What does it mean when the VC light on the dashboard is on?

2 Answers
NevaehRose
09/03/25 4:56am
The VC light on the car indicates that the vehicle's electronic traction control system is active, which means the anti-skid system is functioning. There is an anti-skid system off button in the car; pressing it will turn off the warning light. Below is additional information: 1. Exhaust Temperature Warning Light: When the exhaust temperature warning light comes on, the driver should immediately reduce speed or stop the vehicle. The warning light will automatically turn off once the exhaust temperature decreases (however, if it's a fuse-type exhaust temperature warning light, it will remain on unless adjusted or repaired). If the exhaust temperature warning light does not turn off, the cause should be identified and the issue resolved before continuing to drive. 2. Brake Warning Light: The brake warning light is red and features a "!" symbol inside a circle. If the red brake warning light comes on, it indicates one of the following issues with the brake system: severe wear of the brake pads, low brake fluid level, or the parking brake being engaged (parking brake switch closed), among others.
Was this review help?
5
1
Share
Adriana
09/15/25 6:28am
When the VC light on the dashboard comes on, as an experienced driver, I have to remind you that it usually indicates a problem with the Vehicle Stability Control system. This system automatically adjusts the wheels during skidding or sharp turns to prevent rollovers, and the light coming on means it might be malfunctioning. Back when I was younger driving older cars, we didn't have these warning lights—today's electronic systems are much more complex. Possible causes include sensors being covered in mud or snow during rainy or snowy weather, interfering with signals, or occasional software glitches that a simple restart might fix. However, if the light frequently comes on, you should be wary of potential mechanical issues like faults in the suspension or brake-related components. The safest approach is to avoid driving too fast, especially on slippery roads where losing control is more likely, and then visit a 4S shop as soon as possible to run a diagnostic scan for error codes. Don't push your luck to avoid costly major repairs later. When this light is on, the safety risk is high—don't take it lightly.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

Why does the BMW 320i experience intermittent idling vibrations?

Here is the relevant introduction to BMW idling vibrations: 1. Poor combustion: Idling vibrations are mostly simply attributed to poor combustion, and the solution is straightforward. Since the fuel in the tank cannot guarantee long-term freedom from impurities, nor can it ensure the fuel lines remain clean—gas stations regularly clean their underground fuel tanks, let alone the fuel lines of household cars—impurities and moisture in the fuel lines can cause misfires, cylinder misfires, and vibrations when participating in combustion. You can use S-YOU-PRO fuel additive three times in the fuel tank, followed by running three tanks of fuel. 2. Dirty fuel lines: If the issue is indeed caused by dirty fuel lines, this phenomenon will disappear, and the engine will run smoothly. If it doesn't run smoothly, regular cleaning isn't wrong either. You can take this as a reference.
14
1
Share

Why is there a metal friction sound when the car is driving at low speed?

When the car is driving at low speed, the metal friction sound is caused by the friction between the brake pads and the brake disc. Here are some additional details: 1. Reasons for the metal friction sound at low speed: The gap between the disc brake pads and the disc is very small, sometimes even "zero gap". When the disc is unevenly worn or has sand or stones stuck to it, a "metal friction sound" can occur at low speeds. The braking system is a crucial part of the car, as it affects both the driving stability and safety. 2. Braking system: The main components of the braking system include the vacuum booster pump, master cylinder, wheel cylinder, brake pads, and brake disc. The vacuum booster pump provides assistance, making it easier for the driver to press the brake pedal when braking.
2
2
Share

How long after canceling the subject 2 appointment can I reschedule?

You can reschedule the subject 2 driving test 10 working days after canceling the appointment. Introduction to Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skill test subject. The C1/C2 test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve (commonly known as the S-curve). Basic Operations: Subject 2 requires students to master the basic driving operation essentials and have the basic ability to control the vehicle. They should be proficient in the basic methods of driving on the field and internal roads, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.
17
2
Share

What are the new regulations for driver's license annual review at the age of 60?

Drivers aged 60-69 are not required to submit physical condition certificates, while those aged 70 and above must submit one annually. Annual review deadlines: Holders of B1 licenses should undergo annual review at the vehicle management office within 30 days before the end of each scoring cycle. If no points are recorded during the scoring cycle, the annual review for that year can be exempted, and so on until the driver's license expires. If less than 12 points are recorded during the scoring cycle, an annual review at the vehicle management office is required. Scoring cycle: B2 driver's license holders must undergo annual driver review, which should be completed within 30 days after the end of each scoring cycle at the issuing vehicle management office. However, if there are no accumulated point deduction records during the current scoring cycle, the review for that cycle can be exempted.
3
2
Share

What Are the Causes of Engine Idle Noise?

Here are the causes of engine idle noise: Piston Slap: Piston slap is a common source of abnormal noise. Due to poor lubrication conditions, excessive wear occurs between the piston and cylinder wall, causing the clearance tolerance between the piston and cylinder wall to exceed the normal range. During engine operation, the piston skirt impacts the cylinder wall, producing a crisp "clanking" sound. This is usually more noticeable during idle or low-speed operation. Timing Gear: After prolonged use, coupled with improper gear clearance adjustment and poor lubrication conditions, timing gears can experience excessive wear. In severe cases, the gear teeth may even become worn down, leading to loose meshing between gears. When the engine runs, this produces a "whirring, clattering" sound. Piston Pin Noise: Due to excessive wear of components, the clearance between the piston pin and connecting rod bushing becomes too large, the fit between the connecting rod bushing and small-end bearing becomes loose, and the clearance between the piston pin and piston pin bore becomes excessive. This causes the piston to wobble during movement, colliding with the cylinder wall and generating abnormal noise.
4
2
Share

Should I Drive with ECO Mode On Normally?

It is generally not recommended to drive with ECO mode enabled during normal driving, as ECO mode restricts the engine's power output, reduces the sensitivity of the accelerator pedal, and affects the vehicle's performance. How ECO Mode Works: ECO mode primarily analyzes and evaluates factors that influence fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission fluid temperature. The ECU control unit then calculates the optimal fuel quantity to supply the engine, effectively reducing fuel consumption compared to standard driving modes. In simpler terms, it controls the engine's RPM through appropriate gear selection to minimize unnecessary fuel consumption. Types of ECO Mode: Generally, ECO modes can be divided into passive ECO driving mode and active ECO driving mode. Passive ECO driving mode mainly serves as a reminder or guidance function. Active ECO driving mode usually has a dedicated button; once activated, it alters a series of driving-related settings, such as reducing throttle response (making the accelerator pedal less sensitive), adjusting the transmission shift logic for better fuel economy (earlier upshifts), and in some vehicles, even adjusting the air conditioning output.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.