You can try gently tapping the handbrake lever or repeatedly pulling and releasing the handbrake several times. Correct methods for using the handbrake: Do not engage the handbrake while driving to accelerate. If used at low speeds, it can damage the handbrake mechanism. At high speeds, due to the handbrake's imperfect sealing, uneven distribution of power between the two sides can cause one rear wheel to skid. Avoid pulling the handbrake to its highest position, as the handbrake system includes both steel cables and nylon ropes, and the nylon ropes can suffer from material fatigue. When parking on a slope, you can place bricks or other objects under the tires to transfer the force to the wheels before engaging the handbrake. For automatic transmission vehicles, first engage the handbrake to secure the car before shifting to P (Park) to reduce the load on the transmission. Here is some related information about the handbrake: Introduction to the handbrake: The parking brake, commonly known as the handbrake, provides resistance when the car is parked to prevent it from rolling. The parking brake, whether a handbrake or the parking gear in an automatic transmission, locks the drive shaft or rear wheels. The force applied by the parking brake is much weaker than that of the service brake, just enough to prevent the car from rolling on a slope. Precautions for using the handbrake: Do not pull the handbrake to its highest position, as the handbrake system includes both steel cables and nylon ropes. If consistently pulled to the highest position, the nylon ropes will quickly suffer from material fatigue.
4
2
Share

What car is the 570?

570 refers to the Lexus LX570, a large luxury SUV under the Lexus brand. Below are the relevant details about the 570: 1. Exterior Design: The LX570 has a wheelbase of 2850mm, with length, width, and height measuring 5070mm, 1980mm, and 1910mm respectively. The LX570 features a double-wishbone independent front suspension and a four-link rear suspension. It comes standard with a full-time four-wheel-drive system and a Torsen central differential. Vehicles equipped with a full-time four-wheel-drive system have all four wheels powered at all times, enhancing traction. 2. Powertrain Configuration: The LX570 is powered by a 5.7-liter V8 naturally aspirated engine, codenamed 3UR-FE. This engine delivers a maximum power of 270kW and a maximum torque of 530Nm. The engine reaches its peak power at 5600 rpm and its peak torque at 3200 rpm. It is equipped with Dual VVT-i technology and multi-point fuel injection, and features an aluminum alloy cylinder head and block.
19
2
Share

How to Clear Fog on the Outside of the Windshield?

To clear fog on the outside of the windshield, you can slightly open both windows to allow air circulation, which helps eliminate the temperature difference on both sides of the windshield, making it difficult for fog to form. Alternatively, you can spray an anti-fog agent on the windshield. The principle of the anti-fog agent is simple: spraying a layer on the windshield forms an effective protective film, preventing water vapor from condensing. Here are some additional details: 1. Precautions: It is important to note that you should never use a towel to remove fog while driving. Some drivers like to keep a towel or a box of tissues in the car. Once fog appears on the windshield, they wipe the glass vigorously while waiting at a red light or parked on the roadside. Although this method is somewhat effective, it has obvious drawbacks, as wiping can sometimes leave streaks on the glass, and the fog may quickly reappear. 2. Hazards: If you are driving on a highway and cannot stop, not being able to see ahead due to fog can be very dangerous. Therefore, using a towel to wipe fog is not recommended.
7
1
Share

What is the correct method for adding refrigerant to a car?

There are two methods for adding refrigerant: 1. High-pressure side charging: Refrigerant is added through the bypass port (multi-purpose channel) of the compressor discharge valve (high-pressure valve), known as high-pressure side charging, which involves adding liquid refrigerant. This method is characterized by safety and speed, making it suitable for the initial charging of the refrigeration system, i.e., after leak detection and vacuuming. However, it is important to note that the compressor must not be turned on during this process (the engine must be off), and the refrigerant can must be inverted. 2. Low-pressure side charging: Refrigerant is added through the bypass port (multi-purpose channel) of the compressor suction valve (low-pressure valve), known as low-pressure side charging, which involves adding gaseous refrigerant. This method is characterized by slower charging speed and is suitable for replenishing refrigerant in the system.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.