···
Log in / Register

What does it mean when the vehicle displays battery positive and negative poles?

3 Answers
McVictoria
08/30/25 8:33am
When the vehicle displays battery positive and negative poles, it means the generator is not working. Here are relevant explanations about this situation: 1. Reasons: The battery power will be quickly depleted without replenishment. Then the fuel pump, injector, spark plug, combustion control module, and various sensors will all stop working, leaving the vehicle stranded on the road. It's necessary to drive to the nearest repair shop as soon as possible for generator repair or replacement. 2. Precautions: Regularly check the tightness of all fasteners related to the generator and promptly tighten all screws. When using an integrated circuit regulator, immediately turn off the ignition switch if the engine is not running. If the generator fails to generate electricity, the issue should be resolved promptly to avoid more serious malfunctions.
Was this review help?
2
0
Share
AmaraAnn
09/12/25 5:25am
If my car shows a positive and negative battery terminal issue, I estimate the most common cause is the battery itself aging and losing sufficient charge. Possible reasons also include the alternator not working and failing to charge the battery, or corroded/loosened wire connections. I remember one time when my car kept acting up while driving—don’t panic right away. Get out, pop the hood, and check if the battery terminal bolts are tightened properly and whether there are signs of corrosion. If a charging system fault goes unaddressed, the car might suddenly stall in the middle of the road, which is very dangerous. I recommend quickly testing the voltage with a multimeter—if it’s below 12.5 volts, head to a repair shop for a new battery and alternator inspection. During routine maintenance, pay attention to the battery’s lifespan; generally, it lasts about 4 years before needing replacement, preventing minor issues from turning into major hassles.
Was this review help?
13
5
Share
Expand All
Neil
10/26/25 6:13am
When I first started driving, I encountered the battery warning light on the dashboard. It was mostly due to a faulty alternator preventing the battery from charging, which is particularly common during cold starts in winter. It's best not to rush into a long-distance drive. Instead, find a safe place to pull over and check if any fuses have blown. Also, inspect the battery casing for any signs of swelling or cracks. Don't forget that accumulated dust on the terminals can cause poor contact—clean them with a brush and try again. I recommend keeping a car emergency power supply in the vehicle to avoid being stranded at critical moments. Regular checks can also reduce such unexpected incidents and enhance your sense of security.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is the operation method of wheel alignment?

The wheel alignment operation process is as follows: 1. Drive the vehicle onto the four-post alignment lift and check the tire pressure and vehicle height. 2. Lift all four wheels off the ground for the next step of inspection. 3. Check the tires for irregular wear, deformation, etc. If the wear reaches the acceptable minimum standard, data can be measured. 4. Inspect the upper and lower suspension, stabilizer bar, subframe, and chassis for any deformation or looseness. 5. Check the rear axle, lateral control rod, and rear tie rod for deformation and whether the rubber bushings are loose. 6. After confirming no abnormalities, lower the vehicle and shake it several times to ensure the suspension system is in normal condition. Then, remove the wheel alignment locking pins. 7. Turn on the computer and prepare for the detection process. Secure the steering wheel, install the wheel alignment sensors, connect the cables, and enter the wheel alignment detection system. Follow the computer's operating sequence to read the data. 8. Based on the deviation of the alignment angle data, determine whether adjustment or replacement of parts is necessary. 9. Adjust the alignment angles starting from the rear wheels to the front wheels. The front wheel toe angle should be adjusted last, as adjustments to other alignment angles can align the thrust angle with the vehicle centerline, which will affect the front wheel toe. 10. Rear wheel camber adjustment: Install the camber adjustment tool on the shock absorber and tighten or loosen it according to the required alignment angle. 11. Adjust the rear wheel toe: The toe can be increased or decreased by adjusting the length of the lateral control rod.
17
0
Share

Why can't I play music when my Lynk & Co is connected to Bluetooth?

If you cannot listen to music after connecting your Lynk & Co 03 to Bluetooth, it may be because the Bluetooth volume on your phone or the car's audio system is not turned on, or the connection between the car's Bluetooth and your phone's Bluetooth is not properly established. Here are other reasons why there might be no music when connected to Bluetooth: Incompatible pairing code: If the sound is turned on but you still can't play music, it might be due to an incompatible pairing code between the music playback program and the car. In this case, you can still answer calls but cannot play music. It is recommended to change the car's Bluetooth playback audio settings; after changing, the music playback function should work normally. Music option not enabled: If you are playing music on your phone but there is no sound in the car, it is likely because the music option on the car's audio system is not turned on. Once enabled, the music should play.
5
4
Share

What type of transmission fluid is used for the Mazda CX-4?

The Mazda CX-4 uses ATF-FZ transmission fluid. Types of transmission fluid: Transmission fluids are generally divided into three types: manual transmission fluid (commonly known as gear oil), automatic transmission fluid (commonly known as ATF), and continuously variable transmission fluid (commonly known as CVTF). Performance and maintenance methods of transmission fluid: Transmission fluid reduces friction and wear, controls clutch friction and synchronizer performance. It also bears loads (low-speed high torque, vibration loads), dissipates heat, reduces vibration and noise, and cleans contaminants from gear meshing (cleaning function). Additionally, it prevents corrosion, pitting, and surface metal tearing, isolates metal surfaces, and prevents direct metal-to-metal contact. When experiencing body shaking, gear-shift hesitation, or a transmission high-temperature warning on the dashboard, the transmission fluid should be replaced promptly.
2
4
Share

What are the reasons for the loud engine noise in the Trumpchi GS4?

The reasons for the loud engine noise in the Trumpchi GS4 are: 1. Insufficient engine oil or cold engine oil not yet warmed up, leading to inadequate oil pressure; 2. Presence of impurities or excessive dirt in the engine oil, preventing effective regulation of oil pressure; 3. Mechanical interference in the engine or blockage in the lubrication circuit. The Trumpchi GS4 is a compact SUV under GAC Motor, equipped with a 1.5T turbocharged engine delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum power speed of 5000 rpm. It features a MacPherson independent front suspension and a multi-link independent rear suspension.
1
4
Share

How to Turn on the Heating in BYD S6?

To turn on the heating in a BYD S6, rotate the temperature control knob to the red zone and then turn on the fan speed switch. Taking the 2014 BYD S6 Manual Flagship model as an example, it is a mid-size SUV with body dimensions of 4810mm in length, 1855mm in width, and 1725mm in height, a wheelbase of 2720mm, and a fuel tank capacity of 72 liters. The 2014 BYD S6 Manual Flagship is equipped with a 1.5L turbocharged engine, delivering a maximum power of 113 kW at 5200 rpm, paired with a 6-speed manual transmission.
11
5
Share

Where are the Mazda 6 sunroof drainage outlets located?

The Mazda 6 sunroof has one drainage outlet at each of the four corners of the sunroof. When you open the sunroof, you can easily see four small holes, each connected to a hose that leads to the front and rear of the car. If these drainage holes at the four corners become blocked, water cannot drain properly and may seep into the interior. The hazards of blocked drainage outlets and cleaning methods are as follows: Hazards of blocked drainage outlets: If the drainage holes at the four corners are blocked, water cannot drain properly and may seep into the interior. In severe cases, water may flow along the roof to the sunroof motor inside the car. If the sunroof motor is used while powered on, it may short-circuit and burn out. Cleaning methods: Initially, blockages occur at the entrance of the drainage holes, which can be easily seen and cleaned by opening the sunroof. Over time, debris may enter the drainage hoses and move further inside, making it harder to clear. In such cases, it is best to visit a 4S shop and have a professional technician perform the cleaning.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.